Structural and Multidisciplinary Optimization

, Volume 57, Issue 3, pp 965–975 | Cite as

Structural design and global sensitivity analysis of the composite B-pillar with ply drop-off

  • Qiming Liu
  • Yongjun Li
  • Lixiong Cao
  • Fei Lei
  • Qiong Wang
RESEARCH PAPER

Abstract

Vehicle lightweight and safety design becomes an increasingly critical issue nowadays. In order to improve the crashworthiness of side impact and roof crush with the consideration of the manufacturing process, a new composite B-pillar structure with ply drop-off is proposed in this paper. It improves the crashworthiness by changing the section thickness of structure and reduces the weight of B-pillar. The ply drop-off regions on the outer part and inner part of B-pillar are divided into three sub-laminates respectively, named as thick panel, taper panel and thin panel. The thickness of the panel are determined by the number of lay-up. Based on traditional sensitivity analysis, this paper derives some new equations and clearly evaluates and quantifies the importance of uncertainty design parameters. Finally, the comprehensive performance of the lightweight and crashworthiness for the composite B-pillar with ply drop-off is improved through structural optimization.

Keywords

Composite structure B-pillar Ply drop-off structure Crashworthiness Lightweight Sensitivity analysis 

Notes

Acknowledgements

This work is supported by the National Science Foundation of China (51575171, 11232004) and the graduate student research innovation project of Hunan province (CX2016B090).

References

  1. Allegri G, Kawashita LF, Backhouse R, Wisnom MR, Hallett SR (2009) On the optimization of tapered composite laminates in preliminary structural design. IX Microelectronics Students ForumGoogle Scholar
  2. Bailie JA, Ley RP, Pasricha A (1997) A summary and review of composite laminate design guidelines. NASA Langley Research Center, Hampton, VA, Technical Report No. NASA, NAS1-19347Google Scholar
  3. Bathe KJ, Walczak J, Guillermin O, Bouzinov PA, Chen HY (1999) Advances in crush analysis. Comput Struct 72(1):31–47CrossRefMATHGoogle Scholar
  4. Chen T, Chirwa EC, Mao M, Latchford J (2007) Rollover far side roof strength test and simulation. Int J Crashworthiness 12(1):29–39CrossRefGoogle Scholar
  5. Chen D, Lu G, He L, Li W, Yuan J (2015) Warpage of injection-molded automotive B pillar trim fabricated with ramie fiber-reinforced polypropylene composites. J Reinf Plast Compos 34(14):1144–1152CrossRefGoogle Scholar
  6. Cui A, Xu LJ, Zhang XB, Yang Q (2013) Design of lightweight hybrid materials for the cab body-in-white of a commercial vehicle based on multi-objective optimization. Adv Mater Res 631-632:281–286CrossRefGoogle Scholar
  7. Feraboli P, Masini A (2004) Development of carbon/epoxy structural components for a high performance vehicle. Compos Part B 35(4):323–330CrossRefGoogle Scholar
  8. Feraboli P, Masini A, Taraborrelli L, Pivetti A (2007) Integrated development of CFRP structures for a topless high performance vehicle. Compos Struct 78(4):495–506CrossRefGoogle Scholar
  9. Guo ZY, Xiao DC, Yong C, Xi CZ, Qing ZS (2006) B-pillar optimization and its effect on side impact safety. Automot Eng 28(11):972975Google Scholar
  10. Hamza K, Saitou K, Nassef A (2003) Design optimization of a vehicle b-pillar subjected to roof crush using mixed reactive taboo search. Chicago, Illinois, pp 1-9Google Scholar
  11. He K, Hoa SV, Ganesan R (2000) The study of tapered laminated composite structures: a review. Compos Sci Technol 60(14):2643–2657CrossRefGoogle Scholar
  12. Hobbs CA, Gloyns PF, Rattenbury SJ (1999) European new car assessment programme (EuroNCAP) assessment protocol and biomechanical limitsGoogle Scholar
  13. Irisarri FX, Lasseigne A, Leroy FH, Riche RL (2014) Optimal design of laminated composite structures with ply drops using stacking sequence tables. Compos Struct 107(1):559–569CrossRefGoogle Scholar
  14. Kopp G, Beeh E, Schšll R, Kobilke A, Stra P, Krieschera M (2012) New lightweight structures for advanced automotive vehicles–safe and modular. Procedia-Soc Behav Sci 48:350–362CrossRefGoogle Scholar
  15. Lei F, Chen X, Chen GD, Guan FJ (2013) Structural optimization design of B-pillar considering roof crush and side impact requirements in passenger car. China Mechanical Engineering 24(11):15–26Google Scholar
  16. Lei F, Chen X, Xie XP, Zhu J (2015) Research on three main lightweight approaches for automotive body engineering considering materials, Structural Performances and Costs, SAE Technical PaperGoogle Scholar
  17. Mao M, Chirwa EC, Chen T, Latchford J (2004) Static and dynamic roof crush simulation using LS-DYNA3D. Int J Crashworthiness 9(5):495–504CrossRefGoogle Scholar
  18. Marklund PO, Nilsson L (2001) Optimization of a car body component subjected to side impact. Struct Multidiscip Optim 21(5):383–392CrossRefGoogle Scholar
  19. Marzougui D, Samaha R, Cui C, Kan C (2012) Extended validation of the finite element model for the 2001 ford Taurus passenger sedan. Report, National Crash Analysis Center, George Washington University, Washington, DC, USAGoogle Scholar
  20. Mukherjee A, Varughese B (1999) Development of a specialised finite element for the analysis of composite structures with ply drop-off. Compos Struct 46(1):1–16CrossRefGoogle Scholar
  21. Mukherjee A, Varughese B (2001) Design guidelines for ply drop-off in laminated composite structures. Compos Part B Eng 32(2):153–164CrossRefGoogle Scholar
  22. NHTSA NCAP (2013) New car accessment program. Docket No. NHTSA-2013-0076. U.S. Government, Washington, DC. https://www.federalregister.gov/documents/2013/09/30/2013-23700/new-car-assessment-program-ncap. Accessed 09/30/2013
  23. NHTSA FMVSS 216 (2010) Federal motor vehicle safety standards; roof crush resistance. Docket No. NHTSA-2009-0093. U.S. Government, Washington, DC. https://www.nhtsa.gov/fmvss/roof-crush-resistance. Accessed 04/07/2010
  24. Obradovic J, Boria S, Belingardi G (2012) Lightweight design and crash analysis of composite frontal impact energy absorbing structures. Compos Struct 94(2):423–430CrossRefGoogle Scholar
  25. Pan F, Zhu P, Zhang Y (2010) Meta model-based lightweight design of B-pillar with TWB structure via support vector regression. Comput Struct 88(1–2):36–44CrossRefGoogle Scholar
  26. Sobol’ IM (1993) Sensitivity estimates for nonlinear mathematical models. Math Model Comput Experiment 1:407–414MathSciNetMATHGoogle Scholar
  27. Tang Y (2009) Study on influence factors for crush intrusion in passenger vehicle front-to-side impact. China Mechanical Engineering 20(24):3013–3019Google Scholar
  28. Vidyashankar BR, Krishna Murty AV (2001) Analysis of laminates with ply drops. Compos Sci Technol 61:749–758CrossRefGoogle Scholar
  29. Wallentowitz H, Adam H (1996) Predicting the crashworthiness of vehicle structures made by lightweight design materials and innovative joining methods. Int J Crashworthiness 1(2):163–180CrossRefGoogle Scholar
  30. Wang B, Zhou C (2017) The imperfection-sensitivity of origami crash boxes. Int J Mech Sci 121:58–66CrossRefGoogle Scholar
  31. Xu F, Sun G, Li G, Li Q (2013) Crashworthiness design of multi-component tailor-welded blank (TWB) structures. Struct Multidiscip Optim 48(3):653–667CrossRefGoogle Scholar
  32. Yang X, Zhang Z, Zheng J, Duan S (2015) Multi-conditions/multi-objective optimization Design of the Variable Cross-Section of composite front bumper. Automot Eng 287(C):32–43Google Scholar
  33. Zeng F, Xie H, Liu Q, Li F, Tan W (2015) Design and optimization of a new composite bumper beam in high-speed frontal crashes. Struct Multidiscip Optim 53(1):1–8Google Scholar
  34. Zhang XW, Su H, Yu TX (2009) Energy absorption of an axially crushed square tube with a buckling initiator. Int J Impact Eng 36(3):402–417CrossRefGoogle Scholar

Copyright information

© Springer-Verlag GmbH Germany 2017

Authors and Affiliations

  • Qiming Liu
    • 1
  • Yongjun Li
    • 1
  • Lixiong Cao
    • 1
  • Fei Lei
    • 1
  • Qiong Wang
    • 1
  1. 1.State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body, College of Mechanical and Vehicle EngineeringHunan UniversityChangshaPeople’s Republic of China

Personalised recommendations