Advertisement

Metallurgical and Materials Transactions B

, Volume 1, Issue 5, pp 1121–1143 | Cite as

The relation between polycrystal deformation and single-crystal deformation

  • U. F. Kocks
Article

Abstract

A phenomenological description of crystallographic slip and pencil glide in single crystals is outlined, with emphasis on the behavior under prescribed strains. Theoretical relations are established between these single-crystal properties and the behavior of quasi-homogeneous, quasi-isotropic polycrystals deforming uniformly on a macroscopic scale, at subdiffusive temperatures. Experimental comparisons between single crystals and polycrystals are reviewed, considering flow stress, work hardening, temperature and strain rate effects, and various effects of grain size.

Keywords

Slip System Slip Plane Yield Surface Metallurgical Transaction Volume Yield Locus 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    L. A. Johnson, U. F. Kocks and B. Chalmers:Scripta Met., 1968, vol.2, pp.265–70. la. L. A. Johnson:Trans. TMS-AIME, 1969, vol. 245, pp. 275–82.CrossRefGoogle Scholar
  2. 2.
    E. Schmid:Proc. Int’l. Cong. Appl. Mech. (Delft), 1924, p. 342.Google Scholar
  3. 3.
    F. A. McClintock and A. S. Argon:Mechanical Behavior of Materials, Addison-Wesley, 1966.Google Scholar
  4. 4.
    G. Y. Chin, R. N. Thurston and E. A. Nesbitt:Trans. TMS-AIME, 1966, vol.236, p. 69.Google Scholar
  5. 5.
    T. H. Lin:J. Franklin Inst, 1960, vol.270, pp. 291–300.CrossRefGoogle Scholar
  6. 6.
    U. F. Kocks: Ph.D. thesis, 1959, Harvard Univ., Cambridge, Mass.Google Scholar
  7. 7.
    J. F. W. Bishop:Phil. Mag., 1953, vol.44, pp. 51–64.CrossRefGoogle Scholar
  8. 8.
    A. V. Hershey:J. Appl. Mech., 1954, vol.21, pp. 241–49.Google Scholar
  9. 9.
    U. F. Kocks and T. J. Brown:Acta Met., 1966, vol.14, pp. 87–98.CrossRefGoogle Scholar
  10. 10.
    U. F. Kocks:Acta Met., 1958, vol.6, pp. 85–94.CrossRefGoogle Scholar
  11. 11.
    W. F. Hosford, Jr.:Trans. TMS-AIME, 1965, vol.233, pp. 329–33.Google Scholar
  12. 1la.
    G. Y. Chin, E. A. Nesbitt and A. J. Williams:Acta Met., 1966, vol.14, pp. 467–76.CrossRefGoogle Scholar
  13. 11b.
    E. W. Kelley and W. F. Hosford, Jr.:Trans. TMS-AIME, 1968, vol.242, pp. 5–13, 654–60.Google Scholar
  14. 12.
    U. F. Kocks:Acta Met., 1960, vol.8, pp. 345–52.CrossRefGoogle Scholar
  15. 13.
    G. I. Taylor:J. Inst. Met., 1938, vol.62, pp. 307–24;S. Timoshenko Anniversary Volume, pp. 218–24, Macmillan, 1938;Deformation and Flow of Solids, pp. 3–12, Springer, 1956.Google Scholar
  16. 14.
    G. Y. Chin, W. L. Mammel and M. T. Dolan:Trans. TMS-AIME, 1967, vol.239, pp. 1854–55.Google Scholar
  17. 15.
    W. F. Hosford, Jr.:Acta Met., 1966, vol.14, pp. 1085–94.CrossRefGoogle Scholar
  18. 16.
    U. F. Kocks:Phil. Mag., 1964, vol.10, pp. 187–93.CrossRefGoogle Scholar
  19. 17.
    H. R. Piehler:Met. Trans., 1970, vol. 1, in press.Google Scholar
  20. 18.
    W. E Hosford, Jr.: private communication, Univ. of Michigan, Ann Arbor, Mich.Google Scholar
  21. 19.
    U. F. Kocks:Trans. TMS-AIME, 1964, vol.230, pp. 1160–67.Google Scholar
  22. 20.
    B. Ramaswami, U. F. Kocks and B. Chalmers:Trans. TMS-AIME, 1965, vol.233, pp. 927–31.Google Scholar
  23. 21.
    O. Krisement, G. F. de Vries and F. Bell:Phys. Stat. Sol, 1964, vol.6, pp. 73–81.CrossRefGoogle Scholar
  24. 22.
    Y. Nakada and A. S. Keh:Acta Met., 1966, vol.14, p. 961.CrossRefGoogle Scholar
  25. 23.
    P. J. Jackson and Z. S. Basinski:Can. J. Phys., 1967, vol.45, pp. 707–35.CrossRefGoogle Scholar
  26. 24.
    E. J. H. Wessels and P. J. Jackson:Acta Met., 1969, vol.17, pp. 241–8.CrossRefGoogle Scholar
  27. 25.
    U. F. Kocks and D. G. Westlake:Trans. TMS-AIME, 1967, vol.239, pp. 1107–09.Google Scholar
  28. 26.
    E. Kröner:Z. Physik., 1958, vol.151, pp. 504–18.CrossRefGoogle Scholar
  29. 27.
    E. Kröner:Acta Met., 1961, vol.9, pp. 155–61.CrossRefGoogle Scholar
  30. 28.
    J. D. Eshelby:Proc. Roy. Soc., 1957, vol.A241, p. 376.CrossRefGoogle Scholar
  31. 29.
    R.E. Hook, J. P. Hirth:Acta Met., 1967, vol.15, pp. 535–51, 1099–1110.CrossRefGoogle Scholar
  32. 30.
    J. R. Willis:Quart. J. Mech. Appl. Math., 1964, vol.17, p. 157.CrossRefGoogle Scholar
  33. 31.
    R. Hill:J. Mech. Phys. Sol., 1965, vol.13, pp. 89–101.CrossRefGoogle Scholar
  34. 32.
    H. Payne, S. J. Czyzak, J. H. Greiner, and T. H. Lin:J. Mech. Phys. Sol., 1958, vol.6, pp. 314–20.CrossRefGoogle Scholar
  35. 33.
    B. Budiansky and T. T. Wu: Proc. 4th Cong. Appl. Mech., 1962, p. 1175.Google Scholar
  36. 34.
    J. W. Hutchinson:J. Mech. Phys. Sol., 1964, vol.12, pp. 11–24.CrossRefGoogle Scholar
  37. 35.
    W. Voigt:Wied. Ann., 1889, vol.38, p. 573.CrossRefGoogle Scholar
  38. 36.
    A. Reuss:Z. Angew. Math. Mech., 1929, vol.9, p. 49.CrossRefGoogle Scholar
  39. 37.
    R. Hill:Proc. Phys. Soc. London, 1952, vol.A65, p. 351.Google Scholar
  40. 38.
    D. C. Drucker, H. J. Greenberg, and W. Prager:J. Appl Mech., 1951, vol.18, pp. 371–78.Google Scholar
  41. 39.
    R. Hill:Phil. Mag., 1951, vol.42, pp. 868–75.CrossRefGoogle Scholar
  42. 40.
    R. svon Mises:Z. Angew. Math. Mech., 1928, vol.8, pp. 161–85.CrossRefGoogle Scholar
  43. 41.
    A. Kochendörfer:Plastische Eigenschaften, 1941, Springer.Google Scholar
  44. 41a.
    G. Y. Chin and W. L. Mammel:Trans. TMS-AIME, 1969, vol.245, p. 1211.Google Scholar
  45. 42.
    J. F. W. Bishop and R. Hill:Phil. Mag, 1951, vol.42, pp. 414–27, 1298–1307.CrossRefGoogle Scholar
  46. 43.
    R. Hill:J. Mech. Phys. Sol, 1967, vol.15, pp. 79–95.CrossRefGoogle Scholar
  47. 44.
    F. R. N. Nabarro, Z. S. Basinski, and D. B. Holt:Adv. Phys., 1964, vol.13, p.193.CrossRefGoogle Scholar
  48. 45.
    H. Tresca:Mem. Sav. Acad. Sci. Paris, 1872, vol.20, p. 281.Google Scholar
  49. 46.
    R. von Mises:Göttinger Nachr., Math-Phys., 1913, p. 582.Google Scholar
  50. 47.
    U. Dehlinger:Z. Metallic., 1943, vol.35, p. 182.Google Scholar
  51. 48.
    U. Dehlinger, J. Diehl, and J. Meissner:Z. Naturf, 1956, vol.1 la, pp. 37–41.Google Scholar
  52. 49.
    G. I. Taylor:Proc. Roy. Soc, 1934, vol.A145, p. 1.CrossRefGoogle Scholar
  53. 50.
    M. Roš and A. Eichinger: Proc. 2nd Int’l. Cong. Appl. Mech., Zürich, 1926, p. 315; see also J. L. M. Morrison:Proc. Inst. Mech. Eng., 1942, vol. 144, p. 33.Google Scholar
  54. 51.
    R. Hill:Math. Theory of Plasticity, Clarendon Press, Oxford, 1950.Google Scholar
  55. 52.
    W. Sautter, A. Kochendörfer, and U. Dehlinger:Z. Metallk., 1953, vol.44, pp.442–553.Google Scholar
  56. 53.
    V. S. Lensky: in Plasticity, 2nd Symp. Nav. Struct. Mech., Brown Univ., E.H. Lee, ed., Pergamon Press, 1960.Google Scholar
  57. 54.
    G. I. Taylor: inDeformation and Flow of Solids, pp. 3–12, IUTAM Colloq. Madrid, 1955, Springer, 1956.Google Scholar
  58. 55.
    J. W. Hutchinson:J. Mech Phys. Sol., 1964, vol.12, pp. 25–33.CrossRefGoogle Scholar
  59. 56.
    G. Y. Chin and W. L. Mammel:Trans. TMS-AIME, 1967, vol.239, pp. 1400–05.Google Scholar
  60. 57.
    U. E Kocks:Can. J. Phys., 1967, vol.45, p. 1134.CrossRefGoogle Scholar
  61. 58.
    J. F. W. Bishop:J. Mech Phys. Sol., 1954, vol.3, pp. 130–42.CrossRefGoogle Scholar
  62. 59.
    T. H. Lin and B. Lieb:J. Mech. Phys. Sol., 1962, vol.10, pp. 65–72.CrossRefGoogle Scholar
  63. 60.
    See I. L. Dillamore and W. T. Roberts:Met. Rev., 1965, vol.10, pp. 271–380.CrossRefGoogle Scholar
  64. 61.
    G. Y. Chin: inTextures in Research and Practice, J. Grewen and G. Wassermann, eds., pp. 51–80, Springer, 1969.Google Scholar
  65. 62.
    G. Sachs:Z. Verein Deut. Ing., 1928, vol.72, p. 734.Google Scholar
  66. 63.
    H. L. Cox and D. G. Sopwith:Proc. Phys. Soc. London, 1937, vol.49, p. 134.CrossRefGoogle Scholar
  67. 64.
    A. Kochendörfer and M. Swanson:Arch. Eisenhüttenw., 1960, vol.31, pp.549–53.CrossRefGoogle Scholar
  68. 65.
    Ch. Schwink:phys. stat. sol., 1965, vol.8, pp. 457–74.CrossRefGoogle Scholar
  69. 66.
    Ch. Schwink and W. Vorbrugg:Z. Naturforsch, 1967, vol.22a, pp. 626–42.Google Scholar
  70. 67.
    U. F. Kocks: Diplom Thesis, Univ. of Göttingen, 1954.Google Scholar
  71. 68.
    G. Masing:Lehrbuch der Allgemeinen Metallkunde, p. 388, Springer, 1950.Google Scholar
  72. 69.
    G. Zankl:Z. Naturforsch., 1963, vol.18a, p. 795.Google Scholar
  73. 70.
    H. Wilsdorf and D. Kuhlmann-Wilsdorf:Z. Angew. Physik., 1952, vol.4, p.409.Google Scholar
  74. 71.
    U. Essmann, M. Rapp, and M. Wilkens:Acta Met., 1968, vol.16, pp. 1275–87.CrossRefGoogle Scholar
  75. 72.
    U. F. Kocks, H. S. Chen, D. A. Rigney, and R. J. Schaefer: inWork Hardening, pp. 151–75, Gordon and Breach, 1968.Google Scholar
  76. 73.
    A. S. Keh:Phil. Mag., 1965, vol.12, p. 9.CrossRefGoogle Scholar
  77. 74.
    E. Schmid and W. Boas: Plasticity of Crystals, p. Hughes, London, (original published in 1935).Google Scholar
  78. 75.
    J. Diehl:Z. Metallk., 1956, vol.47, pp. 331–43.Google Scholar
  79. 76.
    H. Knöll and E. Macherauch:Z. Metallk., 1964, vol.55, pp. 638–45.Google Scholar
  80. 77.
    S. Howe and C. Elbaum:Phil. Mag, 1961, vol.6, pp. 37–8.CrossRefGoogle Scholar
  81. 78.
    F. P. Bullen and C. B. Rogers:Phil. Mag., 1964, vol.9, pp. 401–12.CrossRefGoogle Scholar
  82. 78a.
    F.P. Bullen, S. McK. Cousland:phys. stat. sol., 1968, vol.27, pp. 501–12.CrossRefGoogle Scholar
  83. 79.
    P. Derner and E. Kappler:Z. Naturforsch., 1959, vol.14a, pp. 1080–81, 1082.Google Scholar
  84. 80.
    R. S. Davis, R. L. Fleischer, J. D. Livingston, and B. Chalmers:Trans. AIME, 1957, vol.209, pp. 136–40.Google Scholar
  85. 81.
    J. D. Livingston and B. Chalmers:Acta Met., 1957, vol.5, pp. 322–27.CrossRefGoogle Scholar
  86. 82.
    R. L. Fleischer and B. Chalmers:Trans. Met. Soc. AIME. 1958, vol.212, pp.265–74.Google Scholar
  87. 83.
    J. J. Häuser and B. Chalmers:Acta Met., 1961, vol.9, pp. 802–18.CrossRefGoogle Scholar
  88. 84.
    D. A. G. Bruggeman: Doctoral Dissertation, Utrecht, 1930.Google Scholar
  89. 85.
    F. Rhines:Met. Trans., 1970, vol.1, pp. 1105–20.CrossRefGoogle Scholar
  90. 86.
    F. R. N. Nabarro: inSome Recent Developments in Rheology, p. 38, London, The British Rheologists’ Club, 1950.Google Scholar
  91. 87.
    J. C. M. Li:Trans. Met. Soc. AIME, 1963, vol.227, p. 239.Google Scholar
  92. 88.
    E. Macherauch:Z. Metallk., 1964, vol.55, pp. 60–82.Google Scholar
  93. 89.
    R. Armstrong, I. Codd, R. M. Douthwaite, and N. J. Petch:Phil. Mag., 1962, vol.7, pp. 45–58. (See also this issue.)CrossRefGoogle Scholar
  94. 90.
    S. Mader:Z. Phys., 1957, vol.149, p. 73.CrossRefGoogle Scholar
  95. 91.
    R. P. Carreker and W. R. Hibbard:Acta Met., 1953, vol.1, pp. 654–63.CrossRefGoogle Scholar
  96. 92.
    R. P. Carreker and W. R. Hibbard:Trans. AIME, 1957, vol.209, p. 112.Google Scholar
  97. 93.
    R. P. Carreker and W. R. Hibbard:Trans. AIME, 1957, vol.209, p. 1157.Google Scholar
  98. 94.
    H. Conrad, S. Feuerstein, and L. Rice:Mat. Sci. Eng., 1967, vol.2, pp. 157–68.CrossRefGoogle Scholar
  99. 95.
    U. E Kocks:Phil. Mag., 1966, vol.13, pp. 541–66.CrossRefGoogle Scholar
  100. 96.
    D. McLean:Mechanical Properties of Metals, pp. 303–07, Wiley, 1962.Google Scholar
  101. 97.
    J. Washburn and E. R. Parker:Trans. AIME, 1952, vol.194, p. 1076.Google Scholar

Copyright information

© The Minerals, Metals & Materials Society - ASM International - The Materials Information Society 1970

Authors and Affiliations

  • U. F. Kocks
    • 1
  1. 1.Materials Science DivisionArgonne National LaboratoryArgonne

Personalised recommendations