European Journal of Wood and Wood Products

, Volume 76, Issue 3, pp 989–997 | Cite as

Production and characterization of particleboards from cork-rich Quercus cerris bark

  • Nadia Lakreb
  • Nusret As
  • Volkan Gorgun
  • Umut Sen
  • M. Glória Gomes
  • Helena Pereira
Original
  • 82 Downloads

Abstract

Single-layered particleboards were produced from granulated Quercus cerris bark containing cork and phloem granules using standard hot-press equipment and phenol–formaldehyde resin. The experimental boards were tested for thickness swelling, mechanical strength and thermal properties. Scanning electron microscopy observations were carried out to analyze the panel structure. The results showed that Q. cerris bark particleboards had low thickness swelling in water, high resistance to thermal degradation and high calorific values but their mechanical strength was below that of commercial wood particleboards. The produced Q. cerris bark particleboards were adequate for exterior applications where mechanical strength is not the key factor. Potential for process and feedstock optimization was acknowledged.

Notes

Acknowledgements

The authors thank Professor Angelica de Cássia Carneiro and LAPEM Laboratory of Universidade Federal de Viçosa from Brazil, and Dr. Solange Araújo from Centro de Estudos Florestais (CEF), Instituto Superior de Agronomia, Portugal for their kind help in thermogravimetric and higher heating value determinations. Funding from Fundação para a Ciência e a Tecnologia (Portugal) is acknowledged for the corresponding author (Post-doctoral Grant, SFRH/BPD/87632/2012) and for the base funding of CEF (AGR/UID00239/2013).

References

  1. Anjos O, Pereira H, Rosa ME (2011) Characterization of radial bending properties of cork. Eur J Wood Prod 69(4):557–563CrossRefGoogle Scholar
  2. ASTM D5930–09 (2014) Standard test method for thermal conductivity of plastic by means of a transient line-source technique. American Society for Testing and Materials Standards. West ConshohockenGoogle Scholar
  3. Baptista I, Miranda I, Quilhó T, Gominho J, Pereira H (2013) Characterisation and fractioning of Tectona grandis bark in view of its valorisation as a biorefinery raw-material. Ind Crop Prod 50:166–175CrossRefGoogle Scholar
  4. Blanchet P, Cloutier A, Riedl B (2000) Particleboard made from hammer milled black spruce bark residues. Wood Sci Technol 34:11–19CrossRefGoogle Scholar
  5. Cardoso S, Ferreira J, Quilhó T, Pereira H (2017) Cork of douglas-fir bark: impact of structural and anatomical features on usage. Ind Crop Prod 99:135–141CrossRefGoogle Scholar
  6. Carvalho LM, Costa CA (1998) Modeling and simulation of the hot-pressing process in the production of medium density fiberboard. Chem Eng Commun 170(1):1–21CrossRefGoogle Scholar
  7. Choi SJ, Park SH, Jeon JK, Lee IG, Ryu C, Suh DJ, Park YK (2013) Catalytic conversion of particle board over microporous catalysts. Renew Energy 54:105–110CrossRefGoogle Scholar
  8. European Standards EN 310 (1993) Wood based panels-determination of modulus of elasticity in bending strength. European Committee for Standardization. Rue de la Science 23 B-1040 Brussels, BelgiumGoogle Scholar
  9. European Standards EN 317 (1993) Particleboards and fibreboards-determination of swelling in thickness after immersion in water. European Committee for Standardization. Rue de la Science 23 B-1040 Brussels, BelgiumGoogle Scholar
  10. European Standards EN 319 (1993) Particleboards-determination of tensile strength perpendicular to the plane of the board. European Committee for Standardization. Rue de la Science 23 B-1040 Brussels, BelgiumGoogle Scholar
  11. European Standards EN 312 (2010) Particleboard specifications. European Committee for Standardization. Rue de la Science 23 B-1040 Brussels, BelgiumGoogle Scholar
  12. Ferreira JP, Quilhó T, Pereira H (2016a) Characterization of Betula pendula outer bark regarding cork and phloem components at chemical and structural levels in view of biorefinery integration. J Wood Chem Technol 37:1–16Google Scholar
  13. Ferreira J, Miranda I, Sen U, Pereira H (2016b) Chemical and cellular features of virgin and reproduction cork from Quercus variabilis. Ind Crop Prod 94:638–648CrossRefGoogle Scholar
  14. Ferreira J, Miranda I, Gominho J, Pereira H (2016c) Chemical characterization of cork and phloem from Douglas fir outer bark. Holzforschung 70(5):475–483CrossRefGoogle Scholar
  15. Gil L (1994) Effect of hot pressing densification on the cellular structure of black agglomerated cork board. Holz Roh Werkst 52:131–134CrossRefGoogle Scholar
  16. Gil L (2009) Cork composites: a review. Materials 2(3):776–789CrossRefPubMedCentralGoogle Scholar
  17. Gil L (2012) Cortiça, Ciência e Engenharia de Materiais de Construção (Science and Engineering of Construction Materials) (In Portuguese). In: Clara M, Gonçalves Fernanda, Margarido (eds). Ist Press, LisbonGoogle Scholar
  18. Günther B, Gebauer K, Barkowski R, Rosenthal M, Bues CT (2012) Calorific value of selected wood species and wood products. Eur J Wood Prod 70(5):755–757CrossRefGoogle Scholar
  19. Halligan AF (1970) A review of thickness swelling in particleboard. Wood Sci Technol 4:301–312CrossRefGoogle Scholar
  20. Harkin JM, Rowe JW (1971) Bark and its possible uses, USDA Forest Service Research Note FPL-091. http://www.fpl.fs.fed.us/documnts/fplrn/fplrn091.pdfS. Accessed 7 Apr 2017
  21. Heo HS, Park HJ, Park YK, Ryu C, Suh DJ, Suh YW, Yim JH, Kim SS (2010) Bio-oil production from fast pyrolysis of waste furniture sawdust in a fluidized bed. Bioresour Technol 101:S91-S96CrossRefGoogle Scholar
  22. Isomet 2114 (2011) Thermal properties analyzer, User’s Guide Version 120712. Applied Precision Ltd, BratislavaGoogle Scholar
  23. Kain G, Barbu MC, Teischinger A, Musso M, Petutschnigg A (2012) Substantial bark use as insulation material. For Prod J 62(6):480–487Google Scholar
  24. Kain G, Barbu MC, Hinterreiter S, Richter K, Petutschnigg A (2013) Using bark as a heat insulation material. BioResources 8(3):3718–3731CrossRefGoogle Scholar
  25. Kain G, Güttler V, Barbu MC, Petutschnigg A, Richter K, Tondi G (2014) Density related properties of bark insulation boards bonded with tannin hexamine resin. Eur J Wood Prod 72(4):417–424CrossRefGoogle Scholar
  26. Kain G, Lienbacher B, Barbu MC, Plank B, Richter K, Petutschnigg A (2016) Evaluation of relationships between particle orientation and thermal conductivity in bark insulation board by means of CT and discrete modeling. Case Stud Nondestruct Test Eval 6:21–29CrossRefGoogle Scholar
  27. Kelly W (1977) Critical literature review of relationships between processing parameters and physical properties of particleboard. Gen. Tech. Rep. FPL-10. U.S. Department of Agriculture, Forest Service, Forest Products Laboratory Madison Wisconsin, MadisonGoogle Scholar
  28. Knapic S, Oliveira V, Machado JS, Pereira H (2016) Cork as a building material, a review. Eur J Wood Prod 74:775–791CrossRefGoogle Scholar
  29. Lakreb N, Bezzazi B, Pereira H (2015) Mechanical behavior of multilayered sandwich panels of wood veneer and a core of cork agglomerates. Mater Des 65:627–636CrossRefGoogle Scholar
  30. Leite C, Pereira H (2017) Cork-containing barks—a review. Front Mater 3:1–19CrossRefGoogle Scholar
  31. Miranda I, Gominho J, Mirra I, Pereira H (2013) Fractioning and chemical characterization of barks of Betula pendula and Eucalyptus globulus. Ind Crop Prod 41:299–305CrossRefGoogle Scholar
  32. Mota GS, Sartori CJ, Ferreira J, Miranda I, Quilhó T, Mori FA, Pereira H (2016) Cellular structure and chemical composition of cork from Plathymenia reticulata occurring in the Brazilian Cerrado. Ind Crop Prod 90:65–75CrossRefGoogle Scholar
  33. Olivella MA, Jové P, Şen A, Pereira H, Villaescusa I, Fiol N (2011) Sorption performance of Quercus cerris cork with polycyclic aromatic hydrocarbons and toxicity testing. BioResources 6(3):3363–3375Google Scholar
  34. Ortuño TG, Rodríguez JA, García MTF, García MFV, García CEF (2011) Evaluation of the physical and mechanical properties of particleboard made from giant reed (Arundodonax L.). BioResources 6:477–486Google Scholar
  35. Pásztory Z, Mohácsiné IZ, Gorbacheva G, Börcsök Z (2016) The utilization of tree bark. BioResources 11:7859–7888CrossRefGoogle Scholar
  36. Pásztory Z, Mohácsiné IR, Börcsök Z (2017) Investigation of thermal insulation panels made of black locust tree bark. Constr Build Mater 147:733–735CrossRefGoogle Scholar
  37. Pereira H (2007) Cork: biology, production and uses. Elsevier, AmsterdamGoogle Scholar
  38. Pereira H (2012) The importance of biomass structure and chemical composition for biorefineries. In: 2012 IUFRO Conference. Lisbon, PortugalGoogle Scholar
  39. Pereira H (2015) The rationale behind cork properties: a review of structure and chemistry. BioResources 10:6207–6229CrossRefGoogle Scholar
  40. Rios PDA (2007) Caracterização tecnológica e produção de painéis de cortiça de Kielmeyera coriacea Mart (pau-santo) (Technological characterization and production of cork panels from cork of Kielmeyera coriacea Mart (pau-santo)) (In Portuguese). M.Sc. Dissertation, Lavras UniversityGoogle Scholar
  41. Rowell RM, Imamura Y, Kawai S, Norimoto M (2007) Dimensional stability, decay resistance, and mechanical properties of veneer-faced low-density particleboards made from acetylated wood. Wood Fiber Sci 21(1):67–79Google Scholar
  42. Şen A, Pereira H (2015) Evaluation of cork as a natural sorbent for oil spill treatments. In WASTES 2015–solutions, treatments and opportunities: selected papers from the 3rd edition of the international conference on wastes: solutions, treatments and opportunities. Viana Do Castelo, Portugal. CRC Press, United StatesGoogle Scholar
  43. Şen A, Miranda I, Santos S, Graça J, Pereira H (2010) The chemical composition of cork and phloem in the rhytidome of Quercus cerris bark. Ind Crop Prod 31:417–422CrossRefGoogle Scholar
  44. Şen A, Quilhó T, Pereira H (2011a) Bark anatomy of Quercus cerris L. var. cerris from Turkey. Turk J Bot 35:45–55Google Scholar
  45. Şen A, Quilhó T, Pereira H (2011b) The cellular structure of cork from Quercus cerris var cerris bark in a material’s perspective. Ind Crop Prod 34:929–936CrossRefGoogle Scholar
  46. Şen AU, Olivella A, Fiol N, Miranda I, Villaescusa I, Pereira H (2012a) Removal of chromium (VI) in aqueous environments using cork and heat-treated cork samples from Quercus cerris and Quercus suber. BioReources 7(4):4843–4857Google Scholar
  47. Şen A, Miranda I, Pereira H (2012b) Temperature-induced structural and chemical changes in cork from Quercus cerris. Ind Crop Prod 37(1):508–513CrossRefGoogle Scholar
  48. Şen A, Van den Bulcke J, Defoirdt N, Van Acker J, Pereira H (2014) Thermal behaviour of cork and cork components. Thermochim Acta 582:94–100CrossRefGoogle Scholar
  49. Şen A, Pereira H, Olivella MA, Villaescusa I (2015a) Heavy metals removal in aqueous environments using bark as a biosorbent. Int J Environ Sci Technol 12:391–404CrossRefGoogle Scholar
  50. Şen A, de Melo MM, Silvestre AJ, Pereira H, Silva CM (2015b) Prospective pathway for a green and enhanced friedelin production through supercritical fluid extraction of Quercus cerris cork. J Supercrit Fluid 97:247–255CrossRefGoogle Scholar
  51. Şen A, Leite C, Lima L, Lopes P, Pereira H (2016) Industrial valorization of Quercus cerris bark: Pilot scale fractionation. Ind Crop Prod 92:42–49CrossRefGoogle Scholar
  52. Villeneuve E (2004) Utilisation de l´ecorce du peuplier faux-tremble pour la fabrication des panneaux de particules (Utilization of the bark of trembling aspen for the production of particleboards) (In French). M.Sc Dissertation, Laval UniversityGoogle Scholar
  53. Wellons JD, Krahmer RL (1973) Self bonding in bark composites. Wood Sci 6:112–122Google Scholar
  54. Wisherd KD, Wilson JB (1979) Bark as a supplement to wood furnish for particleboard. Forest Prod J 29(2):35–39Google Scholar
  55. Yang H, Yan R, Chen H, Lee DH, Zheng C (2007) Characteristics of hemicellulose, cellulose and lignin pyrolysis. Fuel 86(12–13):1781–1788CrossRefGoogle Scholar
  56. Yemele MCN, Blanchet P, Cloutier A, Koubaa A (2008) Effects of bark content and particle geometry on the physical and mechanical properties of particleboard made from black spruce and trembling aspen bark. For Prod J 58:48–56Google Scholar

Copyright information

© Springer-Verlag GmbH Germany, part of Springer Nature 2018

Authors and Affiliations

  1. 1.Research Unit Materials, Processes and EnvironmentUniversity M’Hamed BougaraBoumerdesAlgeria
  2. 2.Departement of Materials SciencesUniversity of Science and Technology Houari BoumedieneBab EzzouarAlgeria
  3. 3.Department of Wood MechanicsIstanbul UniversityIstanbulTurkey
  4. 4.Centro de Estudos Florestais, Instituto Superior de AgronomiaUniversidade de LisboaLisbonPortugal
  5. 5.Department of Civil Engineering, Architecture and Georesources, Instituto Superior TécnicoCERIS, Universidade de LisboaLisbonPortugal

Personalised recommendations