Abstract
As charcoal is used in the silicon metal process, reactivity towards SiO is one of the most important properties that has strong effects on silicon recovery. The purpose of this study was to analyze anatomical properties of wood and charcoal, define a procedure to express the SiO reactivity in a simpler and more cost-efficient manner and indicate one or more clones of Eucalyptus with the greatest potential for production of charcoal to silicon use. Three hybrid clones of Eucalyptus urophylla × Eucalyptus grandis were used for the study and the coke was investigated for comparison purposes. Morphological analysis of fiber and vessels was carried out in wood, and the fiber wall area was determined on charcoal. The number of reactivity was calculated in five different protocols, based on the SiO reactivity test. To classify the charcoal with the greatest potential for silicon use, the parameter Readily Available Fixed Carbon Stock was created, based on charcoal`s most important properties. All charcoals had significantly higher SiO-reactivity than coke. In addition, an increasing trend of charcoal SiO-reactivity was found with decreasing wood basic density, apparent density and fiber wall area of charcoal, which are connected to porosity. All the reductant materials presented similar readily available fixed carbon stock. The developed procedure used for SiO reactivity measurements was a useful tool to classify charcoal for use in the silicon production process.
Similar content being viewed by others
References
Assis MR, Brancheriau L, Napoli A, Trugilho PF (2016) Factors affecting the mechanics of carbonized wood: literature review. Wood Sci Technol 50:519–536. https://doi.org/10.1007/s00226-016-0812-6
Brazilian Association of Technical Standards ABNT (1981) NBR 6923—charcoal: sampling and sample preparation. Brazilian Association of Technical Standards, Rio de Janeiro (In Portuguese)
Brazilian Association of Technical Standards ABNT (2003) NBR 11941: wood—determination of basic density. Brazilian Association of Technical Standards, Rio de Janeiro (In Portuguese)
Brazilian Tree Industry Report (2019) Brazilian Tree Industry. https://iba.org/publicacoes. Accessed 03 Nov 2020
Buø TV, Gray RJ, Patalsky RM (2000) Reactivity and petrography of cokes for ferrosilicon and silicon production. Int J Coal Geol 43:243–256. https://doi.org/10.1016/S0166-5162(99)00062-2
Costa ACS, Leal CS, Santos LC, Carvalho AMML, Oliveira AC, Pereira BLC (2017) Properties of heartwood and sapwood of Eucalyptus camaldulensis. Braz J Wood Sci 8:10–20. https://doi.org/10.12953/2177-6830/rcm.v8n1p10-20
Evangelista WV, Silva JdC, Valle MLA, Xavier BA (2010) Quantitative anatomical features of the wood of Eucalyptus camaldulensis Dehnh. and Eucalyptus urophylla S. T. Blake clones. Scientia Forestalis 38:273–284
Ferreira ATB (2013) Evaluation of anatomical structure and apparent density of wood and charcoal from Eucalyptus sp. and Corymbia sp. trees. São Paulo University, São Paulo
German Institute for Standards DIN (1993) DIN 66131: Determination of specific surface area of solids by gas adsorption using the method of Brunauer, Emmett and Teller (BET). Deutsches Institut für Normung, Berlim
German Institute for Standards DIN (2009a) DIN EN 14775: determination of ash content. Deutsches Institut für Normung, Berlim
German Institute for Standards DIN (2009b) DIN EN 15148: solid biofuels—determination of the content of volatile matter. Deutsches Institut für Normung, Berlim
German Institute for Standards DIN (2011) DIN EN 15104: determination of total content of carbon, hydrogen and nitrogen—instrumental methods. German Institute for Standards, Berlin
International Association of Wood Anatomists IAWA (1989) IAWA list of microscopic features for hardwood identification. IAWA Bull 10:1–116
International Organisation for Standarization ISO (2008) ISO 21068: chemical analysis of silicon carbide containing raw materials and refractory products—part 2: determination of loss on ignition, total carbon, free carbon and silicon carbide, total and free silica and total and free silicon. International Organization For Standardization, Geneva
Isbaex C (2014) Influence of density of charcoal in the production of silicon metal. Dissertation, Federal University of Viçosa
Kan T, Strezov V, Evans TJ (2016) Lignocellulosic biomass pyrolysis: a review of product properties and effects of pyrolysis parameters. Renew Sustain Energy Rev 57:1126–1140. https://doi.org/10.1016/j.rser.2015.12.185
Khalil LB (1999) Porosity characteristics of chars derived from different lignocellulosic materials. Adsorpt Sci Technol 17:729–739
Kim V, Tolymbekov M, Kim S, Ulyeva G, Kudarinov S (2013) Carbon reductant for silicon metal production. In: Proceedings of XIII international ferroalloys congress, Almaty, Kazakhstan, June 9–13 2013, pp 519–526.
F (2018) SiC production using SiO2 and C agglomerates. Thesis, Norwegian University of Science and Technology
Lindstad T, Gaal S, Hansen S, Prytz S (2007) Improved SINTEF SiO-reactivity test. In: Proceedings of XI international ferroalloys congress New Dehli, India, February 18–21
Lüdke MC (2018) The metal silicon route: from the extraction of quartz to the production of photovoltaic cells: monograph. Federal University of Santa Catarina, Florianópolis (In Portuguese)
Mackay DM, Roberts PV (1982) The influence of pyrolysis conditions on yield and microporosity of lignocellulosic chars. Carbon 20:95–104
Monsen B, Lindstad T, S. Osen K How the ferroalloy industry can meat greenhouse gas regulations. In: Proceedings of XII international ferro alloy congress, Helsinki, Finland, 2010, pp 63–70
Monsen B, Kolbeinsen L, Prytz S, Myrvågnes V, Tang K (2013) Possible use of natural gas for silicon or ferrosilicon production. In: Proceedings of XIII international ferroalloys congress Almaty, Kazakhstan, 2013, pp 467–478.
Myrhaug EH (2003) Non-fossil reduction materials in the silicon process—properties and behaviour. Thesis, Norwegian University of Science and Technology
Myrvågnes V (2008) Analyses and characterization of fossil carbonaceous materials for silicon production. Thesis, Norwegian University of Science and Technology
Noumi S, Rousset P, Carneiro AdCO, Blina J (2016) Upgrading of carbon-based reductants from biomass pyrolysis underpressure. J Anal Appl Pyrol 118:278–285. https://doi.org/10.1016/j.jaap.2016.02.011
Palermo GPdM, Latorraca JVdF, Carvalho AMd, Calonego FW, Severo ETD (2015) Anatomical properties of Eucalyptus grandis wood and transition age between the juvenile and mature woods. Eur J Wood Prod 73:775–780. https://doi.org/10.1007/s00107-015-0947-4
Pereira BLC, Oliveira AC, Carvalho AMML, Carneiro ACO, Vital BR, Santos LC (2013) Correlations among the heart/sapwood ratio of Eucalyptus wood, yield and charcoal properties. Scientia Forestalis 41:217–225
Ramos DC, Carneiro ACO, Tangstad M, Saadieh R, Pereira BLC (2019) Quality of wood and charcoal from eucalyptus clones for metallurgical use. Floresta e Ambiente 26:e20180435. https://doi.org/10.1590/2179-8087.043518
Riva L, Nielsen HK, Skreiberg O et al (2019) Analysis of optimal temperature, pressure and binder quantity for the production of biocarbon pellet to be used as a substitute for coke. Appl Energ 256:113933. https://doi.org/10.1016/j.apenergy.2019.113933
Schei A, Tuset JK, Tveit H (1998) Production of high silicon alloys. Trondheim, Norway
Silva MRd, Machado GO, Deiner J, Junior CC (2010) Permeability measuremens of brazilian Eucalyptus. Mater Res 13:281–286. https://doi.org/10.1590/S1516-14392010000300002
Trugilho PF, Lima JT, Mendes LM (1996) Influence of age on the physical-chemical and anatomical characteristics of the wood of Eucalyptus saligna. Cerne 2:96–111
Tuset JK, Raaness O (1976) Reactivity of reduction materials in the production of silicon, silicon-rich ferroalloys and silicon carbide. In: Proceedings of 34th electric furnace conference, St.Louis, Mo., USA, 1976, pp 101–107
United States Geological Survey (2020) Silicon statistics and information. https://pubs.usgs.gov/periodicals/mcs2020/mcs2020-silicon.pdf. Accessed 03 Nov 2020
Videm T (1995) Reaction rate of reduction materials for the (ferro)silicon process. In: Proceedings of VII international ferro alloys congress Trondheim, Norway, 1995, pp 221–230
Vital BR (1984) Methods for wood density determination. Federal University of Viçosa, Viçosa (In Portuguese)
Vorob’ev VP (2017) Carborundum-bearing reducing agents in high-silicon alloy production. Steel Transl 47:688–690. https://doi.org/10.3103/S0967091217100114
Acknowledgements
We would like to thank the Coordination of Superior Level Staff Improvement (CAPES), Foundation for Research Support of the State of Minas Gerais (FAPEMIG), Center of Research-based Innovation of Norway (SFI), Research Company SINTEF and Brazilian National Council for Scientific and Technological Development (CNPq).
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Ramos, D.C., Carneiro, A.C.O., Tangstad, M. et al. Reactivity assessment of charcoal for use in silicon production. Eur. J. Wood Prod. 79, 537–546 (2021). https://doi.org/10.1007/s00107-021-01683-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00107-021-01683-5