Advertisement

Interceram - International Ceramic Review

, Volume 65, Issue 7, pp 24–27 | Cite as

Low-Temperature Catalytic Graphitization of Phenolic Resin Using a Co-Ni Bimetallic Catalyst

  • J. Wang
  • X. Deng
  • H. Zhang
  • H. Duan
  • F. Cheng
  • S. Zhang
Review Papers

Abstract

Using a Co-Ni bimetallic catalyst we investigated the catalytic graphitization of phenolic resin at 400, 600, 800, and 1000°C under an Ar atmosphere. The structure and morphology of the pyrolyzed resin were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The results show that the optimum catalytic graphitization temperature of phenolic resin is 800°C, both carbon nanotubes and carbon onions are formed in the final products.

Keywords

catalytic graphitization Co-Ni bimetal catalyst phenolic resin 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. [1]
    Makarevich, N.I., Sushko, N.I., Ivanov, A.I., Lingart, E.N., Glazova, T.I., Prutkov, L.M.: Pyrolysis of some commercial phenol-formaldehyde bonding agents. Journal of Applied Spectroscopy 26 (1977) [4] 531–535CrossRefGoogle Scholar
  2. [2]
    Trick, K.A., Saliba, T.E.: Mechanisms of the pyrolysis of phenolic resin in a carbon/phenolic composite. Carbon 33(1995) [11] 1509–1515CrossRefGoogle Scholar
  3. [3]
    Wang, J.G., Guo, Q.G., Liu, L., Song, J.R.: Study on the microstructural evolution of high temperature adhesives for graphite bonding. Carbon 40 (2002) [13] 2447–2452CrossRefGoogle Scholar
  4. [4]
    Bafekrpour, E., Simon, G.P., Habsuda, J., Naebe, M., Yang, C., Fox, B.: Fabrication and characterization of functionally graded synthetic graphite/phenolic nanocomposites. Materials Science and Engineering A545 (2012) 123–131CrossRefGoogle Scholar
  5. [5]
    Luo, M., Li, Y., Sang, S., Zhao, L., Jin, S., Li, Y.: In situ formation of carbon nanotubes and ceramic whiskers in Al2O3-C refractories with addition of Ni-catalyzed phenolic resin. Materials Science and Engineering A 558 (2012) 533–542CrossRefGoogle Scholar
  6. [6]
    Jiang, H., Wang, J., Wu, S., Wang, B., Wang, Z.: Pyrolysis kinetics of phenol-formaldehyde resin by non-isothermal thermogravimetry. Carbon 48 (2010) [2] 352–358CrossRefGoogle Scholar
  7. [7]
    Inagaki, M., Fujita, K., Takeuchi, Y., Oshida, K., Iwata, H., Konno, H.: Formation of graphite crystals at 1000–1200°C from mixtures of vinyl polymers with metal oxides. Carbon 39 (2001) [6] 921–929CrossRefGoogle Scholar
  8. [8]
    Ramakrishnan, S., Jelmy, E.J., Dhakshnamoorthy, M., Rangarajan, M., Kothurkar, N.: Synthesis of carbon nanotubes from ethanol using RF-CCVD and Fe-Mo catalyst. Synthesis and Reactivity in Inorganic Metal-Organic and Nano-Metal Chemistry 44 (2014), 44 [6] 873–876CrossRefGoogle Scholar
  9. [9]
    Tian, Y., Hu, Z., Yang, Y., Chen, X., Ji, W., Chen, Y.: Thermal analysis — mass spectroscopy coupling as a powerful technique to study the growth of carbon nanotubes from benzene. Chemical Physics Letters 388 (2004) [4–6] 259–262CrossRefGoogle Scholar
  10. [10]
    Li, Y., Li, X.K., Liu, L.: The production of CNTs by catalytic decomposition of different source gases. New Carbon Materials 19 (2004) [4] 298–302Google Scholar
  11. [11]
    Shaikjee, A., Coville, N.J.: The role of the hydrocarbon source on the growth of carbon materials. Carbon 50 (2012) [10] 3376–3398CrossRefGoogle Scholar
  12. [12]
    Simate, G.S., Iyuke, S.E., Ndlovu, S., Yah, C.S., Walubita, L.F.: The production of carbon nanotubes from carbon dioxide: challenges and opportunities. Journal of Natural Gas Chemistry 19 (2010) [5] 453–460CrossRefGoogle Scholar
  13. [13]
    Stamatin, I., Morozan, A., Dumitru, A., Ciupina, V., Prodan, G., Niewolski, J. et al.: The synthesis of multi-walled carbon nanotubes (MWNTs) by catalytic pyrolysis of the phenol-formaldehyde resins. Physica E: Low-dimensional Systems and Nanostructures 37 (2007) [1–2] 44–48CrossRefGoogle Scholar
  14. [14]
    Quan, C., Li, A., Gao, N.: Synthesis of carbon nanotubes and porous carbons from printed circuit board waste pyrolysis oil. Journal of Hazardous Materials 179 (2010) [1–3] 911–917CrossRefGoogle Scholar
  15. [15]
    Skowroński, J.M., Knofczyński, K., Inagaki, M.: Changes in electrochemical insertion of lithium into glass-like carbon affected by catalytic graphitization at 1000°C. Solid State Ionics 178 (2007) [1–2] 137–144CrossRefGoogle Scholar
  16. [16]
    Xu, S., Zhang, F., Kang, Q., Liu, S., Cai, Q.: The effect of magnetic field on the catalytic graphitization of phenolic resin in the presence of Fe-Ni. Carbon 47 (200) [14] 3233–3237CrossRefGoogle Scholar
  17. [17]
    Jin, Y., Wang, G., Li, Y.: Catalytic growth of high quality single-walled carbon nanotubes over a Fe/MgO catalyst derived from a precursor containing Feitknecht compound. Applied Catalysis A General 445–446 (2012) 121–127CrossRefGoogle Scholar
  18. [18]
    Zhao, M., Song, H., Chen, X., Lian, W.: Large-scale synthesis of onion-like carbon nanoparticles by carbonization of phenolic resin. Acta Materialia 55 (2007) [18] 6144–6150CrossRefGoogle Scholar
  19. [19]
    Yan, Y., Yang, H., Zhang, F., Tu, B., Zhao, D.: Low-temperature solution synthesis of carbon nanoparticles, onions and nanoropes by the assembly of aromatic molecules. Carbon 45 (2007) [11] 2209–2216CrossRefGoogle Scholar

Copyright information

© Springer Fachmedien Wiesbaden 2016

Authors and Affiliations

  1. 1.The State Key Laboratory of Refractories and MetallurgyWuhan University of Science and TechnologyWuhanChina
  2. 2.College of Engineering, Mathematics and Physical SciencesUniversity of ExeterExeterUK

Personalised recommendations