An investigation into the failure of API 5L X-46 grade ERW linepipes
- 156 Downloads
The genesis of failure of 6.1 mm thick electric resistance welded (ERW) API 5L X-46 pipes during pretesting at a pressure equivalent to 90% of specified minimum yield strength (SMYS) was investigated. Cracks were found to initiate on the outer surface of the pipes in the fusion zone and propagate along the through-thickness direction. The presence of extensive decarburization and formation of a soft ferrite band within the fusion zone may have contributed to the nucleation of the cracks. Crack propagation was aided by the presence of exogenous inclusions entrapped within the fusion zone. Analysis of these inclusions confirmed the presence of Fe, Si, Ca, and O, indicating slag entrapment to be the most probable culprit.
Keywordselectric resistance welded fusion zone ferrite band API linepipes crack
Unable to display preview. Download preview PDF.
- 2.B.L. Jones and D.L. Johnson:Proc. Int. Conf. Steel for Linepipe and Pipeline Fittings, The Metals Society, London, 1981, pp. 14–21.Google Scholar
- 3.B.L. Jones, J.M. Gray, and H. Stuart:Proc. Int. Symp. for Testing and Failure Analysis, 1982, p. 336.Google Scholar
- 4.J.G. Williams, C.R. Killmore, P.D. Edwards, and P.G. Kelly:Int. Conf. Thermomechanical Processings of Steels and Other Materials, Thermec ’97, TMS, Australia, 1997, pp. 475–82.Google Scholar
- 5.V. Ramaswamy, R. Datta, S.K. Chaudhuri, and S. Mishra:Proc. Symp. Emerging Technologies for New Materials and Product Mix of the Steel Industry, ASM, Metals Park, OH, 1991, pp. 261–8.Google Scholar
- 6.S.K. Chaudhuri, Ramen Datta, A.K. De, and S. Mishra:Trans. India Institute of Metals, 1996,49(3), pp. 207–16.Google Scholar
- 7.Y.R. Cho and S.K. Chang:Proc. 1st European Conf. on Continuous Casting, Florence, Italy, 1991, pp. 2469–78.Google Scholar