Advertisement

Interceram - International Ceramic Review

, Volume 64, Issue 6–7, pp 287–290 | Cite as

Characterization Using XPS and XRD of Ti(C,N) Coating Properties for Cutting Tool Applications

  • P. C. Siow
  • J. A. Ghani
  • R. J. Talib
  • M. J. Ghazali
  • C. H. Che Haron
High-Performance Ceramics

Abstract

The properties of titanium carbonitride (TiCN) are a result of its composition, which can be adjusted by controlling the material’s C-N ratio to a precise level. An experimental study was conducted to vary the composition and properties of TiCN. The substrate used for cathodic arc physical vapour deposition (CAPVD) was tungsten carbide (WC-6Co), which was prepared in-house by a powder metallurgy process. Pure titanium (Ti) was used as a cathode and source of Ti. Methane (CH4) and nitrogen (N2) gases were used as sources of C and N to form the Ti(C,N) coating applied in the CAPVD process. Tests showed that the composition and properties of Ti(C,N) were successfully varied by controlling the CH4-N2 ratio. The surface microhardness of coated carbide samples improved and the coefficient of friction declined as the carbon content incorporated within the Ti(C,N) coating increased.

Keywords

TiCN coating cathodic arc physical vapour deposition (CAPVD) XRD XPS cutting tool 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. [1]
    North, B.: Six issues for the hard coatings community. Surf. Coat. Technol. 106 (1998) [2–3] 129–134CrossRefGoogle Scholar
  2. [2]
    Destefani, J.: Cutting tools 101. Manuf. Eng. 129 (2002) [3] 1–18Google Scholar
  3. [3]
    Cselle, T., Barimani, A.: Today’s applications and future developments of coatings for drills and rotating cutting tools. Surf. Coat. Technol. 76–77 (1995) [2] 712–718CrossRefGoogle Scholar
  4. [4]
    Yao, S.H., Kao, W.H., Su, Y.L., Liu, T.H.: Effect of periods on wear performance of TiN/AlN superlattice films. Mater. Sci. Eng: A. 392 (2005) [1–2] 380–385CrossRefGoogle Scholar
  5. [5]
    Navinšek, B., Panjan, P., Milošev, I.: Industrial applications of CrN (PVD) coatings, deposited at high and low temperatures. Surf. Coat. Technol. 97 (1997) [1–3] 182–191CrossRefGoogle Scholar
  6. [6]
    Kalpakjian, S., Schmid, S.R.: Manufacturing Processes for Engineering Materials, 5th edition. Pearson Education (2008)Google Scholar
  7. [7]
    Jindal, P.C., Santhanam, A.T., Schleinkofer, U., Shuster, A.F.: Performance of PVD TiN, TiCN, and TiAlN coated cemented carbide tools in turning. Int. J. Refract. Met. Hard Mater. 17 (1999) [1–3] 163–170CrossRefGoogle Scholar
  8. [8]
    Narasimhan, K., Boppana, S.P., Bhat, D.G.: Development of a graded TiCN coating for cemented carbide cutting tools — a design approach. Wear 188 (1995) [1–2] 123–129CrossRefGoogle Scholar
  9. [9]
    Agrawal, S., Chakrabarti, A.K., Chattopadhyay, A.B.: A study of the machining of cast austenitic stainless-steels with carbide tools. J. Mater. Process. Technol. 52 (1995) [2–4] 610–620CrossRefGoogle Scholar
  10. [10]
    Cheng, Y.H., Browne, T., Heckerman, B.: Influence of CH4 fraction on the composition, structure, and internal stress of the TiCN coatings deposited by LAFAD technique. Vacuum 85 (2010) [1] 89–94CrossRefGoogle Scholar
  11. [11]
    Yang, Y., Yao, W., Zhang, H.: Phase constituents and mechanical properties of laser in-situ synthesized TiCN/TiN composite coating on Ti-6Al-4V. Surf. Coat. Technol. 205 (2010) [2] 620–624CrossRefGoogle Scholar
  12. [12]
    Bemporad, E., Pecchio, C., De Rossi, S., Carassiti, F.: Characterization and hardness modelling of alternate TiN/TiCN multilayer cathodic arc PVD coating on tool steel. Surf. Coat. Technol. 146–147 (2001) 363–370CrossRefGoogle Scholar
  13. [13]
    Yang, Y.L., Zhang, D., Kou, H.S., Liu, C.S.: Laser Cladded TiCN Coatings on the Surface of Titanium. Acta Metall. Sin. (Engl. Lett.). 20 (2007) [3] 210–216CrossRefGoogle Scholar
  14. [14]
    Aslan, E.: Experimental investigation of cutting tool performance in high speed cutting of hardened X210 Cr12 cold-work tool steel (62 HRC). Materials and Design 26 (2005) [1] 21–27CrossRefGoogle Scholar
  15. [15]
    Tsao, C.-C., Hong, H.: Comparison of the tool life of tungsten carbides coated by multilayer TiCN and TiAlCN for end mills using the Taguchi method. J. Mater. Process. Technol. 123 (2002) [1] 1–4CrossRefGoogle Scholar
  16. [16]
    Selamat, M.A., Manaf, S.A., Diah, N.M., Jaafar, T.R.: Powder metallurgy processing of hardmetal powder. Solid State Sci. Technol. 18 (2010) [1] 194–201Google Scholar
  17. [17]
    Talib, R.J., Abdullah, M.Z., Hashim, A.H., Toff, M.R.M.: Development of TiN coatings using cathodic arc physical vapour deposition technique: A preliminary result. J. Solid State Sci. Technol. Lett. 13 (2006) [1] 76–83Google Scholar
  18. [18]
    Suresha, S.J., Bhide, R., Jayaram, V., Biswas, S.K.: Processing, microstructure and hardness of TiN/(Ti, Al)N multilayer coatings. Mater. Sci. Eng: A. 429 (2006) [1–2] 252–260CrossRefGoogle Scholar
  19. [19]
    Randhawa, H.: Cathodic arc plasma deposition of TiC and TiCxN1−x films. Thin Solid Films 153 (1987) [1–3] 209–218CrossRefGoogle Scholar
  20. [20]
    National Institute of Standards and Technology, U.S.A.: XPS Database: http://srdata.nist.gov/xps/Default.aspx (2013)
  21. [21]
    Cheng, Y.H., Browne, T., Heckerman, B., Meletis, E.I.: Influence of the C content on the mechanical and tribological properties of the TiCN coatings deposited by LAFAD technique. Surf. Coat. Technol. 205 (2011) [16] 4024–4029CrossRefGoogle Scholar

Copyright information

© Springer Fachmedien Wiesbaden 2015

Authors and Affiliations

  • P. C. Siow
    • 1
  • J. A. Ghani
    • 1
  • R. J. Talib
    • 2
    • 3
  • M. J. Ghazali
    • 1
  • C. H. Che Haron
    • 1
  1. 1.Department of Mechanical and Materials Engineering Faculty of Engineering and Built EnvironmentUniversiti Kebangsaan MalaysiaBangi, SelangorMalaysia
  2. 2.Advanced Materials Research Centre SIRIM BerhadKulim, KedahMalaysia
  3. 3.Fakulti Kejuruteraan MekanikalUniversiti Teknologi MARAPermatang Pauh, Pulau PinangMalaysia

Personalised recommendations