Advertisement

JOM

, Volume 54, Issue 1, pp 25–29 | Cite as

Microstructure modeling and prediction during thermomechanical processing

  • A. J. Beaudoin
  • R. Srinivasan
  • S. L. Semiatin
Conference Review Microstucture Modeling and Prediction

Keywords

Shear Band Dynamic Strain Aging Thermomechanical Processing Selective Laser Sinter Microstructure Modeling 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    M.T. Lusk et al., “Microstructural Evolution in Sprayformed Steel: Phase Transitions, Inelasticity, Residual Stress and Distortion,” Microstructure Modeling and Prediction During Thermomechanical Processing, ed. R. Srinivasan et al. (Warrendale, PA: TMS, 2001), pp. 75–84.Google Scholar
  2. 2.
    D.L. Bourell, M. Wohlert, and N. Harlan, “Applications of Powder Sintering to Selective Laser Sintering,” in Ref. 1, pp. 201–210.Google Scholar
  3. 3.
    L. Zhu, A.J. Beaudoin, and S.R. MacEwen, “A Study of the Kinetics in Stress Relaxation of AA 5182,” in Ref. 1, pp. 189–199.Google Scholar
  4. 4.
    V. Venkatesh and S.R Fox, “Development of Damage Maps for Ti-6AI-4V Processing,” in Ref. 1, pp. 147–156.Google Scholar
  5. 5.
    A.O. Humphreys et al., “Prediction of Microstructural Development During the Warm Rolling of LC and IF Steels,” in Ref. 1, pp. 95–103.Google Scholar
  6. 6.
    G. Sarma, B. Radhakrishnan, and T. Zacharia, “Mesoscale Simulations of Microstructure and Texture Evolution During Deformation of Columnar Grains,” in Ref. 1, pp. 37–46.Google Scholar
  7. 7.
    H.K. Kim and S.I. Oh, “Micro Forming Analysis by Finite Element Method Using Couple Stress Crystal Plasticity,” in Ref. 1, pp. 15–26.Google Scholar
  8. 8.
    A.A. Salem, S.R. Kalidindi, and R.D. Doherty, “Strain Hardening Regimes and Microstructure Evolution During Large Strain Compression of High Purity Titanium,” submitted for publication toScripta Materialia (August 2001).Google Scholar
  9. 9.
    T.R. Bieler and S.L. Semiatin, “Analysis of Primary Hot Working of Ti-6AI-4V with Orientation Imaging,” in Ref. 1, pp. 27–36.Google Scholar
  10. 10.
    PR. Dawson, personal communication (2001).Google Scholar
  11. 11.
    S. Venugopal, V. Madurai Muthu,and S.L. Mannan, “Optimization of Microstructure Development During Hot Working of Austenitic Stainless Steels Using Models for Evolution of Microstructure,” in Ref. 1, pp. 85–94.Google Scholar
  12. 12.
    S. Takahashi et al., “The Microstructure Prediction Model of Forged U720LI,” in Ref. 1, pp. 167–173.Google Scholar
  13. 13.
    D. Huang et al., “Computer Simulation of Microstructure Evolution during Hot Forging ofWaspaloy and Nickel Alloy 718” in Ref. 1, pp. 137–146.Google Scholar
  14. 14.
    B.R. Bewlay et al., “Mechanisms of Grain Refinement and Superplastic Behavior of Alloy 718,” in Ref. 1, pp. 175–185.Google Scholar
  15. 15.
    K. Okuda and A.D. Rollett, “Monte Carlo Simulation of Recrystallization and Grain Growth in Steels: Preliminary Results,” in Ref. 1, pp. 57–66.Google Scholar
  16. 16.
    B. Radhakrishnan et al., “Mesoscale Modeling of Abnormal Subgrain Growth,” in Ref. 1, pp. 47–56.Google Scholar
  17. 17.
    Z. Li, R.V. Grandhi, and R. Srinivasan, “Optimum Design of Process Parameters to Minimize Distortion During Gas Quenching Process,” in Ref. 1, pp. 125–134.Google Scholar
  18. 18.
    S.G. Hong et al., “Precipitation Behavior in Nb-Ti Microalloyed HSLA Steels,” in Ref. 1, pp. 115–124.Google Scholar
  19. 19.
    B.L. Adams, S.R. Kalidindi, and H. Garmestani, “Spectral Representation of Microstructure Evolution in Polycrystals,” in Ref. 1, pp. 67–72.Google Scholar
  20. 20.
    Wei et al., “Accelerated Insertion of Materials for Aircraft Engine Superalloy Applications,” in Ref. 1, ed. R. Srinivasan et al. (Warrendale, PA: TMS, 2001), pp. 3–12.Google Scholar

Copyright information

© Springer-Verlag 2002

Authors and Affiliations

  • A. J. Beaudoin
    • 1
  • R. Srinivasan
    • 2
  • S. L. Semiatin
    • 3
  1. 1.Mechanical Engineering DepartmentUniversity of IllinoisUSA
  2. 2.Mechanical and Materials Engineering DepartmentWright State UniversityUSA
  3. 3.Materials Processing/Processing Science, Air Force Research LaboratoryAFRL/ML

Personalised recommendations