Metallurgical Transactions A

, Volume 21, Issue 11, pp 2985–3000 | Cite as

Development of ferrite rolling textures in low- and extra low-carbon steels

  • L. S. Tóth
  • J. J. Jonas
  • D. Daniel
  • R. K. Ray
Mechanical Behaviour
Received:

Abstract

The texture changes that affect the main ideal orientations displayed by rolled low-and extra low-carbon steels are examined. Predictions are made regarding the stability of these components using a rate-dependent theory for mixed 112 (111) and 110 (111) slip. Both full constraint (Taylor) and relaxed constraint (lath and pancake) grain interaction models are employed. It is shown that the experimentally observed texture changes can be reproduced by adopting the deformation modes which require the least plastic work. The orientation dependences of the preferred deformation modes are described together with the relative stabilities of the expected end textures.

Keywords

Metallurgical Transaction Deformation Mode Plastic Work Critical Resolve Shear Stress Ideal Orientation 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
This is a preview of subscription content, log in to check access.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    H. Inagaki and T. Suda:Texture, 1972, vol. 1, pp. 129–40.CrossRefGoogle Scholar
  2. 2.
    I.L. Dillamore and H. Katoh:Met. Sci., 1974, vol. 8, pp. 21–27.Google Scholar
  3. 3.
    C. Därmann, S. Mishra, and K. Lücke:Proc. 7th Int. Conf. on Textures of Materials (ICOTOM7), CM. Brakman, ed., Noordwijkerhaut, The Netherlands, Sept. 17–21, 1985, pp. 47–51.Google Scholar
  4. 4.
    H. Inagaki:Trans. Iron Steel Inst. Jpn., 1984, vol. 24, pp. 266–74.Google Scholar
  5. 5.
    J.L. Raphanel and P. Van Houtte:Acta Metall., 1985, vol. 33, pp. 1481–88.CrossRefGoogle Scholar
  6. 6.
    U. von Schlippenbach, F. Emren, and K. Lücke:Acta Metall., 1986, vol. 34, pp. 1289–1301.CrossRefGoogle Scholar
  7. 7.
    M. Arminjon:Acta Metall., 1987, vol. 35, pp. 615–30.CrossRefGoogle Scholar
  8. 8.
    P. Gilormini:Acta Metall., 1989, vol. 37, pp. 2093–2101.CrossRefGoogle Scholar
  9. 9.
    L. Scidal, M. Hölscher, and K. Lücke:Textures Microstruct., 1989, vol. 11, pp. 171–85.Google Scholar
  10. 10.
    R.K. Ray and J.J. Jonas:Int. Mater. Rev., 1990, vol. 35, pp. 1–36.Google Scholar
  11. 11.
    D. Daniel and J.J. Jonas:Metall. Trans. A, 1990, vol. 21 A, pp. 331–43.Google Scholar
  12. 12.
    P.K. Koh and CG. Dunn:AIME Trans., 1955, vol. 203, p. 401.Google Scholar
  13. 13.
    J.W. Hutchinson:Proc. R. Soc. London A, 1976, vol.348, pp. 101–27.Google Scholar
  14. 14.
    J. Pan and J.R. Rice:Int. J. Solids Struct., 1983, vol. 19, pp. 973–87.CrossRefGoogle Scholar
  15. 15.
    S. Nemat-Nasser and M. Obata:Proc. R. Soc. London A, 1986, vol. 407, p. 343.CrossRefGoogle Scholar
  16. 16.
    G.R. Canova, C. Fressengeas, C. Molinari, and U.F. Kocks:Acta Metall., 1988, vol. 36, pp. 1961–70.CrossRefGoogle Scholar
  17. 17.
    L.S. Toth, P. Gilormini, and J.J. Jonas:Acta Metall., 1988, vol. 36, pp. 3077–91.CrossRefGoogle Scholar
  18. 18.
    L.S. Tóth, K.W. Neale, and J.J. Jonas:Acta Metall., 1989, vol. 37, pp. 2197–2210.CrossRefGoogle Scholar
  19. 19.
    L.S. Tóth, J.J. Jonas, and K.W. Neale:Proc. R. Soc. London A, 1990, vol. A427, pp. 201–19.Google Scholar
  20. 20.
    G.Y. Chin:Metall. Trans., 1972, vol. 3, pp. 2213–16.Google Scholar
  21. 21.
    D. Daniel: Ph.D. Thesis, McGill University, Montreal, PQ, Canada, 1990.Google Scholar
  22. 22.
    M. Renouard and M. Wintenberger:C. R. Acad. Sci. Paris, 1981, vol. B292, p. 385.Google Scholar
  23. 23.
    B. Bacroix, J.J. Jonas, F. Montheillet, and A. Skalli:Acta Metall., 1986, vol. 34, pp. 937–50.CrossRefGoogle Scholar
  24. 24.
    A. Skalli, R. Fortunier, R. Fillit, and J.H. Driver:Acta Metall., 1985, vol. 33, pp. 997–1007.CrossRefGoogle Scholar
  25. 25.
    G. Langford and M. Cohen:Trans. ASM, 1969, vol. 62, p. 623.Google Scholar
  26. 26.
    H. Honneff and H. Mecking:Proc. 5th Int. Conf. on Textures of Materials (ICOTOM5), G. Gottstein and K. Lücke, eds., Aachen, Federal Republic of Germany, Mar. 28-31, 1978, p. 265.Google Scholar
  27. 27.
    A. Clémentand P. Coulomb:Scripta Metall., 1979, vol. 13,p. 899.CrossRefGoogle Scholar
  28. 28.
    R.E. Hook, Alan J. Heckler, and James A. Elias:Metall. Trans. A, 1975, vol. 6A, pp. 1683–92.Google Scholar

Copyright information

© The Metallurgical of Society of AIME 1990

Authors and Affiliations

  • L. S. Tóth
    • 1
  • J. J. Jonas
    • 2
  • D. Daniel
    • 2
  • R. K. Ray
    • 2
  1. 1.Institute for General PhysicsEötvös UniversityBudapestHungary
  2. 2.Department of Metallurgical EngineeringIndian Institute of Technology KanpurKanpurIndia

Personalised recommendations