Powder Metallurgy and Metal Ceramics

, Volume 37, Issue 11–12, pp 571–574 | Cite as

Finely dispersed composite iron—Silver powders

  • N. F. Kushchevskaya
  • T. M. Shvets
Theory, Production Technology, and Properties of Powders and Fibers
Received:
  • 36 Downloads

Abstract

A thermochemical method has been used to make finely dispersed iron-silver composite powders for medical purposes. The physicochemical and biomedical properties have been examined. These Fe’MAg powders have been made with silver mass contents of 0.1, 1, 5, and 10%, and they have been found to be resistant to corrosion, nonpyrophoric, and bactericidal, and to have hydrophilic surfaces and to allow of thermal sterilization; during the formation of the powders, the behavior can be traced from the magnetic characteristics can be controlled depending on subsequent use. The powders can be used in medicine for example for the treatment of suppurating wounds, trophic ulcers, and so on.

Keywords

Magnetic Characteristic Silver Content Silver Powder Iron Carbide Residual Induction 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
This is a preview of subscription content, log in to check access.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    E. M. Natanson,Colloidal Metals [in Russian], Nauk. Dumka, Kiev (1959).Google Scholar
  2. 2.
    A. T. Pilipenko and I. V. Pyatnitskii,Analytical Chemistry [in Russian], Khimiya, Moscow (1990).Google Scholar
  3. 3.
    N. S. Buyanova, G. B. Gudkova, and A. P. Karnaukhov, “Determining the specific surfaces of solids by argon thermal adsorption,”Kinetika i Kataliz,6, 1085–1092 (1965).Google Scholar
  4. 4.
    V. E. Polyakov, I. G. Polyakova, and Yu. I. Tarasevich, “Determining the heats of wetting for finely dispersed minerals having low specific surfaces,”Kolloid. Zh.,38, 188–191 (1976).Google Scholar
  5. 5.
    S. Gregg and K. Singh,Adsorption, Specific Surface, and Porosity [Russian translation], Mir, Moscow (1970).Google Scholar
  6. 6.
    L. I. Kheifets and A. V. Naimark,Multiphase Processes in Porous Media [in Russian], Khimiya, Moscow (1982), pp. 90–95.Google Scholar
  7. 7.
    Adsorption in Micropores [in Russian], Nauka, Moscow (1983), pp. 200–204.Google Scholar
  8. 8.
    G. B. Bokii,Crystallochemistry [in Russian], Nauka, Moscow (1971).Google Scholar
  9. 9.
    K. Bauminger, S. G. Cohen, A. Marinov, et al., “Study of the low-temperature transition in magnetite and the internal fields actions on iron nuclei in some spinel ferrites, using Mössbauer absorption,”Phys. Rev.,122, No. 5, 1447–1450 (1961).CrossRefGoogle Scholar
  10. 10.
    Yu. F. Krupyanskii and I. P. Suzdalev, “Size effects in small Fe3O4 particles,”Zh. Eksp. Teor. Fiz.,67, No. 2, 736–738 (1974).Google Scholar
  11. 11.
    T. Shinjo, F. Itoh, H. Takaki, et al., “Fe57 Mössbauer effect in Fe2B, FeB and Fe3C,”J. Phys. Soc. Jpn.,19, No. 7, 1252 (1964).CrossRefGoogle Scholar
  12. 12.
    W. Wendland,Thermal Analysis Methods [Russian translation], Mir, Moscow (1978).Google Scholar
  13. 13.
    S. M. Navashin and I. P. Fomina,Rational Antibiotic Treatment: A Handbook [in Russian], Meditsina, Moscow (1970).Google Scholar

Copyright information

© Kluwer Academic/Plenum Publishers 1999

Authors and Affiliations

  • N. F. Kushchevskaya
  • T. M. Shvets

There are no affiliations available

Personalised recommendations