Advertisement

Finite Element Analysis of Ti-6Al-4V ELI and Alumina Bio-inert Material Used in Molar Tooth Dental Implant Applications

  • V. Sharanraj
  • C. M. Ramesha
High-Performance Ceramics
  • 2 Downloads

Abstract

TI-6AL-4V ELI and alumina are important bio-inert materials used in the field of dental implants due to their unique characteristics of minimal interaction with surrounding tissue. This paper presents the typical finite element method (FEM) as an effective approach for the analysis of dental implants and dental structures. In the present work, three-dimensional modeling of a molar tooth was generated by CATIA V5 software. Analyses were carried out by commercial FEA software Ansys 14.5 to evaluate the displacement, strain, stress, fatigue life, and factor of safety in the proximal region of Ti-6Al-4V ELI and alumina molar teeth implants under a static load condition of 50, 100, 150, 200, 250, and 300 N. The results show that the displacement, strain and stresses, fatigue life, and factor of safety were within the admissible material limits for alumina. Hence, the study reveals that alumina is an alternate biomaterial suitable for dental implants.

Keywords

bio-inert material Ti-6Al-4V ELI alumina dental implant FEM 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. [1]
    Ahmad Jumah, A., Beekmans, M.N., Wood, J.D.: Zirconia Implants: The new arrival in the armoury of successful aesthetic implant dentistry. Smile dental J. 2 (2012) 12–24Google Scholar
  2. [2]
    Motta, B.A., Pereira, C.L., Andreia, R.C.: Finite Element Analysis in 2D and 3D models for sound and restored teeth. ASM Handbook 10 (2006) 329–339Google Scholar
  3. [3]
    Hattab, F.N., Al-Momani, A.S., Yassin, O.M., Al-Omari M.A.O., Hamasa, A.H., Rawashdeh, N.A., Tavas A.: Crown diameters of deciduous teeth in Jordanians. Dental Anthropology. 13 (1999) 1–9Google Scholar
  4. [4]
    Colvin, G.N., London, B.: Titanium alloys, cast. Advances in titanium alloy casting technology. ASM Handbook 44 (2010) 2868–2874Google Scholar
  5. [5]
    Zaffe, D., Bertoldi, C., Consolo, U.: Element release from titanium devices used in oral and maxillofacial surgery. Biomaterials 24 (2003) 1093–1099CrossRefGoogle Scholar
  6. [6]
    Barnes, D.H., Moavenian, A., Sharma, A., Best, S.M.: Biocompatibility of ceramics. Materials for medical devices. ASM Handbook 23 (2012) 128–129Google Scholar
  7. [7]
    Kohal, R.J., Andreiotelli, M.: Fracture strength of zirconia implants after artificial aging. Clinical Implant. Dent. 1 (2009) 158–166Google Scholar
  8. [8]
    Kant, R., Shrikrishna Joshi, N., Uday Dixit, S.: An integrated FEM-ANN model for laser bending process with inverse estimation of absorptivity. Mech. Adv. Mater. Modern Proc. 1 (2015) 8–15Google Scholar
  9. [9]
    Jie Yang, Hong Jun Xiang: A three-dimensional finite element study on the biomechanical behavior of an FGBM dental implant in surrounding bone. J. Biomechanics 40 (2007) 2377–2385CrossRefGoogle Scholar
  10. [10]
    Bathe, K.J.: Finite element procedures. Prentice Hall of India Pvt. Ltd., New Delhi, India, (1996) 25Google Scholar
  11. [11]
    Dattatraya Parle, Anirudha Ambulgeka, Ketan Gaikwad: 3D modeling and stress analysis of premolar tooth using FEA. Proc. Infosys High Trend Conference, India (2012) 88Google Scholar
  12. [12]
    Freudenberg, B., Akiyoshi Osaka: Aluminum oxide — biomedical applications. Materials for medical devices. ASM Handbook 23 (2012) 267–269Google Scholar
  13. [13]
    Chiung Fang Wang, Heng Li Huang, Dan Jae Lin, Yen Wen Shen, Lih Jyh Fuh, Jui Ting Hsu: Comparisions of maximum deformation and failure forces at the implant abutment interface of titanium implants between titanium alloy and zirconia abutments with two levels of marginal bone loss. BioMedical Engineering OnLine. 12 (2013) 45CrossRefGoogle Scholar
  14. [14]
    Teoh, S.H.: Fatigue of biomaterials: A review, Int. J. Fatigue 22 (2000) 825–837CrossRefGoogle Scholar

Copyright information

© Springer Fachmedien Wiesbaden GmbH, part of Springer Nature 2017

Authors and Affiliations

  1. 1.MSRITVisvesvaraya Technological UniversityBengaluruIndia

Personalised recommendations