Recent trends in iron and steelmaking technology
- 144 Downloads
- 1 Citations
Abstract
Iron and steelmaking technology, including the preparation of raw materials and utilisation of wastes, has undergone marked changes over the last five decades. The hand mining of ores/minerals has almost completely been replaced by mechanised mining. The role of mineral beneficiation and sizing has therefore increased. The current emphasis is on maximising the use of mined materials through multiple beneficiation stages and agglomeration of fines.
Whilst emerging technologies for producing liquid iron are making their advent, blast furnaces continue to be the unchallenged source of hot metal production. However, the efficiency of ironmaking, both in terms of productivity and quality of hot metal has improved markedly.
Gone are the days of open hearth furnaces and Bessemer converters. LD steelmaking has incorporated in it a number of improvements, namely combined blowing, dynamic control along with the use of the sublance, improved refractories for lining and ladle treatment of liquid steel.
Trends emerging in the area of steel-casting include, horizontal casting, thin strip casting and hot charging of con-cast products without soaking/re-heating.
The paper deals with some of these areas including the advances in rolling mill operation.
Keywords
Ironmaking combined blowing continuous casting steel processing precarbonisationPreview
Unable to display preview. Download preview PDF.
References
- Athappan R and Thakur B 1987Trans. Indian Inst. Met. 40 55Google Scholar
- Cappel F 1985Proceedings of the Short Course on Sintering Technology, Jamshedpur, p.I.1Google Scholar
- Chattopadhyay R N, Singh B N and Mukherjee T 1984 Paper presented at the seminar on Recent Advances in the Processing of Metals, BangaloreGoogle Scholar
- De A, Singh B N, Chatterjee A and Mukherjee T 1985TISCO Tech. J. 40(3) 79Google Scholar
- De A, Singh B N, Mitra A N and Mukherjee T 1986Proceedings of International Symposium on Beneficiation and Agglomeration, Bhuwaneshwar, p. 263Google Scholar
- Nayar N K and Dutt N K 1984Proceedings of the short course on Continuous Casting of Steel, Jamshedpur, p. 76Google Scholar
- Nilles P 1981Proceedings of Int. Symp. on Modern Developments in Steelmaking, Jamshedpur, p. 395Google Scholar
- Ojha S K, Verma R K, Roy P K and Singh B N 1987 Paper presented at the Workshop on BF Instrumentation, JamshedpurGoogle Scholar
- Seetharama V Net al 1986Proc. Int. Conf. on Progress in Mater. Res. Fundamental and Applied Aspects, Kanpur p. 31Google Scholar
- Simon Pet al 1984Iron Steel Eng. p. 53Google Scholar
- Singh B N, De A, Rawat Y F, Das R C and Chatterjee A 1984Iron Steel Int. 57(4) 135Google Scholar
- Singh B N, Rao P U T, Poddar M N and Thakur C 1986TISCO Tech. J 31(4) 79Google Scholar
- Singh B N, Singh B K, Venugopal T, Mitra A N and Mukherjee T 1987 Presented at the First International Cokemaking Congress, Essen (W. Germany)Google Scholar
- Suzuki A 1975J. Jpn. Soc. Mech. Eng. 78 683Google Scholar
- Suzuki A 1984Trans. ISI Jpn. 24 228Google Scholar
- Wakabayashi S 1977Continuous casting of steel (The Metals Society) p. 209Google Scholar