Advertisement

Interceram - International Ceramic Review

, Volume 64, Issue 3, pp 119–121 | Cite as

Effects of Added Al Powder on the Properties of Sialon-ZrN Composites Fabricated by Aluminothermic Reduction and Nitridation

  • Shujing Li
  • Nana Xu
  • Binwen Duan
  • Yuanbing Li
Special Technologies

Abstract

Sialon-ZrN composites were synthesized from zircon and aluminium via an aluminothermic reduction and nitridation process. The effects of extra Al powder on the product phase compositions and morphologies were studied. Products with different phases and morphologies result from different surplus amounts of additional Al. With increases of Al, after firing at 1500°C, the amount of ZrSiO4 decreased and the amount of sialon increased. The phase evolution of the specimens indicated that 8 mol-% extra Al powder contributed to the best decomposition of zircon and led to improved formation of sialon-ZrN composites.

Keywords

sialon-ZrN composite phase transitions aluminothermic reaction microstructures 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. [1]
    Rouquié, Y., Jones, M.I.: Influence of additives and compositions on the nitridation and formation of SiAlONs produced by reaction bonding and silicothermal reduction. J. Asian Ceram. Soc. 1 (2013) 53–64CrossRefGoogle Scholar
  2. [2]
    Ma, B.Y., Li, Y., Yan, C., Ding, Y.S.: Effects of synthesis temperature and raw materials composition on preparation of β-Sialon based composites from fly ash. Trans. Nonferrous Met. Soc. of China 22 (2012) 129–133CrossRefGoogle Scholar
  3. [3]
    Huang, J.T., Liu, Y.G., Fang, M.H., Huang, Z.H.: Synthesis and characterization of single-crystalline phase Li-α-Sialon. Ceram. Inter. 38 (2012) 3391–3395CrossRefGoogle Scholar
  4. [4]
    Huang, J.T., Huang, Z.H., Liu, Y.G.: Preparation and blast furnace slag corrosion behavior of SiC-Sialon-ZrN free-fired refractories. Ceram. Inter. 40 (2014) 9763–9773CrossRefGoogle Scholar
  5. [5]
    Li Yin, Youguo Xu, Zhaohui Huang: Synthesis of ZrN-sialon composites from zircon and alumina by carbothermal reduction-nitridation. Powder Technol. 246 (2013) 677–681CrossRefGoogle Scholar
  6. [6]
    Deng, J.X., Liu, J.H., Zhao, J.L.: Wear mechanisms of PVD ZrN coated tools in machining, Int. J. Refr. Metals and Hard Mater. 26 (2008) 164–172CrossRefGoogle Scholar
  7. [7]
    Li, C.L., La, P.Q., Liu, H.: Effect of Si element on microstructure and mechanical properties of bulk nanocrystalline Fe-Al-Cr, Fe-Al-Mn materials prepared by aluminothermic reaction. Mater. Sci. and Eng. of Powder Metallurgy 16 (2011) [6] 893–899Google Scholar
  8. [8]
    Ma, B.Y., Sun, M.G., Ding, Y.S.: Fabrication of β-Sialon/ZrN/ZrON composites using fly ash and zircon. Trans. Nonferrous Met. Soc. of China 23 (2013) 2638–2643CrossRefGoogle Scholar
  9. [9]
    Ma, B.Y., Yu, J.K.: Preparation of ZrN-Si3N4 composite powder with zircon and carbon black as raw materials. Trans. Nonferrous Met. Soc. of China 19 (2009) 1222–1226CrossRefGoogle Scholar
  10. [10]
    Li, Y.T., Huang, Z.H, Xu, Y.G.: Synthesis of ZrN-sialon composites from zircon and alumina by carbothermal reduction-nitridation. Mater. Res. Bull. 47 (2012) 3273–3276CrossRefGoogle Scholar
  11. [11]
    Li, Y.W., Zhou, G.H., Jin, S.L., Li, N.: Formation mechanism of 21R AlN-polytypoids in aluminothermic reduction and nitridation process. J. Mater. Sci. 41 (2006) 4795–4798CrossRefGoogle Scholar

Copyright information

© Springer Fachmedien Wiesbaden 2015

Authors and Affiliations

  1. 1.The State Key Lab. of Refractories and Metallurgy, Department of Materials Science and EngineeringWuhan University of Science and TechnologyWuhanChina
  2. 2.Sinosteel Luoyang Inst. of Refractories Research Co., Ltd.LuoyangChina

Personalised recommendations