Advertisement

JOM

, Volume 30, Issue 4, pp 36–43 | Cite as

Pyrometallurgy

  • P. J. Mackey
  • G. C. Balfour
Annual Review: Metallurgical Processes
  • 40 Downloads

Keywords

Electric Furnace Oxygen Enrichment Copper Slag Flash Smelt Flash Furnace 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    Zimmerman, J., Copper Industry in Search of a Cure, Address to the Non-Ferrous Metals Division, Bureau International de la Recuperation(BIR), Geneva, Switzerland Nov. 9, 1977.Google Scholar
  2. 2.
    Prain, R. L., Copper: An objective Review of the World Situation, Paper presented to the Joint Conference of Polish Academy of Sciences, Non-Ferrous Metals Institute (Gliwice) and Metals Society (London), Zakopane, Poland. October 17, 1977.Google Scholar
  3. 3.
    Amsden, M. P., Sweetin, R. M., Treilhard, D. G., The Selection and Design of Texasgulf Canada’s Copper Smelte and Refinery, Paper presented at the 106th AIME Annual Meeting, Atlanta, Georgia, 6-10 March, 1977.Google Scholar
  4. 4.
    Argali, G. O., La Caridad—World’s Largest new Open Pi Copper Mine, World Mining, 1977, Vol. 30, No. 12, pp. 42–46.Google Scholar
  5. 5.
    Anonymous, Poland’s Metal Industries Centre on Coppe and Steel—and Look to the West for Plant, Metals and Materials, 1977, October 1977, pp. 44–46.Google Scholar
  6. 6.
    Juusela, J., and Makinen, J., Advanced Smelting of Copper Concentrates by the Outokumpu Flash Smelting Method, Paper No. M2, The Second International Symposium, Management of Copper Resources, Ore Processing Section, Metallurgy and Environment Protection Section, Lubin, Poland, 27–28 April, 1977.Google Scholar
  7. 7.
    Aaltonen, O. A., Andersson, B. T., Juusela, J. T., Palperi M. J., Tuominen, T. K., Process for Producing Raw Copper Continuously in One Stage from Unrefined Sulphidic Copper Concentrate or Ore, U.S. Patent 4,030,915, June 21, 1977Google Scholar
  8. 8.
    Zmudzinski, K., and Madej, W., Trends in Development of Ore Processing Technology in LGOM/LGCB (Lubin Glogovs Copper Basin), Ref. (6), Paper No. P1.Google Scholar
  9. 9.
    Sobierajski, S., Smieszek, Zb., Sosin, J., and Czarnecki, J., New Technology for Polish Copper Concentrates Smelting in the Fluidized-Bed Oven, Ref. (6), Paper No. M4.Google Scholar
  10. 10.
    Hallett G. D., and Tarassoff, P., Copper Smelting by the Noranda Process, Ref. (6), Paper No. M5.Google Scholar
  11. 11.
    Petersson, S., Norro, A., and Eriksson, S., Treatment of Copper Converter Slags in Top Blowing Rotary Converter, Extractive Metallurgy of Copper, Vol. I, ed. J. C. Yannopoulos and J. C. Agarwal, The A.I.M.E., New York, 1976, pp. 317–330.Google Scholar
  12. 12.
    Petersson, S., Norrö, A., and Eriksson, S., Treatment of Lead-Zinc containing Dust in a TBRC, Paper presented at the 106th AIME Meeting, Atlanta, 6–10 March 1977, AIME-TMS Paper No. A77-12.Google Scholar
  13. 13.
    Petersson, S., and Aktiebolag, B., Autogenous Smelting o Lead Concentrate in TBRC, Paper presented at the 106th AIME Annual Meeting, Atlanta, 6-10 March 1977, AIME-TMS Paper No. A77-11.Google Scholar
  14. 14.
    Petersson, S., Eriksson, S., and Fridfeldt, C., Treatment of Complex Copper Concentrates in TBRC, Paper presented a the 16th Annual Conference of Metallurgists, Vancouver, 22-25 August, 1977.Google Scholar
  15. 15.
    Donaldson, J. W., Sharma, S. N., and Themelis, N.J., Pyrometallurgical Recovery of Copper from Slag Material, U.S. Patent, 4,032,327, June 28, 1977.Google Scholar
  16. 16.
    Anderson, J. M., and Robertson, J. M., Environmental Considerations at Afton Mines Ltd. (N.P.L.), Kamloops, B.C., Paper presented to the CIMM Annual Meeting, Ottawa, April 1977.Google Scholar
  17. 17.
    Morris, C. W., and Walden, S. J., The Development of the Kaldo Furnace Smelting Technique and its Application for Top Blown Rotary Converter (TBRC) Copper Smelting and Refining, Precis and Addendum to Paper presented at the International Symposium on Copper Extraction and Refining 105th AIME Annual Meeting, Las Vegas, Nevada, February 1976.Google Scholar
  18. 18.
    Head, M. D., Englesakis, V. A., Pearson, B. C., and Wilkinson, D. H., Nickel Refining by the TBRC Smelting and Pressure Carbonyl Route. Part I. Introduction and Process Outline of the Copper Cliff Nickel Refinery. Part II Construction of the Copper Cliff Nickel Refinery. Part III The commissioning and Operation of a Carbonyl Refinery, Part IV. Technology of the TBRC Smelting and Pressure Carbonyl Processes, paper presented at 105th AIME Annual Meeting, Las Vegas, February 1976.Google Scholar
  19. 19.
    Inco Process Research, Inco Limited, Oxygen Flash Smelting in a Converter, Paper presented at the 106th AIMI Annual Meeting, Atlanta, Georgia, 6-10 March, 1977.Google Scholar
  20. 20.
    Jorgensen, F. R. A., and Segnit, E. R., Copper Flash Smelting Simulation Experiments, Proc. Australas. Inst. Min. Metall., 1977, No. 261, pp. 39–46.Google Scholar
  21. 21.
    Chaudhuri, K. B., and Melcher, G., Comparative View on the Metallurgy of the KIVCET-CS and other Direct Lead Smelting Processes, Paper presented at the 16th Annual Conference of Metallurgists, Vancouver, 22-25 August, 1977.Google Scholar
  22. 22.
    Achurra, J., Espinosa, R., and Torres, L., Improvements in Full Use of Oxygen in Reverb Furnaces at Caletones Smelter, Paper presented at the 106th AIME Annual Meeting, Atlanta Georgia, 6-10 March, 1977, AIME-TMS Paper No. A77-91.Google Scholar
  23. 23.
    Schwarze, H., Vera, G., and Pino, F., Use of New Technologies at Caletones Smelter, Paper presented at the 106th AIME Annual Meeting, Atlanta, Georgia, 6-10 March, 1977, AIME-TMS Paper No. A77-90.Google Scholar
  24. 24.
    Rana, I. A., and McCain, J. D., Automatic Anode Casting at Magma, Paper presented to the Spring 1977, AIME Arizona Conference, 21 May, 1977.Google Scholar
  25. 25.
    Senne, M. A., Start-up of the Electric Furnace at Anaconda, Paper presented at the 106th AIME Annual Meeting, Atlanta, Georgia, 6-10 March, 1977, AIME-TMS, Paper No. A77-16.Google Scholar
  26. 26.
    Draffen, J., and Winter, J. B., Inspiration Smelter Process Description and Instrument Applications, Instrumentation in the Mining and Metallurgical Industries, Volume 5, Kurzinski, E. F., ed., Proceedings of the 6th Annual Mining and Metallurgy Division Symposium and Exhibit, 2-4 November, 1977, Salt Lake City, Utah, Instrument Society of America, Pittsburgh, Pa., 1977, pp. 89–107.Google Scholar
  27. 27.
    Anonymous, Omani Copper Project Moves Foward, Mining Journal, 1977, Vol. 289, No. 7405, July 22, p. 63.Google Scholar
  28. 28.
    Anonymous, New Copper Process from Cyprus is billed as “technological breakthrough” Eng. Min.J., 1977, Vol. 178, No. 10, p. 33.Google Scholar
  29. 29.
    Swinkels, G. M., and Berezowsky, R. M. G. S., The Sheritt—Cominco Copper Process, Part I: The Process, Paper presented at the 7th Annual CIM Hydrometallurgy Section Meeting, Vancouver, B. C., August 24, 1977.Google Scholar
  30. 30.
    Kawulka, P., Kirby, C. R., and Bolton, G. L., The Sherritt—Cominco Copper Process, Part II: Pilot Plant Operation, Paper presented at the 7th Annual CIM Hydrometallurgy Section Meeting, Vancouver, B. C., August 24, 1977.Google Scholar
  31. 31.
    Maschmeyer, D. E. G., Milner, E. F. G., and Parekh, B. M., The Sherritt-Cominco Copper Process, Part III: Commercial Implications, Paper presented at the 7th Annual CIM Hydrometallurgy Section Meeting, Vancouver, B. C., August 24, 1977.Google Scholar
  32. 32.
    Aaltonen, O. A., and Juusela, J. T., Process and Apparatus for the Suspension Smelting of Concentrates or Sulphide Minerals and/or Finely divided oxides, Belgium Patent, No. 831,016, 4 July 1975 (in french).Google Scholar
  33. 33.
    Harkki, S. Aaltonen, O., and Tuominen, T., High Grade Matte Production with Oxygen Enrichment by the Outokumpu Flash Smelting Method, Ref. (11), pp. 488–507.Google Scholar
  34. 34.
    Bryk, P., Ryselin, J., Honkasalo, J., and Malmsträm, R., Flash Smelting Copper Concentrates, J. Metals 1958, Vol. 10, pp. 395–400.Google Scholar
  35. 35.
    Shibasaki, T., and Tosa, Y., Application of Computer Control to Mitsubishi Continuous Copper Smelting Process, Ref. (26), pp. 115–127.Google Scholar
  36. 36.
    Gruner, L., Treatment of Copper in the Bessemer process, Annales des Mines, 1883, Vol. 3, pp. 429–441 (in french).Google Scholar
  37. 37.
    Oryall, G. N., and Brimacombe, J. K., The Physical Behaviour of a Gas Jet Injected Horizontally into Liquid Metal, Met. Trans. B, 1976, Vol. 7B, No. 3, pp. 391–403.CrossRefGoogle Scholar
  38. 38.
    Godbehere, P. W., and Brooks, B. W., Milling of Copper Slags From the Noranda Continuous Smelting Process, Paper presented at the 106th AIME Annual Meeting, Atlanta, Georgia, 6–10 March 1977.Google Scholar
  39. 39.
    McKerrow, G. C., Pelletier, A., and Newman, C. J., Process for Controlled Slow Cooling of Non-Ferrous Smelting Slags, U.S. Patent 4,046,323, September 6, 1977.Google Scholar
  40. 40.
    Q-S Oxygen Processes Inc., Slag Scavenging for Recovery of Non-Ferrous Metal Values, British Patent 1,475,784, June 10, 1977.Google Scholar
  41. 41.
    Amman, P. R., and Kim, J.J., Pyrometallurgical Process for Smelting Nickel and Nickel-Copper Concentrates Including Slag Treatment, U.S. Patent, 4,036,636, July 19, 1977.Google Scholar
  42. 42.
    Amman, P. R., Kim, J., Redman, J. J., and Loose, T. A., Process and Apparatus for Extracting Non-Ferrous Metals from Slag, Canadian Patent 1,012,366, June 21, 1977.Google Scholar
  43. 43.
    McDonald, A. A., and Williams, V. L., Five Years’ Experience with Copper Anode Casting at Hudson Bay Mining and Smelting Co., Ltd., CIM Bulletin, 1977, Vol. 70, No. 784, pp. 153–157.Google Scholar
  44. 44.
    Sauert, F., Paschen, P., and Melcher, G. Humboldt Continuous Copper Refining Process, Paper presented at the 106th AIME Annual Meeting, Atlanta, Georgia, 6-10 March, 1977.Google Scholar
  45. 45.
    Pulling, D. H., and Garner, F. A., Application of a Continuous Technique to Secondary Copper Smelting, CIM Bulletin, 1977, Vol. 70, No. 788, pp. 122–134.Google Scholar
  46. 46.
    Pulling, D. H., and Garner, F. A., The Recovery of Secondary Copper—Its Technology and Economics, Metals and Materials, Sept. 1977, pp. 45–49.Google Scholar
  47. 47.
    Warrington, P. B., Copper Scrap Marketing, CIM Bulletin, 1977, Vol. 70, No. 784, pp. 158–160.Google Scholar
  48. 48.
    Manzone, M. G., and Opie, W. R., Recycling Copper Scrap at United States Metals Refining Company, CIM Bulletin, 1977, Vol. 70, No. 784, pp. 161–165.Google Scholar
  49. 49.
    Tarassoff, P., Pyrometallurgy J. Metals, 1976, Vol. 28, No. 3, pp. 11–14.Google Scholar
  50. 50.
    Aldag, W. J., Campbell, J. D., and Straw, H. R., Electric Furnace Smelting of Nickel Concentrates at Inco Limited, Thompson, Manitoba. Part 1: Design and Operation, Paper presented at the 106th AIME Annual Meeting, Atlanta, Georgia, 6–10 March, 1977.Google Scholar
  51. 51.
    Campbell, J. D., Straw, H. R., and Aldag, W. J., Electric Furnace Smelting of Nickel Concentrates at Inco Limited, Thompson, Manitoba, Part 2: Furnace Startup, paper presented at the 106th AIME Annual Meeting, Atlanta, Georgia, 6–10 March 1977.Google Scholar
  52. 52.
    Hess, R. A., and Orr, R. G., Electric Furnace Smelting of Nickel Concentrates at Inco Limited, Thompson, Manitoba, Part 3: Metallurgical Controls, paper presented at the 106th AIME Annual Meeting, Atlanta, Georgia, 6–10 March 1977.Google Scholar
  53. 53.
    Vallentine, R. J., How Selebi-Pikwe Ni-Cu Project Overcame Early Production Problems, World Mining, 1977, Vol. 30, No. 12, pp. 47–52.Google Scholar
  54. 54.
    Hoppe, R. W., Amax’s Port Nickel Refines the only Pure Nickel in the U.S., Eng. Min. J., 1977, Vol. 178, No. 5, pp. 76–79; Simons, C. S., Nikolic, C., and Saarinen, H., Cobalt—Nickel Separation by the Outokumpu Process: Operations at the Port Nickel Refinery of Amax Nickel Refining Co., Paper presented at the 7th Annual CIM Hydrometallurgy Section Meeting, Vancouver, B. C., August 24, 1977.Google Scholar
  55. 55.
    Anonymous, Inco Inaugurates Laterite Nickel Project on Indonesia’s Sulawesi Island, Eng. Min. J., 1977, Vol. 178, No. 5, pp. 23–24.Google Scholar
  56. 56.
    Anonymous, Exmibal tunes up to produce 28 million lb. per year of Ni, Eng. Min. J., 1977, Vol. 178, No. 11, pp. 162–165; ibid, Exmibal’s Guatemalan Nickel Laterite Project enters Producer Ranks, Eng. Min. J., 1977, Vol. 178, No. 8, p. 27, p. 30.Google Scholar
  57. 57.
    Dowsing, R. J., Nickel, Part 2. Refining, Marketing and Use, Metals and Materials, May 1977, pp. 20–26.Google Scholar
  58. 58.
    Moussoulos, L., Process for Enrichment of a Ferronickel Alloy to 90% Ni, Advances in Extractive Metallurgy 1977, ed., M. J. Jones, The Institution of Mining and Metallurgy, London, 1977, pp. 1–6.Google Scholar
  59. 59.
    Paulson, D. L., and Anable, W. E., Smelting Prereduced Nickel Concentrate in an Electric-Arc Furnce, U.S. Department of the Interior, Bureau of Mines, Report of Investigations 8196, Washington, D.C., 1977.Google Scholar
  60. 60.
    Anonymous, 1977 E/MJ Survey of Mine and Plant Expansion, Eng. Min. J., 1977, Vol. 178, No. 1, pp. 57–70.Google Scholar
  61. 61.
    Battelle Columbus Laboratories, Energy Use Patterns in Metallurgical and Nonmetallic Mineral Processing (Phase 5—Energy Data and Flowsheets, Intermediate Priority Commodities), PB 246 357, Bureau of Mines, U.S. Department of the Interior, Washington, D.C. 20241, Sept. 16, 1975.Google Scholar
  62. 62.
    Hoppe, R., Cuba: Planning Growth in Nickel, Eng. Min. J., 1977, Vol. 178, No. 11, pp. 123–126.Google Scholar
  63. 63.
    Anonymous, Mining in the Caribbean, Feature Articles in Eng. Min. J., 1977, Vol. 178, No. 11.Google Scholar
  64. 64.
    Corrick, J. D., Nickel—1977, Mineral Commodity Profiles, MCP-4, July 1977, U.S. Bureau of Mines, U.S. Department of the Interior, Washington, 1977.Google Scholar
  65. 65.
    Anonymous, Pacific Rim Conference Explores Ocean Miningand Mineral Investment, Eng. Min. J., 1978, Vol. 178, No. 10, p. 49, p. 145, Ibid, Seabed Mining—Background and Current Outlook: Systems, Methods, World Mining, 1977, Vol. 30, No. 13, pp. 54–58.Google Scholar
  66. 66.
    Davey, T. R. A., and Willis, G. M., Lead, Zinc and Tin, J. Metals, 1977, Vol. 29, No. 3, pp. 24–30.Google Scholar
  67. 67.
    Muller, E., How KIVCET CS Shaft Furnace Simultaneously smelts Pb-Zn, World Mining, 1977, Vol. 30, No. 4, pp. 46–19, p. 99.Google Scholar
  68. 69.
    Castle, J. F., and Richards, J. H., Lead Refining: Current Technology and a New Continuous Process, Ref. (58), pp. 217–234.Google Scholar
  69. 70.
    Lawson, F., Kelly, R. G., and Ward, D. H., Continuous Sulphur Drossing of Lead, Ref. (58), pp. 185–189.Google Scholar
  70. 71.
    Iley, J. D., and Ward, D. H., Development of a Continuous Process for the Fine Debismuthizing of Lead, Ref. (58), pp. 133–139.Google Scholar
  71. 72.
    Denholm, W. T., Electrolytic Removal of Bismuth from Lead by Molten Sodium Hydroxide, Ref. (58), pp. 235–244.Google Scholar
  72. 73.
    Matyas, A. G., and Street, M. D., Factors Influencing the Lead Content of Brunswick Blast Furnace Slag, CIM Bulletin, 1977, Vol. 70, No. 786, pp. 132–136.Google Scholar
  73. 74.
    Vervey, L. R., Pyrometallurgy, J. Metals, 1977, Vol. 29, No. 3, pp. 16–18.Google Scholar
  74. 75.
    Davey, T. R. A., and Willis, G. M. Lead, Zinc, Tin, J. Metals, 1976, Vol. 28, No. 3, pp. 16–21.Google Scholar
  75. 76.
    Lewis, H. M., The Outlook for Zinc, Paper presented at the 16th Annual Conference of Metallurgists, Vancouver, 22–25 August 1977.Google Scholar
  76. 77.
    Anonymous, Cominco: 1976 produced some Pluses and some Minuses, Eng. Min. J., 1977, Vol. 178, No. 6, p. 237.Google Scholar
  77. 78.
    Mackey, T. S., and Bergsoe, Smelting of Unbroken Batteries, Paper presented at the 106th AIME Annual Meeting, Atlanta, Georgia, 6–10 March, 1977, AIME-TMS Paper No. A77-107.Google Scholar
  78. 79.
    Mackey, T. S., and Bergsoe, S., Flash Agglomeration of Flue Dust, J. Metals, 1977, Vol. 29, No. 11, pp. 12–15.Google Scholar
  79. 80.
    Yasuda, M., Hirayama, H., and Kusanagi, A., Recent Operation of Electrothermic Distillation Process at Mikkaichi Smelter, Paper presented at the 106th AIME Annual Meeting, Atlanta, Georgia, 6–10 March, 1977, AIME-TMS Paper No. A77-19.Google Scholar
  80. 81.
    Kellogg, H. H., Conservation and Metallurgical Process Design, Trans. Instn. Min. Metall., (Section C, Mineral Processing and Extractive Metallurgy), 1977, Vol. 86, pp. C47–C58.Google Scholar
  81. 82.
    Nakamura, H., Hirakawa, S., and Nomura, E., Electrothermic Slag-fuming Process and Zinc Leach Residue Treatment by Lead Blast Furnace at Kamioka Smelter, Paper presented at the 106th AIME Annual Meeting, Atlanta, Georgia, 6–10 March, 1977, AIME-TMS Paper No. A77-9.Google Scholar
  82. 83.
    Suzuki, T., Uchida, H., Pickering, R. W., and Matthew, I. G., Electric Smelting of Lead Sulphate Residues, Paper presented at the 106th AIME Annual Meeting, Atlanta, Georgia, 6–10 March, 1977, AIME-TMS Paper No. A77-21.Google Scholar
  83. 84.
    Steintveit, G., Linstad, T., and Tuset, J. K., Smelting of Lead-Silver Residue and Jarosite Precipitate, Ref. (69), pp. 7–12.Google Scholar
  84. 85.
    Anonymous, Humboldt Wedag’s Cyclone-Furnace Smelting Recovers Non-Ferrous Metals, Eng. Min. J., 1977, Vol. 178, No. 10, p. 45, p. 49.Google Scholar
  85. 86.
    Instrument Society of America, Instrumentation in the Mining & Metallurgy Industries, Volume 5, Kurzinski, E. F., ed., Proceedings of the 6th Annual Mining and Metallurgy Division Symposium and Exhibit, 2–4 November 1977, Salt Lake City, Utah, Instrument Society of America, Pittsburgh, Pa., 1977.Google Scholar
  86. 87.
    Marchant, G. R., Lewis, C. K., Hales, D. B., and Coulam, W. J., Instrumentation and Control System for Continuous Smelting Process at Kennecott’s Utah Smelter, Ref. (26), pp. 51–62.Google Scholar
  87. 88.
    George, D. B., and Twede, D. R., Kennecott Converter Smelting Process, Ref. (26), pp. 109–114.Google Scholar
  88. 89.
    Daavittila, J., Automation of Flash Smelting Process, Ref. (26), pp. 75288.Google Scholar
  89. 90.
    Bailey, J. B. W., and Dutton, W. A., Control of the Noranda Process, Paper presented to the Annual Mining and Metallurgy Division Symposium, (Instrument Society of America, Pittsburgh, Pa.), Salt Lake City, Utah, 2–4 November 1977.Google Scholar
  90. 91.
    D’Arcy, J. A., and Hammond, A., Instrumentation Concepts Used at the Anaconda Company Partial Copper Roaster and 36 MVA Electric Furnace, Ref. (26), pp. 129–136.Google Scholar
  91. 92.
    Kellogg, H. H., and Henderson, J. M., Energy Use in Sulphide Smelting of Copper, Ref. (11), pp. 373–415.Google Scholar
  92. 93.
    Queneau, P. E., Oxygen Technology and Conservation, Met. Trans. B., 1977, Vol. 8B, No. 3, pp. 357–369.CrossRefGoogle Scholar
  93. 94.
    Sander, U. H. F., and Weilandt, E., Sulphuric Acid Production from Copper Smelter S02 Gases, Paper presented at the 106th AIME Annual Meeting, Atlanta, Georgia, 6–10 March, 1977.Google Scholar
  94. 95.
    Hermant, L., Corbiau,J. L., and DeKeyser,J. A., The Use of Metallurgical Gases for the Production of Sulphuric Acid at Metallurgie Hoboken—Overpelt (M.H.O.), Paper presented at the 106th AIME Annual Meeting, Atlanta, Georgia, 6–10 March, 1977.Google Scholar
  95. 96.
    Caldwell, E. J., and Sloan, R. L., Magma’s Quality Maintenance Program S02 Control, Paper presented at the 106th AIME Meeting, Atlanta, 6–10 March 1977, AIME-TMS Paper No. A77-101.Google Scholar
  96. 97.
    Ogilvie, K. M., Coverter Gas Handling and Cleaning at Kennecott Smelters, Paper presented at the 106th AIME Annual Meeting, Atlanta, Georgia, 6–10 March 1977.Google Scholar
  97. 98.
    Sawyer, J. W., A Skeptical Evaluation of the Sulphate Problem, J. Metals, 1977, Vol. 29, No. 5, pp. 11–17.Google Scholar
  98. 99.
    MacDonald, B. I., & Weiss, M., Impact of Environmental Control Expenditures on U.S. Cu, Pb and Zn Mining and Smelting, Paper presented at the American Mining Congress, San Francisco, September, 1977.Google Scholar
  99. 100.
    Suzuki, T., Uchida, H., and Mochida, H., Converter Dust Treatment at Naoshima Smelter, Paper presented at the 106th AIME Annual Meeting, Atlanta, Georgia, 6–10 March, 1977.Google Scholar
  100. 101.
    Lajzerowicz, J., and Woodbridge, R. M., Environmental Protection and Mineral Management Dilemmas in the Sudbury area, Energy Mines and Resources, Ottawa, Canada, January, 1977.Google Scholar
  101. 102.
    Ray, S. S., and Parker, F. G., Characterization of Ash from Coal-Fired Power Plants, U.S. E.P.A., Report No. EPA-600/7-77-010, EPA, NTIS Report PB-265 374, Office of Research and Development, Research Triangle Park, N.C., January, 1977.Google Scholar
  102. 103.
    Tayler, P. L., Characterization of Copper Smelter Flue Dusts, Paper presented at the 69th Annual Meeting of the Air Pollution Control Association, Portland, Oregon, 27 June—1 July, 1976.Google Scholar
  103. 104.
    Tylecote, R. F., A History of Metallurgy, The Metals Society, London, 1976.Google Scholar
  104. 105.
    Wilson, A. J. Archaeo-Metallurgy is Exploring Mining’s Ancient History, Eng. Min. J., 1977, Vol. 177, No. 12, pp. 68–73.Google Scholar
  105. 106.
    Gray, P. M. J., A cost Basis for Development of Primary Copper Production Processes, Ref. (58), pp. 147–151.Google Scholar
  106. 107.
    Richardson, F. D., Extractive Metallurgy—Some Trends and Personal Impressions, Trans. Instn. Mining Metall., (Section A: Mining Industry), 1975, Vol. 84, pp. 19–24.Google Scholar

Copyright information

© The Minerals, Metals & Materials Society 1978

Authors and Affiliations

  • P. J. Mackey
    • 1
  • G. C. Balfour
    • 1
  1. 1.Noranda Mines LimitedNorandaCanada

Personalised recommendations