Advertisement

European Journal of Wood and Wood Products

, Volume 76, Issue 6, pp 1571–1580 | Cite as

Evaluation of the sensory roughness of some coated wood surfaces by image analysis

  • Masashi Nakamura
  • Yuri Kikuchi
  • Shugo Hotta
  • Yuko Fujiwara
  • Takahiro Konoike
Original
  • 338 Downloads

Abstract

Sensory roughness is one of the most important factors that determines the quality and/or value of various wood products. The aim of the present study was to confirm whether the sensory roughness of coated wood surfaces could be estimated by the here proposed image analysis. Twelve white oak (Quercus alba) fancy veneer overlaid plywood samples were prepared with two types of grains and six coating specifications. Forty participants subjectively evaluated the sensory roughness of the samples by rubbing their surfaces without being able to see them. Sample surface images were acquired with a goniophotometric method and were submitted to an image analysis to calculate lightness differences (contrast) between relatively small areas as image characteristics. Three surface profile parameters were also measured based on the conventional stylus method. Three-way analyses of variance for the evaluation of sensory roughness revealed significant main effects of the coating specification and the rubbing direction. Although contrast and surface profile parameters were hard to estimate in terms of sensory roughness for spiny surfaces, both measures were well correlated to sensory roughness for porous surfaces. In particular, the linearity between the sensory roughness of the porous surfaces and contrast was equal to or greater than that of the surface profile parameters.

Notes

References

  1. Fujiawara Y, Fujii Y, Sawada Y, Okumura S (2001) Development of a parameter to reflect the roughness of a wood surface that corresponds to tactile roughness. Holz Roh Werkst 59:351–355CrossRefGoogle Scholar
  2. Fujii Y, Yoshizane M, Okumura S (1997) Evaluation of surface roughness by various parameters Ι. Relationship between several roughness parameters and tacitle roughness (in Japanese). Mokuzai Gakkaishi 43:574–579Google Scholar
  3. Fujiwara Y, Inui K, Fujii Y, Sawada Y, Okumrua S (1998) An approach to the three-dimensional evaluation of the surface roughness of wood. Relationship between distribution of peaks on the surface and tactile roughness (in Japanese). Mokuzai Gakkaishi 44:447–451Google Scholar
  4. Fujiwara Y, Fujii Y, Sawada Y, Okumura S (2004) Assessment of wood surface roughness: a comparison between tactile roughness and three-dimensional parameters derived using a robust Gaussian regression filter. J Wood Sci 50:30–40CrossRefGoogle Scholar
  5. Fujiwara Y, Fujii Y, Okumura S (2005) Relationship between roughness parameters based on material ratio curve and tactile roughness for sanded surfaces of two hardwoods. J Wood Sci 51:274–277CrossRefGoogle Scholar
  6. Hu C, Afzal MT (2005) Automatic measurement of wood surface roughness by laser imaging. Part I: Development of laser imaging system. Forest Prod J 55(12):158–163Google Scholar
  7. ISO 16610-32 (2009) Geometrical product specifications (GPS)—filtration—Part 32: Robust profile filters: spline filters. International Organization for StandardizationGoogle Scholar
  8. ISO 25178-2 (2012) Geometrical product specifications (GPS)—surface texture: areal—Part 2: terms, definitions and surface texture parameters. International Organization for StandardizationGoogle Scholar
  9. JIS B0601 (2001) Geometrical product specifications (GPS)—surface texture: profile method—terms, definitions and surface texture parameters. Japanese Standards Association (JSA)Google Scholar
  10. JIS B0671-2 (2002) Geometrical product specification (GPS)—surface texture: profile method; surfaces having stratified functional properties—Part 2: height characterization using the linear material ratio curve. Japanese Standards Association (JSA)Google Scholar
  11. Lundberg IÅS, Porankiewicz B (1995) Studies of non-contact methods for roughness measurements on wood surface. Holz Roh Werkst 53:309–314CrossRefGoogle Scholar
  12. Nakamura M, Matsuo M, Nakano T (2010) Determination of the change in appearance of lumber surfaces illuminated from various directions. Holzforschung 64:251–257Google Scholar
  13. Nakamura M, Miyake Y, Nakano T (2012) Effect of image characteristics of edge-grain patterns on visual impressions. J Wood Sci 58:505–512CrossRefGoogle Scholar
  14. Nakamura M, Nakagawa S, Nakano T (2015) Evaluation of visual impact of multiple image characteristics observed in edge-grain patterns. J Wood Sci 61:19–27CrossRefGoogle Scholar
  15. Ramanakoto MF, Andrianantenaina AN, Ramananantoandro T, Eyma F (2017) Visual and visuo-tactile preferences of Malagasy consumers for machined wood surfaces for furniture: acceptability thresholds for surface parameters. Eur J Wood Prod 75:825–837CrossRefGoogle Scholar
  16. Ramananantoandro T, Larricq P, Eterradossi O (2014) Relationships between 3D roughness parameters and visuotactile perception of surfaces of maritime pinewood and MDF. Holzforschung 68(1):93–101CrossRefGoogle Scholar
  17. Sadoh T, Nakato K (1987) Surface properties of wood in physical and sensory aspects. Wood Sci Technol 21:111–120CrossRefGoogle Scholar
  18. Sandak J, Tanaka C (2003) Evaluation of surface smoothness by laser displacement sensor 1: effect of wood species. J Wood Sci 49:305–311CrossRefGoogle Scholar
  19. Sandak J, Tanaka C (2005) Evaluation of surface smoothness using a light-sectioning shadow scanner. J Wood Sci 51:270–273CrossRefGoogle Scholar
  20. Sandak J, Tanaka C, Ohtani T (2004) Evaluation of surface smoothness by a laser displacement sensor II: comparison of lateral effect photodiode and multielement array. J Wood Sci 50:22–27CrossRefGoogle Scholar

Copyright information

© Springer-Verlag GmbH Germany, part of Springer Nature 2018

Authors and Affiliations

  1. 1.Division of Forest and Biomaterials Science, Graduate School of AgricultureKyoto UniversityKyotoJapan
  2. 2.Tsukuba Research InstituteSumitomo Forest Co., Ltd.TsukubaJapan

Personalised recommendations