JOM

, Volume 39, Issue 11, pp 18–21 | Cite as

Rheocasting Al Matrix Composites

  • F. A. Girot
  • L. Albingre
  • J. M. Quenisset
  • R. Naslain
Process Research Summary

Abstract

Aluminum alloy matrix composites reinforced by SiC short fibers (or whiskers) can be prepared by rheocasting, a process which consists of the incorporation and homogeneous distribution of the reinforcement by stirring within a semi-solid alloy. Using this technique, composites containing fiber volume fractions in the range of 8–15%, have been obtained for various fibers lengths (i.e., 1 mm, 3 mm and 6 mm for SiC fibers). This paper attempts to delineate the best compocasting conditions for aluminum matrix composites reinforced by short SiC (e.g Nicalon) or SiC whiskers (e.g., Tokamax) and characterize the resulting microstructures.

Keywords

Fiber Length Auger Electron Spectroscopy Fiber Volume Fraction Aluminum Matrix Composite Silicon Phase 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    J.P. Rocher, F.A. Girot, R. Pailler, J.M. Quenisset and R. Naslain, Mémoires et Etudes Scientifiques-Revue de Métallurgie, Feb. 1986, pp. 69–85.Google Scholar
  2. 2.
    F.A. Girot, J.M. Quenisset and R. Nasalin, submitted to Metallurgical Transactions.Google Scholar
  3. 3.
    A Cornie, in Proceeding, Microstructure, and Processing of Metal and Ceramic Matrix Composites, MIT Fall Symposium, Nov. 1986.Google Scholar
  4. 4.
    M. Suéry and C. Milliére, “Advanced Materials Research and Developments for Transport, Composites VIII, (P. Lamicq, W.J.G. Bunk and J.G. Wurm, eds.), Editions de Physique, Les Ulis, France (1985), pp. 241–248.Google Scholar
  5. 5.
    J. Szekely, in Proceeding, Microstructure, and Processing of Metal and Ceramic Matrix Composites, MIT Fall Symposium, Nov. 1986.Google Scholar
  6. 6.
    C. Milliére, J.F. Secondé, P. Secordel and M. Suéry, Mémoires et Etudes Scientifiques-Revue de Métallurgie, (1983), pp. 277–299.Google Scholar
  7. 7.
    G.V.M. Wijk and D.M. Ackermann, Proc. of the 107th AIME Meeting, Denver, Colorado, Feb. 1978.Google Scholar

Copyright information

© TMS 1987

Authors and Affiliations

  • F. A. Girot
  • L. Albingre
  • J. M. Quenisset
  • R. Naslain

There are no affiliations available

Personalised recommendations