Advertisement

European Journal of Wood and Wood Products

, Volume 76, Issue 6, pp 1757–1759 | Cite as

Comparison of two dye uptake measurement methods for dyed wood veneer assessment

  • Ngoc Nguyen
  • Barbara Ozarska
  • Macarthur Fergusson
  • Peter Vinden
Brief Original
  • 51 Downloads

Abstract

Dyeing of veneer is an important value-adding process, particularly for young plantation hardwood species, which often have uneven colour and “dull appearance”. An important indicator in the assessment of the performance of veneer dyeing process is the dye uptake. This study compared two different methods of measuring dye uptake of dyed veneers; by using either liquid uptake based method or spectrophotometry method. The study revealed that there was a significant difference in the percentage of dye uptake determined by the two methods, but the overall results in the correlation between the percentage of dye uptake and the dyeing parameters had a similar trend.

Notes

Acknowledgements

The authors are grateful for the support of the Australian Centre for International Agricultural Research (ACIAR), the University of Melbourne, School of Ecosystem and Forest Sciences, and RMIT University, Centre for Advanced Materials and Performance Textiles. Australian Bluegum Plantations of Victoria are also acknowledged for providing the plantation resource, assistance with labour and equipment and access to the trial site. The authors are indebted to those working at Salisbury Research Facility Centre, Department of Agriculture and Fisheries, Queensland, Australia for their great help in the specimen preparation and guidance.

References

  1. Deng H, Liu Y (2010) Study on environmental-friendly dyeing processes of fast-growing plantation veneers. Paper presented at the 4th international conference on bioinformatics and biomedical engineering (iCBBE), Chengdu, China, 2010Google Scholar
  2. Li S, Liu Y (2012) Using ultrasonic treatment on wood veneer dyeing. Paper presented at the 2nd international conference on electronic and mechanical engineering and information technologyGoogle Scholar
  3. Pradhan SK, Tarafder PK (2016) A scheme for performance evaluations of UV–Visible spectrophotometer by standard procedures including certified reference materials for the analysis of geological samples. Mapan 31(4):275–281CrossRefGoogle Scholar
  4. Sedighi-Gilani M, Vontobel P, Lehmann E, Carmeliet J, Derome D (2014) Liquid uptake in Scots pine sapwood and hardwood visualized and quantified by neutron radiography. Mater Struct 47(6):1083–1096.  https://doi.org/10.1617/s11527-013-0112-7 CrossRefGoogle Scholar
  5. Sugiyanto K (2003) Modification of oil palm stem properties using microwave technology. Thesis, University of Melbourne, Institute of Land and Food ResourcesGoogle Scholar
  6. Yang Z, Zhiming Y, Xiaofeng W (2015) Comparison among parameters affecting vertical vacuum dyeing of Populus cathayana Rehd. For Prod J 65(3–4):123–128Google Scholar

Copyright information

© Springer-Verlag GmbH Germany, part of Springer Nature 2018

Authors and Affiliations

  1. 1.School of Ecosystem and Forest Sciences, Faculty of ScienceThe University of MelbourneRichmondAustralia
  2. 2.Centre for Materials Innovation and Future FashionRMIT UniversityBrunswickAustralia

Personalised recommendations