Advertisement

Structural and Multidisciplinary Optimization

, Volume 60, Issue 5, pp 2177–2187 | Cite as

Design optimization of a newly developed aluminum-steel multi-material electric bus body structure

  • C. L. Fu
  • Y. C. BaiEmail author
  • C. Lin
  • W. W. Wang
Industrial Application
  • 192 Downloads

Abstract

Due to the constraints of power battery energy density, light-weight electric bus body structure is attracting more and more attentions with the capability to extend mileage. In this paper, an aluminum-steel multi-material electric bus body structure is newly developed and corresponding design optimization is performed for lightweight design while satisfying the constraints. The finite element model of the bus body structure is constructed and validated by experimental modal test. The optimization objective is to minimize the total mass, while bending, torsional stiffness, bending and torsional frequency are chosen as the corresponding constraints. The thicknesses of the pre-determined components are screened out using sensitivity analysis to determine the candidate design variables. Continuous and discrete gradient-based optimizers are employed to generate the optimal solutions, which are demonstrated that these new designs could bring benefits in terms of structural performance and structural weight.

Keywords

Electric bus Lightweight design Design optimization; Aluminum-steel Modal tests 

Notes

Funding information

This work is supported by the National Natural Science Foundation of China (Grant No. 51805032), Beijing Institute of Technology Research Fund Program for Young Scholars, and the Science and Technology Planning Project of Beijing City (NO. Z161100001416007).

Compliance with ethical standards

Conflict of interest

The authors declare that they have no conflict of interest.

Supplementary material

158_2019_2292_MOESM1_ESM.hist (1.6 mb)
ESM 1 (HIST 1611 kb)
158_2019_2292_MOESM2_ESM.hist (1 mb)
ESM 2 (HIST 1025 kb)

References

  1. Airale A, Carello M, Scattina A (2011) Carbon fiber monocoque for a hydrogen prototype for low consumption challenge. Mater Werkst 42(5):386–392CrossRefGoogle Scholar
  2. Bai YC, Zhou HS, Lei F, Lei HS (2018) An improved numerically-stable equivalent static loads (ESLs) algorithm based on energy-scaling ratio for stiffness topology optimization under crash loads. Struct Multidiscip Optim 59:117–130MathSciNetCrossRefGoogle Scholar
  3. Charles D, Pascal F (2018) Geometrical shape optimization in fluid mechanics using freefem++. Struct Multidiscip Optim 58(6):2761–2788MathSciNetCrossRefGoogle Scholar
  4. Chen JQ, Lan CF (2017) Design and analysis approaches to automotive structural lightweight. Beijing institute technology press, Beijing, China, pp 169–174Google Scholar
  5. Chiandussi G, Avalle M (2002) Maximization of the crushing performance of a tubular device by shape optimization. Comput Struct 80(27–30):2425–2432CrossRefGoogle Scholar
  6. Chuang CH, Chen SK, Yang RJ, Vogiatzis P (2017) Topology optimization with additive manufacturing consideration for vehicle load path development. Int J Numer Methods Eng 113(8):1434–1445MathSciNetCrossRefGoogle Scholar
  7. Deng SG, Krishnan S (2015) Multi-constrained topology optimization via the topological sensitivity. Struct Multidiscip Optim 51(5):987–1001MathSciNetCrossRefGoogle Scholar
  8. Deng SG, Krishnan S (2016) Multi-constrained 3D topology optimization via augmented topological level-set. Comput Struct 170:1–12CrossRefGoogle Scholar
  9. Fan ZJ, Su RY, Gui LJ (2011) Multi-objective optimization for bus body with strength and rollover safety constraints based on surrogate models. Struct Multidiscip Optim 44(3):431–441MathSciNetCrossRefGoogle Scholar
  10. Gang WJ, Choi YM, Choi GJ (2008) Discrete thickness optimization of an automobile body by using the continuous-variable-based method. J Mech Sci Technol 22(1):41–49CrossRefGoogle Scholar
  11. Gao FL, Bai YC, Lin C (2018) A time-space kriging-based sequential metamodeling approach for multi-objective crashworthiness optimization. Appl Math Model 69:378–404MathSciNetCrossRefGoogle Scholar
  12. Hannan MA, Azidin FA, Mohamed A (2014) Hybrid electric vehicles and their challenges: a review. Renew Sust Energ Rev 29:135–150CrossRefGoogle Scholar
  13. Hu P, Han X, Silva LD et al (2013) Strength prediction of adhesively bonded joints under cyclic thermal loading using a cohesive zone model. Int J Adhes Adhes 41(3):6–15CrossRefGoogle Scholar
  14. Jin R, Chen W, Simpson TW (2001) Comparative studies of metamodelling techniques under multiple modelling criteria. Struct Multidiscip Optim 23(1):1–13CrossRefGoogle Scholar
  15. Joost WJ, Krajewski PE (2017) Towards magnesium alloys for high-volume automotive applications. Scr Mater 128:107–112CrossRefGoogle Scholar
  16. Kang N, Kokkolaras M, Papalambros PY et al (2014) Optimal design of commercial vehicle systems using analytical target cascading. Struct Multidiscip Optim 50(6):1103–1114CrossRefGoogle Scholar
  17. Kaya A, Mehmet S, Fehim F (2004) Effects of various parameters on dynamic characteristics in adhesively bonded joints. Mater Lett 58(27–28):3451–3456CrossRefGoogle Scholar
  18. Klein T, Mayer S, Usategui L et al (2017) Mechanical behavior and related microstructural aspects of a nano-lamellar tial alloy at elevated temperatures. Acta Mater 128:440–450CrossRefGoogle Scholar
  19. Li C, Jeswist J, Kim Y (2015) Conceptual and detailed design of an automotive engine cradle by using topology, shape, and size optimization. Struct Multidiscip Optim 51(2):547–564CrossRefGoogle Scholar
  20. Li L, Wang X, Song J (2017) Fuel consumption optimization for smart hybrid electric vehicle during a car-following process. Mech Syst Signal Process 87(1):17–29CrossRefGoogle Scholar
  21. Lin C, Bai YC, Gao FL (2018) An intelligent sampling approach for metamodel-based multi-objective optimization with guidance of the adaptive weighted-sum method. Struct Multidiscip Optim 57(3):1047–1060MathSciNetCrossRefGoogle Scholar
  22. Liu J, Zhang Y (2017) Soft network materials with isotropic negative poisson’s ratios over large strains. Soft Matter 14(5):693–703CrossRefGoogle Scholar
  23. Luo AA (2013) Magnesium casting technology for structural applications. J Magn Alloy 1(1):2–22CrossRefGoogle Scholar
  24. Pedersen NL, Pedersen P (2018) Buckling load optimization for 2D continuum models with alternative formulation for buckling load estimation. Struct Multidiscip Optim 58(5):2163–2172MathSciNetCrossRefGoogle Scholar
  25. Shan S, Kang SH, Zhao ZH et al (2015) Design of planar isotropic negative Poisson’s ratio structures. Extreme Mech Lett 4:96–102CrossRefGoogle Scholar
  26. Wu T, Liu K, Tovar A (2017) Multiphase topology optimization of lattice injection molds. Comput Struct 192:71–82CrossRefGoogle Scholar
  27. Yang J, Lu H, Lin G (2018) Progress on discontinuously reinforced titanium matrix composites. J Alloys Compd 767:1196–1215CrossRefGoogle Scholar
  28. Zhong W, Su RY, Gui LG, Fan ZJ (2016) Multi-objective topology and sizing optimization of bus body frame. Struct Multidiscip Optim 54(3):701–714CrossRefGoogle Scholar

Copyright information

© Springer-Verlag GmbH Germany, part of Springer Nature 2019

Authors and Affiliations

  • C. L. Fu
    • 1
    • 2
  • Y. C. Bai
    • 1
    • 2
    Email author
  • C. Lin
    • 1
    • 2
  • W. W. Wang
    • 1
    • 2
  1. 1.National Engineering Laboratory for Electric Vehicles, School of Mechanical EngineeringBeijing Institute of TechnologyBeijingChina
  2. 2.Collaborative Innovation Center of Electric Vehicles in BeijingBeijing Institute of TechnologyBeijingChina

Personalised recommendations