Advertisement

Process performance of micro-EDM drilling of stainless steel

  • G. D’UrsoEmail author
  • G. Maccarini
  • C. Ravasio
ORIGINAL ARTICLE

Abstract

An experimental campaign based on the execution of through micro-holes on stainless steel plates was carried out using a micro-EDM machine Sarix SX-200. The experimental campaign was carried out by varying several process parameters, namely peak current, voltage and frequency. Tubular electrodes made of two different materials (tungsten carbide and brass) were used. A study of the in progress material removal rate (MRR) and tool wear ratio (TWR) during the drilling process was performed. Some mathematical laws governing the relation between process parameters and performance indexes were defined. Two technological windows representing TWR and MRR as a function of the hole depth, for different electrode materials, were obtained.

Keywords

Micro-EDM Micro-drilling Tool wear ratio Material removal rate Process performance 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    Diver C, Atkinson J, Helmi HJ, Li L (2004) Micro-EDM drilling of tapered holes for industrial applications. J Mater Process Technol 149:296–303CrossRefGoogle Scholar
  2. 2.
    Yu ZY, Zhang Y, Li J, Luan J, Zhao F, Guo D (2009) High aspect ratio micro-hole drilling aided with ultrasonic vibration and planetary movement of electrode by micro-EDM. CIRP Ann Manuf Technol 58:213–216CrossRefGoogle Scholar
  3. 3.
    Yu ZY, Rajurkar KP, Shen H (2002) High aspect ratio and complex shaped blind micro holes by micro EDM. CIRP Ann Manuf Technol 51(1):359–362CrossRefGoogle Scholar
  4. 4.
    Masuzawa T (2000) State of the art of micromachining. CIRP Ann Manuf Technol 49(2):473–488CrossRefGoogle Scholar
  5. 5.
    Egashira K, Morita Y, Hattori Y (2010) Electrical discharge machining of submicron holes using ultrasmall-diameter electrodes. Precis Eng 34:139–144CrossRefGoogle Scholar
  6. 6.
    Jahan MP, Wong YS, Rahman M (2012) Evaluation of the effectiveness of low frequency workpiece vibration in deep-hole micro-EDM drilling of tungsten carbide. J Manuf Process 14:343–359CrossRefGoogle Scholar
  7. 7.
    Fleischer J, Schmidt J, Haupt S (2006) Combination of electric discharge machining and laser ablation in microstructuring of hardened steels. Microsyst Technol 12:697–701CrossRefGoogle Scholar
  8. 8.
    Chern GL, Chuang Y (2006) Study on vibration-EDM and mass punching of microholes. J Mater Process Technol 180:151–160CrossRefGoogle Scholar
  9. 9.
    Chern GL, Wu YJE, Liu SF (2006) Development of a micro-punching machine and study on the influence of vibration machining in micro-EDM. J Mater Process Technol 180:102–109CrossRefGoogle Scholar
  10. 10.
    Jahan MP, Wong YS, Rahman M (2010) A comparative experimental investigation of deep-hole micro-EDM drilling capability for cemented carbide (WC-Co) against austenitic stainless steel (SUS 304). Int J Adv Manuf Technol 46:1145–1160CrossRefGoogle Scholar
  11. 11.
    Pradhan BB, Masanta M, Sarkar BR, Bhattacharyya B (2009) Investigation of electro-discharge micro-machining of titanium super alloy. Int J Adv Manuf Technol 41:1094–1106CrossRefGoogle Scholar
  12. 12.
    D’Urso G, Maccarini G, Merla C, Ravasio C (2012) The influence of electrode shape and material on micro EDM drilling process. Proceedings of the 9th International Conference on Multi-Material Micro Manufacture, Vienna, Austria, October 9–11Google Scholar
  13. 13.
    Kuppan P, Rajadurai A, Narayanan S (2008) Influence of EDM process parameters in deep hole drilling of Inconel 718. Int J Adv Manuf Technol 38:74–84CrossRefGoogle Scholar
  14. 14.
    Denkena B, Hoffmeister HW, Reichstein M, Illenseer S, Hlavac M (2006) Micro-machining processes for microsystem technology. Microsyst Technol 12:659–664CrossRefGoogle Scholar
  15. 15.
    Yu ZY, Masuzawa T, Fujino M (1998) Micro-EDM for three-dimensional cavities—development of uniform wear method. Ann CIRP 47(1):169–172CrossRefGoogle Scholar
  16. 16.
    Pham DT, Ivanov A, Bigot S, Popov K, Dimov S (2007) A study of micro-electro discharge machining electrode wear. J Mech Eng Sci 221:605–612CrossRefGoogle Scholar
  17. 17.
    Lim HS, Son SM, Wong YS, Rahman M (2007) Development and evaluation of an on-machine optical measurement device. Int J Mach Tools Manuf 47(10):1556–1562CrossRefGoogle Scholar
  18. 18.
    Hoffmeister HW, Illenseer S, Hesselbach J (2004) Burr formation and reduction in micro drilling of metals. Production Engineering. Res Dev 11(1):1–4Google Scholar
  19. 19.
    D’Urso G, Longo M, Maccarini G, Ravasio C (2011) Electrical discharge machining of micro holes on titanium sheets. Proc ASME Des Eng Tech Conf 7:417–424Google Scholar

Copyright information

© Springer-Verlag London 2014

Authors and Affiliations

  1. 1.Department of EngineeringUniversity of BergamoDalmineItaly

Personalised recommendations