Advertisement

Metallurgical Transactions

, Volume 3, Issue 6, pp 1627–1631 | Cite as

Elastic and plastic anisotropy in sheets of cubic metals

  • G. J. Davies
  • D. J. Goodwill
  • J. S. Kallend
Mechanical Behavior

Abstract

Methods are described for the calculation of the elastic and plastic properties of textured polycrystalline metals. The calculations involve the crystallite orientation distribution function derived from X-ray texture data together with data which describe the single crystal behavior. Subsequently, it is shown how a knowledge of the elastic properties can be used to make an analytical prediction of the plastic properties. In making this prediction use is made of the fact that for cubic metals both the elastic and plastic properties are influenced predominantly through the zeroth and fourth order coefficients of the crystallite distribution function. The methods are illustrated by application to the analysis of the data of Stickels and Mould. The statistical correlation they observed is shown to have a justifiable analytical basis.

Keywords

Angular Variation Metallurgical Transaction Volume Strain Ratio Plastic Property Plastic Anisotropy 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    C. A. Stickels and P. R. Mould:Met. Trans., 1970, vol. 1, p. 1303.Google Scholar
  2. 2.
    R. J. Roe:J. Appl. Phys., 1965, vol. 36, p. 2024.CrossRefGoogle Scholar
  3. 3.
    H. J. Bunge:Z. Metallk., 1965, vol. 56, p. 872.Google Scholar
  4. 4.
    P. R. Morris and A. J. Heckler:Advances in X-ray Analysis, vol. 11, p. 454, Plenum Press, New York, 1968.Google Scholar
  5. 5.
    E. Schmid and W. Boas:Plasticity of Crystals, p. 193, Hughes and Co., London, 1950.Google Scholar
  6. 6.
    H. Pursey and H. L. Cox:Phil. Mag., 1954, vol. 45, p. 295.Google Scholar
  7. 7.
    H. L. Bunge:Mbr. Dt. Akad. Wissen, 1960, vol. 2, p. 479.Google Scholar
  8. 8.
    W. Voigt:Lehrbuch der Kristallphysik, B. G. Tuebner Verlag, Leipzig, 1929.Google Scholar
  9. 9.
    A. Reuss:Z. Angew. Math. Mech, 1929, vol. 9, p. 49.CrossRefGoogle Scholar
  10. 10.
    R. Hill:Proc. Phys. Soc., 1952, vol. A65, p. 349.Google Scholar
  11. 11.
    J. F. Nye:Physical Properties of Crystals, p. 144, Clarendon Press, Oxford, 1957.Google Scholar
  12. 12.
    H. J. Bunge:Krist. Tech., 1968, vol. 3, p. 431.Google Scholar
  13. 13.
    H. J. Bunge, R. Ebert, and F. Günther:Phys. Status Solidi, 1969, vol. 31, p. 565.Google Scholar
  14. 14.
    H. J. Bunge and W. T. Roberts:J. Appl. Cryst., 1969, vol. 2, p. 116.CrossRefGoogle Scholar
  15. 15.
    J. S. Kallend and G. J. Davies:J. Inst. Metals, 1970, vol. 98, p. 242.Google Scholar
  16. 16.
    J. S. Kallend and G. J. Davies:J. Inst. Metals, 1971, vol. 99, p. 257.Google Scholar
  17. 17.
    J. D. Eshelby:Proc. Roy. Soc., 1957, vol. A241, p. 376.Google Scholar
  18. 18.
    E. Kroner:Z. Phys., 1958, vol. 151, p. 504.CrossRefGoogle Scholar
  19. 19.
    R. Hill:J. Mech. Phys. Solids, 1965, vol. 13, p. 89.CrossRefGoogle Scholar
  20. 20.
    G. Kneer:Phys. Status Solidi, 1965, vol. 9, p. 825.Google Scholar
  21. 21.
    P. R. Morris:Int. J. Eng. Sci., 1970, vol. 8, p. 49.CrossRefGoogle Scholar
  22. 22.
    G. Sachs:Z. Deut. Ing., 1928, vol. 72, p. 734.Google Scholar
  23. 23.
    G. I. Taylor:J. Inst. Metals, 1938, vol. 62, p. 307.Google Scholar
  24. 24.
    G. I. Taylor:Proc. of the Colloquium on the Deformation and Flow of Solids, 1955, p. 3, Springer-Verlag, Berlin.Google Scholar
  25. 25.
    J. F. W. Bishop and R. Hill:Phil. Mag., 1951, vol. 42, p. 414.Google Scholar
  26. 26.
    J. F. W. Bishop and R. Hill:Phil. Mag., 1951, vol. 42, p. 1298.Google Scholar
  27. 27.
    U. F. Kocks:Met. Trans., 1970, vol. 1, p. 1121.Google Scholar
  28. 28.
    H. R. Piehler and W. A. Backofen:Met. Trans., 1971, vol. 2, p. 249.Google Scholar
  29. 29.
    J. M. Rosenberg and H. R. Piehler:Met. Trans., 1971, vol. 2, p. 257.Google Scholar
  30. 30.
    I.L.Dillamore and W. T. Roberts:Acta Met., 1964, vol. 12, p. 281.CrossRefGoogle Scholar
  31. 31.
    T. E. Mitchell:Phil. Mag., 1968, vol. 17, p. 1169.Google Scholar
  32. 32.
    W. Hosford and W. A. Backofen:Fundamentals of Deformation Processing, 9th Sagamore Conf., A.M.R.A., p. 259, Syracuse Univ. Press, New York, 1964.Google Scholar
  33. 33.
    L. Bourne and R. Hill:Phil. Mag., 1950, vol. 41, p. 671.Google Scholar
  34. 34.
    G. A. Alers and Y. C. Liu:Trans. TMS-AIME, 1966, vol. 236, p. 482.Google Scholar
  35. 35.
    D. S. Hoddinott and G. J. Davies:J. Inst. Metals, 1969, vol. 97, p. 155.Google Scholar
  36. 36.
    R. Maddin and N. K. Chen:Progr. Metal Phys., 1954, vol. 5, p. 53.CrossRefGoogle Scholar

Copyright information

© The Metallurgical of Society of AIME 1972

Authors and Affiliations

  • G. J. Davies
    • 1
  • D. J. Goodwill
    • 1
  • J. S. Kallend
    • 1
  1. 1.Department of Metallurgy and Materials ScienceUniversity of CambridgeCambridgeEngland

Personalised recommendations