Use of undriven universal stands with a pass groove in the continous rolling of beams

V. K. Smirnov, V. A. Shilov, and Yu. V. Inatovich, Design of Rolling-Mill Rolls [in Russian], Metallurgiya, Moscow (1987).Google Scholar

A. A. Kurushin, V. N. Bespalov, Yu. O. Labetskii, et al., “Method for the continuous rolling of I-beams,” Inventor’s Certificate No. 966976 (USSR), Byull. Izobret., No. 7, 228 (1984).Google Scholar

A. I. Tselikov, V. I. Tomlenov, V. I. Zyuzin, et al., Theory of Rolling. Handbook [in Russian], Metallurgiya, Moscow (1982).Google Scholar

A. I. Tselikov and A. I. Grishkov, Theory of Rolling [in Russian], Metallurgiya, Moscow (1970).Google Scholar

V. N. Vydrin, A. S. Fedosienko, and V. I. Krainov, Continuous Rolling [in Russian], Metallurgiya, Moscow (1970).Google Scholar

V. M. Dan’ko and A. I. Gertsev, “Effect of back pressur on shaping of the front ends of blooms in vertical rolls,” Izv. Vyssh. Uchebn. Zaved., Chern. Metall, No. 1, 58–60 (1990).Google Scholar

A. P. Lokhmatov, S. M. Zhuchkov, and L. V. Kulakov, “Technology for the continuous rolling of steel sections with the use of undriven working stands,” Metall Lit’e Ukrainy, No. 9–10, 16–19 (1994).Google Scholar

A. P. Lokhmatov, S. M. Zhuchkov, and L. V. Kulakov, “Development of a technology and equipment for continuous section mills using undriven working stands.” Stal’. No. 5, 51–53 (1995).Google Scholar

S. M. Zhukov, A. P. Lokhmatov, and Yu. M. Beklemeshev, “Experimental studies of a technology for rolling beams with the use of undriven universal stands,” Chern. Metallurgiya—Byull. Inst. “Chermetinformatsiya,” No. 5, 27–30 (1992).Google Scholar

V. A. Teryaev, S. M. zhuchkov, and A. P. Lokhmatov, “Undriven universal stand for rolling beams,” ibid.,” No. 4, 53–55 (1990).Google Scholar