Optimum reaction time, performance and exhaust emissions of biodiesel produced by microwave irradiation
- 194 Downloads
- 62 Citations
Abstract
While transesterification is well established, there remain considerable inefficiencies in existing transesterification processes. In this study an alternative energy stimulant, “microwave irradiation” was used for the production of the alternative energy source, biodiesel. The optimum parametric conditions obtained from the conventional technique were applied using microwave irradiation in order to compare both systems. The results showed that application of radio frequency microwave energy offers a fast, easy route to this valuable biofuel with advantages of enhancing the reaction rate and improving the separation process. The methodology allows for the use of high free fatty acid content feedstock, including used cooking oil; hence it helps to reduce the cost of production which constitutes a major hurdle towards widespread commercialization of biodiesel. The study also showed that the optimum reaction time for microwave-enhanced biodiesel production should be highly respected. Exceeding the optimum reaction time will lead to deterioration of both biodiesel yield and purity. This paper also reported the performance and exhaust emissions from a diesel engine when fuelled with a petroleum diesel fuel and two different biodiesel fuels; one obtained by the conventional technique and the other by microwave irradiation. It was concluded that microwave-enhanced biodiesel is not, at least, inferior to that produced by the conventional technique.
Keywords
Transesterification engine performance exhaust emissions vegetable oilPreview
Unable to display preview. Download preview PDF.
References
- Agarwal, D.; Agarwal, A. K., (2007). Performance and emissions characteristics of Jatropha oil (preheated and blends) in a direct injection compression ignition engine. Appl. Therm. Eng., 27(13), 2314–2323.CrossRefGoogle Scholar
- Barnard, T. M.; Leadbeater, N. E.; Boucher, M. B.; Stencel, L. M.; Wilhite, B. A., (2007). Continuous-Flow preparation of biodiesel using microwave heating. Energ. Fuel., 21(3), 1777–1781.CrossRefGoogle Scholar
- Cardone, M.; Prati, M. V.; Rocco, V.; Seggiani, M.; Senatore, A.; Vitolo, S., (2002). Brassica carinata as an alternative oil crop for the production of biodiesel in Italy: Engine performance and regulated and unregulated exhaust emissions. Environ. Sci. Tech., 36(21), 4656–4662.CrossRefGoogle Scholar
- Dorado, M. P.; Ballesteros, E.; Arnal, J. M.; Gomez, J.; Lopez, F. J., (2003a). Exhaust emissions from a Diesel engine fueled with transesterified waste olive oil. Fuel, 82(11), 1311–1315.CrossRefGoogle Scholar
- Dorado, M. P.; Ballesteros, E.; Arnal, J. M.; Gomez, J.; Lopez, F. J., (2003b). Testing waste olive oil methyl ester as a fuel in a ddiesel engine. Energ. Fuel., 17(6), 1560–1565.CrossRefGoogle Scholar
- Encinar, J. M.; Juan, F.; Gonzalez, J. F.; Rodriguez-Reinares, A., (2005). Biodiesel from used frying oil: Variables affecting the yields and characteristics of the biodiesel. Ind. Eng. Chem. Res., 44(15), 5491–5499.CrossRefGoogle Scholar
- Encinar, J. M.; Juan, F.; Gonzalez, J. F.; Rodriguez-Reinares, A., (2007). Ethanolysis of used frying oils: Biodiesel preparation and characterization. Fuel Process. Tech., 88(5), 513–522.CrossRefGoogle Scholar
- Fini, A.; Breccia, A., (1999). Chemistry by microwaves. Pure Appl. Chem., 71(4), 573–579.CrossRefGoogle Scholar
- Hernando, J.; Leton, P.; Matia, M. P.; Novella, J. L.; Alvarez-Builla J., (2007). Biodiesel and FAME synthesis assisted by microwaves: Homogeneous batch and flow processes. Fuel, 86(10–11), 1641–1644.CrossRefGoogle Scholar
- Kegl, B., (2006). Experimental investigation of optimal timing of the diesel engine injection pump using biodiesel fuel. Energ. Fuel., 20(4), 1460–1470.CrossRefGoogle Scholar
- Kegl, B., (2008). Effects of biodiesel on emissions of a bus diesel engine. Bioresource Tech., 99(4), 863–873.CrossRefGoogle Scholar
- Koopmans, C.; Iannelli, M.; Kerep, P.; Klink, M.; Schmitz, S.; Sinnwell, S.; Ritter, H., (2006). Microwave-assisted polymer chemistry: Heck-reaction, transesterification, Baeyer-Villiger oxidation, oxazoline polymerization, acrylamides, and porous materials. Tetrahedron, 62(19), 4709–4714.CrossRefGoogle Scholar
- Lapuerta, M.; Rodriguez-Fernandez, J.; Agudelo, J. R., (2008). Diesel particulate emissions from used cooking oil biodiesel. Bioresource Tech., 99(4), 731–740.CrossRefGoogle Scholar
- Leadbeater, N. E.; Stencel, L. M., (2006). Fast, Easy preparation of biodiesel using microwave heating. Energ. Fuel., 20(5), 2281–2283.CrossRefGoogle Scholar
- Lidstrom, P.; Tierney, J.; Wathey, B.; Westman, J., (2001). Microwave assisted organic synthesis-a review. Tetrahedron, 57(45), 9225–9283.CrossRefGoogle Scholar
- Ma, F.; Hanna, M. A., (1999). Biodiesel production: A review. Bioresour. Tech., 70(1), 1–15.CrossRefGoogle Scholar
- Mazzocchia, C.; Modica, G.; Nannicini, R.; Kaddouri, A., (2004). Fatty acid methyl esters synthesis from triglycerides over heterogeneous catalysts in the presence of microwaves. Comptes Rendus Chimie (CR ACAD SCI II C), 7(6–7), 601–605.CrossRefGoogle Scholar
- Meka, P. K; Tripathi, V.; Singh, R. P., (2007). Synthesis of biodiesel fuel from safflower oil using various reaction parameters. J. Oleo Sci., 56(1), 9–12.CrossRefGoogle Scholar
- Murillo, S.; Miguez, J. L.; Porteiro, J.; Granada, E.; Moran, J. C., (2007). Performance and exhaust emissions in the use of biodiesel in outboard diesel engines. Fuel, 86(12–13), 1765–1771.CrossRefGoogle Scholar
- Ozgunay, H.; Colak, S.; Zengin, G.; Sari, O.; Sarikahya, H.; Yuceer, L., (2007). Performance and emission study of biodiesel from leather industry pre-fleshings. Waste Manag., 27(12), 1897–1901.CrossRefGoogle Scholar
- Pramanik, K. (2003). Properties and use of jatropha curcas oil and diesel fuel blends in compression ignition engine. Renew. Energ., 28(2), 239–248.CrossRefGoogle Scholar
- Ramadhas, A. S., Muraleedharan, C., Jayaraj, S., (2005). Performance and emission evaluation of a diesel engine fueled with methyl esthers of rubber seed oil. Renew. Energ., 30(12), 1789–1800.CrossRefGoogle Scholar
- Refaat, A. A.; Attia, N. K.;, Sibak, H. A.; El Sheltawy, S. T.; ElDiwani, G. I., (2008). Production Optimization and Quality Assessment of Biodiesel from Waste Vegetable Oil. Int. J. Environ. Sci. Tech., 5(1), 75–82.Google Scholar
- Saifuddin, N.; Chua, K. H., (2004). Production of ethyl ester (Biodiesel) from used Frying oil: Optimization of transesterification process using microwave irradiation. Malaysian J. Chem, 6(1), 77–82.Google Scholar
- Schuchardt, U.; Serchelia, R.; Vargas, R. M., (1998). Transesterification of vegetable oils: A review. J. Brazil. Chem. Soc., 9(1), 199–210.Google Scholar
- Singh, A. B. H.; Thompson, J.; Van Gerpen, J., (2006). Process optimization of biodiesel production using different alkaline catalysts. Appl. Eng. Agric., 22(4), 597–600.Google Scholar
- Tat, M. E.; Van Gerpen, J. H.; Wang, P. S., (2007). Fuel property effects on injection timing, ignition timing, and oxides of nitrogen emissions from biodiesel-fueled engines. Am. Soc. Agricultural Eng., 50(4), 1123–1128.Google Scholar
- Usta, N., (2005). Use of tobacco seed oil methyl ester in a turbocharged indirect injection diesel engine. Biomass Bioenerg., 28(1), 77–86.CrossRefGoogle Scholar
- Van Gerpen, J., (2005). Biodiesel processing and production. Fuel Process. Tech., 86(10), 1097–1107.CrossRefGoogle Scholar
- Varma, R. S., (2001). Solvent-free accelerated organic syntheses using microwaves. Pure Appl. Chem., 73(1), 193–198.CrossRefGoogle Scholar
- Zhou, W.; Boocock, D. G. V., (2003). Ethyl esters from the single-phase base-catalyzed ethanolysis of vegetable oils. J. Am. Oil Chem. Soc., 80(4), 367–371.CrossRefGoogle Scholar