Advertisement

Metallurgical Transactions A

, Volume 12, Issue 9, pp 1631–1645 | Cite as

The influence of coherency strain on the elevated temperature tensile behavior of Ni-15Cr-AI-Ti-Mo alloys

  • D. A. Grose
  • G. S. Ansell
Mechanical Behavior

Abstract

The effect of coherency strain on elevated temperature tensile strength was examined in a model, two-phase y’-strengthened Ni-15Cr-Al-Ti-Mo alloy series. The temperature dependence of coherency strain as represented by the γ-γ’ mismatch was determined over the temperature range 25 to 800 °C. The flow stress increment γ, due to precipitation of γ’, was found to correlate well to the magnitude of the γ-γ’ mismatch over the same temperature interval. The correlation was strongest for high misfit alloys regardless of the Antiphase Boundary Energy (APBE). The predominance of by-pass type dislocation-particle interactions in high coherency alloys confirms that strengthening is primarily due to coherency strains. Conversely, alloys with low misfit exhibit two distinct particle shear mechanisms believed to be dependent upon the relative APBE and matrix stacking fault energy of the alloy.

Keywords

Metallurgical Transaction Flow Stress Stack Fault Energy Antiphase Boundary Coherency Strain 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    G. R. Stoeckinger and J. P. Neumann:J. Appl. Cryst., 1970, vol. 3, p. 32.CrossRefGoogle Scholar
  2. 2.
    Rolf Nordheim and Nicholas J. Grant:Trans. AIME, 1954, vol. 20, p. 211.Google Scholar
  3. 3.
    J. R. Mihalisin and R. F. Decker:Trans. TMS-AIME, 1960, vol. 218, p. 507.Google Scholar
  4. 4.
    R. F. Decker and J. R. Mihalisin:Trans. ASM, 1969, vol. 62, p. 481.Google Scholar
  5. 5.
    I. I. Mirkin and O. D. Kancheev:Met. Sci. Heat Treat., 1967, nos. 1 and 2, p. 10.Google Scholar
  6. 6.
    G. N. Maniar and J. E. Bridge:Metall. Trans., 1971, vol. 2, p. 95.Google Scholar
  7. 7.
    L. B. Pfeil, H. P. Allen, and C. G. Conway: Spec. Rept. No. 43, Iron Steel Inst., London, 1951.Google Scholar
  8. 8.
    R. F. Miller and G. S. Ansell:Metall. Trans. A, 1977, vol. 8A, p. 1979.Google Scholar
  9. 9.
    D. Raynor and J. M. Silcock:Met. Sci. J., 1970, vol. 4, p. 121.Google Scholar
  10. 10.
    L. M. Brown and R. K. Ham:Strengthening Methods in Crystals, A. Kelly and R. B. Nicholson, eds., p. 62, Applied Science Publ. Ltd., 1971.Google Scholar
  11. 11.
    N. S. Stoloff :The Superalloys, C. Sims and W. C. Hagel, eds., p. 79, Wiley, 1972.Google Scholar
  12. 12.
    V. A. Phillips:Scr. Metall, 1968, vol. 2, p. 147.CrossRefGoogle Scholar
  13. 13.
    J. M. Oblak, D. F. Paulonis, and D. S. Duvall:Metall. Trans., 1974, vol. 5, p. 143.Google Scholar
  14. 14.
    V. Munjal and A. J. Ardell:Acta Metall., 1975, vol. 23, p. 513.CrossRefGoogle Scholar
  15. 15.
    A. J. Ardell, V. Munjal, and D. J. Chellman:Metall. Trans. A, 1976, vol. 7A, p. 1263.Google Scholar
  16. 16.
    J. W. Goodrum and B. G. Lefevre:Metall. Trans. A., 1977, vol. 8A, p. 939.Google Scholar
  17. 17.
    W. T. Loomis, J. W. Freeman, and D. L. Sponseller:Metall. Trans., 1972, vol. 3, p. 989.Google Scholar
  18. 18.
    H. Morrow, D. L. Sponseller, and M. Semchyshen:Metall. Trans. A, 1975, vol. 6A, p. 477.Google Scholar
  19. 19.
    O. H. Kriege and J. M. Baris:Trans. ASM, 1969, vol. 62, p. 195.Google Scholar
  20. 20.
    O. H. Kriege and C. P. Sullivan:Trans. ASM, 1968, vol. 61, p. 278.Google Scholar
  21. 21.
    R. F. Miller: Ph.D. Thesis, Rensselaer Polytechnic Institute, Troy, NY, 1977.Google Scholar
  22. 22.
    M. J. Donachie and O. H. Kriege:J. Mater., 1972, vol. 7, p. 269.Google Scholar
  23. 23.
    B. D. Cullity:Elements of X-Ray Diffraction, p. 324, Addison-Wesley Pub. Co., 1967.Google Scholar
  24. 24.
    R. D. Simmons and R. W. Balluffi:Phys. Rev., 1962, vol. 125, p. 862.CrossRefGoogle Scholar
  25. 25.
    W. D. Pearson:Lattice Spacing and Structure of Metals and Alloys, Pergamon Press, 1958.Google Scholar
  26. 26.
    M. W. Broadley: M.S. Thesis, Rensselaer Polytechnic Institute, Troy, NY, 1979.Google Scholar
  27. 27.
    C. Zwikker:Physical Properties of Solid Materials, p. 159, Interscience, 1954.Google Scholar
  28. 28.
    M. P. Arbuzov and I. A. Zelenkov:Phys. Met. Metall., 1963, vol. 16, p. 65.Google Scholar
  29. 29.
    G. R. Woolhouse and L. M. Brown:J. Inst. Met., 1970, vol. 98, p. 106.Google Scholar
  30. 30.
    G. N. Maniar, J. E. Bridge, H. M. James, and G. B. Heydt:Metall. Trans., 1970, vol. 1, p. 31.Google Scholar
  31. 31.
    R. O. Williams:Trans. TMS-AIME, 1959, vol. 215, p. 1026.Google Scholar
  32. 32.
    V. A. Phillips:Philos. Mag., 1967, vol. 16, p. 103.Google Scholar
  33. 33.
    A. Taylor and R. W. Floyd:J. Inst. Met., 1952-1953, vol. 81, p. 25.Google Scholar
  34. 34.
    R. G. Davies and N. S. Stoloff:Trans. TMS-AIME, 1965, vol. 233, p. 714.Google Scholar
  35. 35.
    H. Gleiter and E. Hornbogen:Phys. Status Solidi, 1965, vol. 12, p. 235.Google Scholar
  36. 36.
    M. J. Marcinkowski, N. Brown, and R. M. Fisher:Acta Metall., 1961, vol. 9, p. 129.CrossRefGoogle Scholar
  37. 37.
    D. G. Morris and R. E. Smallman:Acta Metall., 1975, vol. 23, p. 73.CrossRefGoogle Scholar
  38. 38.
    L. R. Cornwell, G. R. Purdy, and J. D. Embury:Phys. Status Solidi, 1969, vol. 35, p. Kl.Google Scholar
  39. 39.
    L. Delehouzee and A. Deruyhere:Acta Metall., 1967, vol. 15, p. 727.CrossRefGoogle Scholar
  40. 40.
    B. E. P. Beeston, I. L. Dillamore, and R. E. Smallman:Met. Sci. J., 1968, vol. 2, p. 12.CrossRefGoogle Scholar
  41. 41.
    B. E. P. Beeston and L. K. France:J. Inst. Met., 1968, vol. 96, p. 105.Google Scholar
  42. 42.
    B. H. Kear and J. M. Oblak:J. Phys., Colloq. C7, 1974, vol. 35, suppl. no. 12, pp. C7–35.Google Scholar
  43. 43.
    S. M. Copley and B. H. Kear:Trans. TMS-AIME, 1967, vol. 239, p. 984.Google Scholar
  44. 44.
    B. H. Kear, A. F. Giamei, J. M. Silcock, and R. K. Ham:Scr. Metall., 1968, vol. 2, p. 287.CrossRefGoogle Scholar
  45. 45.
    B. A. Parker:Scr. Metall., 1970, vol. 4, p. 905.CrossRefGoogle Scholar

Copyright information

© American Society for Metals and the Metallurgical Society of AIME 1981

Authors and Affiliations

  • D. A. Grose
    • 1
  • G. S. Ansell
    • 2
  1. 1.Thin Films Dept.IBM CorporationHopewell Junction
  2. 2.Rensselaer Polytechnic InstituteTroy

Personalised recommendations