Advertisement

Refractories and Industrial Ceramics

, Volume 39, Issue 1, pp 3–10 | Cite as

Unfired light-weight fireclay refractories produced by active synthesis of high-temperature structural elements in a hydrothermal-force field

  • V. N. Sokov
Research
  • 28 Downloads

Abstract

The theoretical views underlying the manufacture of unfired light-weight fireclay refractories are set forth. It is hypothesized that fireclay mixes should include a chemically active ingredient to act as a catalyst and an electrolyte and to promote the active synthesis of high-temperature structural elements in the course of molding in a heat-and-force field, short-term drying, and service.

Keywords

Foam Sodium Silicate Active Synthesis Green Ware Mold Plate 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    V. N. Sokov,Ogneupory, No. 7-8, 12–14 (1992)Google Scholar
  2. 2.
    V. N. Sokov,Ogneupory, No. 7, 17–25 (1994).Google Scholar
  3. 3.
    V. N. Sokov, B. A. Dzhandarbekov, V. A. Naumenko, and N. P. Galakuev,Ogneupory, No. 2, 27–29 (1993).Google Scholar
  4. 4.
    S. R. Zamyatin, A. K. Purgin and L. B. Khoroshavin (eds.),Refractory Concretes [in Russian], Metallurgiya, Moscow (1982).Google Scholar
  5. 5.
    A. A. Pashchenko,Tsementy, No. 8, 20–21 (1970).Google Scholar
  6. 6.
    K. K. Strelov and S. R. Zamyatin,Ogneupory, No. 9, 25–28 (1977).Google Scholar
  7. 7.
    P. P. Budnikov and B. G. Duderov, in:Trudy MKhTI im. D. I. Mendeleeva, Issue 50 [in Russian], Moscow (1966), pp. 221–226.Google Scholar
  8. 8.
    V. N. Sokov,Ogneupory, No. 8, 6–11 (1995).Google Scholar
  9. 9.
    V. M. Shcherbitskaya and A. D. Kondratenko,Refractory Concretes for Tunnel Kiln Cars [in Russian], Naukova Dumka, Kiev (1976).Google Scholar
  10. 10.
    M. G. Maslennikova and A. L. Karpova, in:Refractory Concretes [in Russian], Stroiizdat, Moscow (1974), pp. 126–133.Google Scholar
  11. 11.
    K. D. Nekrasov and G. M. Aleksandrova, in:Refractory Concretes [in Russian], Stroiizdat Moscow (1974), pp. 107–113.Google Scholar
  12. 12.
    A. E. Gurevich,R. I. (VNIIÉSM), Ser. 4, No. 3, 12 (1974).Google Scholar
  13. 13.
    A. A. Gasparyan, A. E. Gurevich, and Yu. G. Duderov, in:Technology and Properties of Phosphate Materials [in Russian], Stroiizdat, Moscow (1974), pp. 150–155.Google Scholar
  14. 14.
    K. V. Roze,R. I. (VNIIÉSM), Ser. 4, No. 3 6–8 (1974).Google Scholar
  15. 15.
    A. A. Gasparyan, Yu. G. Duderov, and K. V. Roze, in:Technology and Properties of Phosphate Materials [in Russian], Stroiizdat, Moscow (1974), pp. 144–150.Google Scholar
  16. 16.
    K. D. Nekrasov and M. G. Maslennikova,Light-Weight High-Temperature Porous-Aggregate Concretes [in Russian], Stroiizdat, Moscow (1982).Google Scholar
  17. 17.
    N. A. Popov,Process Factors of Concrete Strength [in Russian], ONTI, Moscow (1938).Google Scholar
  18. 18.
    K. P. Iotaugas, K. D. Nekrasov, and A. P. Tarasova,Stroit. Mater., No. 11, 11–13 (1973).Google Scholar
  19. 19.
    G. N. Khadzhishalapov,Effect of Calcining on Thermomechanical Properties of High-Temperature Sodium Silicate-Bonded Fireclay Concrete, Candidate's Thesis [in Russian], Moscow (1995).Google Scholar
  20. 20.
    A. A. Volyanskii, V. D. Glukhovskii, and V. V. Goncharov,Alkali and Alkali-Earth Hydraulic Cements and Concretes [in Russian], Vishcha Shkola, Kiev (1979).Google Scholar
  21. 21.
    L. G. Filatov, V. A. Reusov, L. A. Kuz'mina, et al. in:Abstracts of Papers, Conf. on Control of the Structure and Chemical Properties of Concretes [in Russian], Kharkov (1968), pp. 24–31.Google Scholar
  22. 22.
    V. Yu. Burov,High-Temperature Concretes for the Lining of the Sintering Zone in Rotary Cement Kilns, Doctoral Thesis [in Russian], Moscow (1994).Google Scholar
  23. 23.
    B. D. Toturbiev,Sodium Silicate-Based Building Materials [in Russian], Stroiizdat, Moscow (1988).Google Scholar
  24. 24.
    K. D. Nekrasov, in:Studies and Use of High-Temperature Concretes [in Russian], Stroiizdat, Moscow (1981), pp. 14–31.Google Scholar
  25. 25.
    A. P. Tarasova and A. A. Blyusin, in:High-Temperature Concretes [in Russian], Stroiizdat, Moscow (1964), pp. 139–157.Google Scholar
  26. 26.
    V. V. Zhukov and V. V. Peregudov, in:High-Temperature Concrete and Reinforced Concrete in Civil Engineering [in Russian], Stroiizdat, Moscow (1966), pp. 81–86.Google Scholar
  27. 27.
    A. P. Merkin, M. I. Zeifman, and B. D. Toturbiev,High-Temperature Concretes Based on Natural and Man-Made Glass Compositions [in Russian], Stroiizdat, Moscow (1986).Google Scholar
  28. 28.
    V. V. Zhukov,Fundamentals of the Strength of Concrete at Elevated Temperatures, Doctoral Thesis [in Russian], Moscow (1983).Google Scholar
  29. 29.
    M. A. Bezborodov,Chemical Durability of Silicate Glasses [in Russian], Nauka i Tekhnika, Minsk (1972).Google Scholar
  30. 30.
    N. P. Budnikov (ed.),New Ceramics [in Russian], Stroiizdat, Moscow (1969).Google Scholar
  31. 31.
    R. Iler,Chemistry of Silica, Wiley, New York (1979)Google Scholar
  32. 32.
    B. D. Deryagin,Theory of the Stability of Colloidal and Thin Films [in Russian], Nauka, Moscow (1986).Google Scholar
  33. 33.
    W. D. Kingery,An Introduction to Ceramics [Russian translation], 2nd ed. revised and enlarged, Stroiizdat, Moscow (1967).Google Scholar
  34. 34.
    A. P. Tarasova,High-Temperature Soluble-Glass Binders and Soluble-Glass-Bonded Concretes [in Russian], Stroiizdat, Moscow (1982).Google Scholar

Copyright information

© Plenum Publishing Corporation 1998

Authors and Affiliations

  • V. N. Sokov
    • 1
  1. 1.Moscow State University of Civil EngineeringMoscowRussia

Personalised recommendations