Application of life cycle inventory analysis to fuel tank system design

  • Gregory A. Keoleian
  • Sabrina Spatari
  • Robb T. Beal
  • Robert D. Stephens
  • Ronald L. Williams
LCA case studies

Abstract

Life Cycle Assessment is becoming an important tool for guiding environmental design improvements in the automotive industry. This paper reports the life cycle inventory profiles for two fuel tank systems based on a collaborative effort between the National Pollution Prevention Center at the University of Michigan, General Motors Research and Development, and the National Risk Management Research Laboratory of the U.S. Environmental Protection Agency. Two 31 gallon functionally equivalent fuel tank systems used on a 1996 light duty vehicle were investigated: a multi-layer HDPE tank with a steel shield and PVC coated steel straps, and a steel tank with a HDPE shield and painted steel straps. Overall, the HDPE fuel tank system is environmentally preferable to the steel tank system based on the set of inventory results presented in this investigation. The Life Cycle Inventory analysis indicated lower energy burdens for the HDPE tank system and comparable solid waste burdens for both systems. The total life cycle energy consumption for the steel and HDPE tank systems were 4.9 GJ and 3.6 GJ per tank, respectively. The energy consumption and most of the air pollutants inventoried occurred as a consequence of the use phase. The solid wastes were generated primatily during the material production phase for the steel tank (13 kg) and during the end-of-life management phase for the HDPE tank (14 kg). This study also highlights data analysis and modeling challenges, including manufacturing and use phase allocation methods.

Keywords

Automotive industry, fuel tank, LCI HDPE, fuel tank, LCI LCI, automotive industry, fuel tank systems fuel tank systems, LCI product system design, automotive industry, LCI 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. American Plastics Council: Economics of Recovery and Recycling, 1994Google Scholar
  2. Barlow, A.;Contos, D.;Holdren, M.;Garrison, P.;Harris, L.;Janke, B.: Development of Emission Factors for Polyethylene Processing, Journal of the Air and Waste Management Association 46 (June 1996), 569–580, 1996Google Scholar
  3. Boustead, I.: Eco-Profiles of the European Plastics Industry - Polyethylene and Polypropylene: Report 3: The European Centre for Plastics in the Environment, Belgium, Brussels, 1993Google Scholar
  4. Boustead, I.: Eco-Profiles of the European Plastics Industry, Report 6: Polyvinyl Chloride (PVC). The European Centre for Plastics in the Environment, Belgium, Brussels, 1994Google Scholar
  5. CFR. 40 CFR Part 81 Section 86.094-8, 1994Google Scholar
  6. FOEFL Swiss Federal Office of Environment, Forests, and Landscape: Ecobalance of Packaging Materials State of 1990, Switzerland, Bernes, 1991Google Scholar
  7. Franklin Associates: Appendix A: Energy Requirements and Environmental Emissions for Fuel Consumption, Franklin Associates, Prairie Village, KS, 1992Google Scholar
  8. Fussler, C.R.;Krummenacher B.: Ecobalances: A Key to Better Environmental Material Choices in Automotive Design, Materials and Design 12 (3), 123–128 (1991)CrossRefGoogle Scholar
  9. General Motors, Corporate Data, 1996Google Scholar
  10. International Iron and Steel Institute: Competition Between Steel and Aluminum for the Passenger Car , Belgium, Brussels, 1994Google Scholar
  11. Kar, K.;Keoleian G. A.: Application of life cycle design to aluminum intake manifolds, SAE International Congress and Exposition, Detroit, Ml, 26 February, Society of Automotive Engineers (SAE), Warrendale, PA, 1996Google Scholar
  12. Keoleian, G.A.;Kar, K.;Manion, M.M.;Bulkley, J.W.: Industrial Ecology of the Automobile: A Life Cycle Perspective, Society of Automotive Engineers (SAE): Warrendale, PA, 1997bGoogle Scholar
  13. Keoleian, G.A.;Menerey, D.: Life Cycle Design Guidance Manual: Environmental Requirements and the Product System, US EPA, Office of Research and Development, Risk Reduction Engineering Laboratory, Cincinnati, OH, 1993Google Scholar
  14. Keoleian, G.A.;Spatari, S.;Beal, R.T.: Life Cycle Design of Fuel Tank Systems. US Environmental Protection Agency, Office of Research and Development, National Risk Management Research Laboratory, Cincinnati, OH, 1997aGoogle Scholar
  15. Office for the Study of Automotive Transportation: Delphi VIII: Forecast and Analysis of the North American Automotive Industry: Volume 3 Materials, University of Michigan Transportation Research Institute, Ann Arbor, MI UMTRI-96-01- 03, 1996Google Scholar
  16. Ross, M.;Goodwin, R.;Watkins, R.;Wang, M.Q.;Wenzel, T.: Real-World Emissions from Model Year 1993, 2000 and 2010 Passenger Cars, American Council for an Energy-Efficient Economy, Washington DC, 1995Google Scholar
  17. SETAC Workshop Report - A Technical Framework for Life-Cycle Assessment, Smugglers Notch, VT, 18 August 1990, Washington, DC: Society of Environmental Toxicologists and Chemists, 1991Google Scholar
  18. Sullivan, J. L.;Hu, J.: Life cycle energy analysis for automobiles, SAE Total Life Cycle Conference, Vienna, 16 October, Society of Automotive Engineers (SAE), Warrendale, PA, SAE Paper 951829, 1995Google Scholar
  19. Vigon, B.W.;Tolle, D.A.;Cornary, B.W.;Latham, H.C.;Harrison, C.L.;Boucuski, T.L.;Hunt, R.G.;Sellers., J.D.: Life Cycle Assessment: Inventory Guidelines and Principles, US Environmental Protection Agency, Risk Reduction Engineering Laboratory, Cincinnati, OH EPA/600/R-92/245, 1993Google Scholar
  20. Wood, R.: Automotive Engineering Plastics, London, Pentech, 1991Google Scholar
  21. Wythe, S.: Stevens Institute of Technology, personal communication, 1996Google Scholar
  22. Yamato, M.;Yoshihito M.: Life Cycle Inventory Study of Automotive Fuel Tank, Life Cycle Inventory Study of Automotive Fuel Tank, Proceedings of the 1997 Total Life Cycle Conference - Life Cycle Management and Assessment (Part 1), Society of Automotive Engineers (SAE), Warrendale, PA, SAE Paper 971177, 1997Google Scholar

Copyright information

© Ecomed Publishers 1998

Authors and Affiliations

  • Gregory A. Keoleian
    • 1
  • Sabrina Spatari
    • 1
  • Robb T. Beal
    • 1
  • Robert D. Stephens
    • 2
  • Ronald L. Williams
    • 2
  1. 1.National Pollution Prevention CenterUniversity of MichiganUSA-Ann ArborUSA
  2. 2.General MotorsResearch DevelopmentUSA-WarrenUSA

Personalised recommendations