Advertisement

Developing a 3D colour image reproduction system for additive manufacturing of facial prostheses

  • Kaida Xiao
  • Faraedon Zardawi
  • Richard van Noort
  • Julian M. Yates
ORIGINAL ARTICLE

Abstract

In this study, a new 3D colour image reproduction system is proposed for the automated and accurate additive manufacturing of soft tissue facial prostheses. A framework of 3D colour image reproduction was defined and a protocol for each sub-process was developed for this specific application. Colour management processes were developed and integrated into the proposed 3D image reproduction system; colour profiles for both the 3dMD photogrammetry system and the Z Corp Z510 3D printer were established utilising conventional colour reproduction techniques for 2D images. The soft tissue prototypes of both nose and ear prostheses were produced using the proposed system. The quality of prostheses was evaluated. The results show that the protocol used in the 3D manufacturing process was capable of producing accurate skin colour with fine textures and 3D shape, with significant savings in both time and cost.

Keywords

3D image reproduction Facial soft tissue prostheses Advanced manufacture 3D colour printing 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    Leonardi A, Buonaccorsi S, Pellacchia V, Moricca LM, Indrizzi E, Fini G (2008) Maxillofacial prosthetic rehabilitation using extraoral implants. J Craniofac Surg 19(2):398–405CrossRefGoogle Scholar
  2. 2.
    Hooper SM, Westcott T, Evans PL, Bocca AP, Jagger DC (2005) Implant-supported facial prostheses provided by a maxillofacial unit in a U.K. regional hospital: longevity and patient opinions. J Prosthodont 14(1):32–38CrossRefGoogle Scholar
  3. 3.
    Sachs E, Vezzetti E (2005) Numerical simulation of deposition process for a new 3DP printhead design. J Mater Process Technol 161(3):509–515CrossRefGoogle Scholar
  4. 4.
    Curodeau A, Sachs E, Caldarise S (2000) Design and fabrication of cast orthopedic implants with freeform surface textures from 3-D printed ceramic shell. J Biomed Mater Res 53(5):525–535CrossRefGoogle Scholar
  5. 5.
    Stopp S, Wolff T, Irlinger F, Lueth T (2008) A new method for printer calibration and contour accuracy manufacturing with 3D-print technology. Rapid Prototyp J 14(3):167–172CrossRefGoogle Scholar
  6. 6.
    Dimitrov D, Schreve K, de Beer N (2006) Advances in three dimensional printing–state of the art and future perspectives. Rapid Prototyp J 12(3):136–147CrossRefGoogle Scholar
  7. 7.
    Aldridge K, Boyadjiev SA, Capone GT, DeLeon VB, Richtsmeier JT (2005) Precision and error of three-dimensional phenotypic measures acquired from 3dMD photogrammetric images. Am J Med Genet 138A:247–253CrossRefGoogle Scholar
  8. 8.
    Plooij JM, Swennen GRJ, Rangel FA, Maal TJJ, Schutyser FAC, Bronkhorst FM, Kuijpers–Jagtman AM, Berge SJ (2009) Evaluation of reproducibility and reliability of 3D soft tissue analysis using 3D stereophotogrammetry. Int J Oral Maxillofac Surg 38:267–273CrossRefGoogle Scholar
  9. 9.
    Ferrario VF, Sforza C, Schmitz JH, Santoro F (1999) Three-dimensional facial morphometric assessment of soft tissue changes after orthognathic surgery. Oral Surg Oral Med Oral Pathol Oral Radiol Endod 88(5):549–556CrossRefGoogle Scholar
  10. 10.
    Calignano F, Vezzetti E (2010) Soft tissue diagnosis in maxillofacial surgery: a preliminary study on three-dimensional face geometrical features-based analysis. Aesthet Plast Surg 34(2):200–211CrossRefGoogle Scholar
  11. 11.
    Vezzetti E, Calignano F, Moos S (2010) Computer-aided morphological analysis for maxillo-facial diagnostic: a preliminary study. J Plast Reconstr Aesthet Surg 63(2):218–226CrossRefGoogle Scholar
  12. 12.
    van Noort R (2001) The future of dental devices is digital. Dent Mater 28:3–12CrossRefGoogle Scholar
  13. 13.
    Johnson T (1996) Colour management in graphic art and publication. Pira International, LeatherheadGoogle Scholar
  14. 14.
    CIE (2004) 15.3. Colorimetry. CIE Publication, ViennaGoogle Scholar
  15. 15.
    Hong G, Luo MR, Rhodes PA (2001) A study of digital camera colorimetric characterization based on polynomial modelling. Color Res Appl 26(1):76–84CrossRefGoogle Scholar
  16. 16.
    Xiao K, Zardawi F, van Noort R, Yates JM (2013) Color reproduction for advanced manufacture of soft tissue prostheses. J Dent 41(S5):e15–e23Google Scholar
  17. 17.
    Paravina RD, Majkic G, Del Mar Perez M, Kiat-amnuay S (2009) Color difference thresholds of maxillofacial skin replications. J Prosthodont 18:618–625CrossRefGoogle Scholar

Copyright information

© Springer-Verlag London 2013

Authors and Affiliations

  • Kaida Xiao
    • 1
  • Faraedon Zardawi
    • 1
    • 2
  • Richard van Noort
    • 1
  • Julian M. Yates
    • 3
  1. 1.Academic Unit of Restorative Dentistry, School of Clinical DentistryUniversity of SheffieldSheffieldUK
  2. 2.Department of Periodontology, School of DentistryUniversity of SulaimaniSlemaniIraq
  3. 3.Department of Oral & Maxillofacial Surgery, School of DentistryUniversity of ManchesterManchesterUK

Personalised recommendations