Combustion, Explosion and Shock Waves

, Volume 34, Issue 2, pp 170–176 | Cite as

Characteristics of HMX combustion waves at various pressures and initial temperatures

  • A. A. Zenin
  • V. M. Puchkov
  • S. V. Finyakov
Article

Abstract

Temperature profiles and combustion-wave parameters are obtained experimentally for combustion of pressed HMX at room temperature and pressures of 1–500 atm and in the case of a change in the initial temperature of the specimens from −170 to +100°C at pressures of 1–75 (90) atm. The following combustion-zone parameters are determined: the heat effect in the c-phase, the heat transfer from the gas to the c-phase by thermal conduction and radiation, the rate of heat release in the gas near the surface, and the dimensions and temperature of the combustion zones. The authorsé previous conclusion that there is one process of decomposition and evaporation of HMX during its gasification in the condensed-phase reaction layer of the combustion wave is confirmed. Dependences of the fraction of decomposed HMX on the initial temperature of the specimens and the pressure are obtained. The differential characteristics of the combustion rate, surface temperature, and radiative heat transfer, required for the nonlinear theory of HMX combustion stability, are evaluated.

Keywords

Gasification Combustion Wave Burning Surface Solid Propellant Combustion Regime 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    T. L. Boggs, “The thermal behavior of cyclotrimethylenetrinitramine (RDX) and cyclotetramethylenetetranitramine (HMX)”, in: K. K. Kuo and M. Summerfield (eds.),Progress in Astronautics and Aeronautics, Vol. 90:Fundamentals of Solid-Propellant Combustion, Academic Press, New York (1984), pp. 121–175.Google Scholar
  2. 2.
    N. Kubota, “Flame structure of modern solid propellant”, in: L. De Luca, E. W. Price, and M. Summerfield (eds.),Progress in Astronautics and Aeronautics, Vol. 143:Nonsteady Burning and Combustion Stability of Solid Propellants, Ch. 7, AIAA, Washington, D.C. (1992), pp. 233–259.Google Scholar
  3. 3.
    M. W. Beckstead, “Modeling AN, AP, HMX, and double-base monopropellants”,26th JANNAF Combustion Meeting, Vol. 4, CPIA Pub. 526 (1989), pp. 255–268.Google Scholar
  4. 4.
    A. A. Zenin, “HMX and RDX: combustion mechanism and influence on modern double-base propellant combustion”,J. Propul. Power,2, No. 4, 752–758 (1995).CrossRefGoogle Scholar
  5. 5.
    A. A. Zenin, V. M. Puchkov, and S. V. Finyakov, “Combustion mechanism of nitramines as monopropellants and as additives to double-base propellants”, Aerotecnica Missile Spazio, 7, Nos. 3-4, Revista delléAssociazione Italiana di Aeronautica and Astronautica (1995).Google Scholar
  6. 6.
    V. M. Puchkov and A. A. Zenin, “Thermal structure of HMX steady combustion waves”, in:25th Symp. (Int.). on Combustion: Proc. of Work-in-Progress Posters. Combustion Inst. (1994), p. 326.Google Scholar
  7. 7.
    T. L. Boggs, C. F. Price, et al., “Temperature sensitivity of deflagration rate of HMX”,13th JANNAF Combustion Meeting (Dec. 1976), CPIA Pub. 281, pp. 45–56.Google Scholar
  8. 8.
    T. P. Parr, T. L. Boggs, C. F. Price, D. M. Hanson-Parr, “Measurement of the temperature sensitivity of HMX burning rates”, in:19th JANNAF Combustion Meeting (Oct. 1982), Vol. 1, CPIA Pub. 366, pp. 281–288.Google Scholar
  9. 9.
    A. A. Zenin, S. V. Finyakov, and V. M. Puchkov, “Cyclic nitramine combustion wave structures in a wide range of pressures”, in: 15th Colloq. (Int.) on the Dynamics of Explosions and React. Systems: Proc. Abst., Univ. of Colorado at Boulder (1995), p. 194.Google Scholar
  10. 10.
    A. A. Zenin, “An experimental study of the solid propellant combustion mechanism and combustion product flow”, Doct. Dissertation in Phys.-Math. Sci., Moscow (1976).Google Scholar
  11. 11.
    S. V. Finyakov, “Powder combustion mechanism with blowing of the burning surface”, Candidateés Dissertation in Phys.-Math. Sci., Moscow (1992).Google Scholar
  12. 12.
    A. A. Zenin, “On the heat exchange of microthermo-couples in the combustion of condensed substances”,Prikl. Mekh. Tekh. Fiz., No. 5, 125–131 (1963).Google Scholar
  13. 13.
    O. I. Leipunskii, A. A. Zenin, and V. M. Puchkov, “Influence of catalysts on the combustion-zone characteristics of condensed substances”, inCombustion and Explosion: Third All-Union Symp. on Combustion and Explosion [in Russian], Nauka, Mosocw, (1972), pp. 74–77.Google Scholar
  14. 14.
    A. A. Zenin, “Structure of the temperature distribution in steady combustion of double-base powder”,Fiz. Goreniya Vzryva,2, No. 3, 67–76 (1966).Google Scholar
  15. 15.
    A. A. Zenin, “Thermophysics of stable combustion waves of solid propellants”, in: L. De Luca, E. W. Price, and M. Summerfield (eds),Progress in Astronautics and Aeronautics, Vol. 143:Nonsteady Burning and Combustion Stability of Solid Propellants, Ch. 6, AIAA, Washington, D.C. (1992), pp. 197–231.Google Scholar
  16. 16.
    A. A. Zenin, V. M. Puchkov, S. V. Finjakov, and G. P. Kusnezsov, “Burning-wave parameters and nitramine combustion mechanism”,26th Symp. (Int.) on Combustion: Proc. of Accepted Papers, The Combustion Inst. (1996).Google Scholar
  17. 17.
    S. V. Mishchenko, I. A. Cherepennikov, and S. N. Kuzémin,Calculation of Thermal Properties of Substances [in Russian], Izd. Voronezh. Univ., Voronezh (1991), p. 89.Google Scholar
  18. 18.
    B. V. Novozhilov, M. Kohno, H. Maruizurni, and T. Shimada, “Solid propellant burning rate response functions of higher orders”, in: Report No. 661, The Institute of Space and Astronautical Science, Kanagawa (1996).Google Scholar

Copyright information

© Plenum Publishing Corporation 1998

Authors and Affiliations

  • A. A. Zenin
    • 1
  • V. M. Puchkov
    • 1
  • S. V. Finyakov
    • 1
  1. 1.Semenov Institute of Chemical PhysicsRussian Academy of SciencesMoscow

Personalised recommendations