Advertisement

A proposed weathering classification for basalts and their engineering properties (Turkey)

  • Tuğrul A. 
  • Gürpinar O. 
Article

Abstract

Most of the volcanic rocks widespread in Turkey are basalt. The effect of weathering processes on the physical and mechanical properties of this type of rock is important. To assess these properties and relations to each other, a study was undertaken in the Niksar region. A detailed investigation was carried out on basalts in the road cuttings of the Niksar ring road and Ünye-Akkuş-Niksar highway alignments.

A new classification system for basaltic rocks which are substantially influenced by weathering is proposed. The basic engineering properties of the basalt representing each weathering grade were determined. The properties tested are dry density, porosity, coefficient of permeability, uniaxial compressive strength, tensile strength and Young’s modulus. Interrelationships were determined for all test results. It is concluded that there is a substantial degradation in the engineering properties of the rock beyond a specific degree of weathering.

Keywords

Olivine Rock Mass Uniaxial Compressive Strength Residual Soil Basaltic Rock 

Proposition d’une classification de l’altération des basaltes et étude de leurs propriétés géotechniques (Turquie)

Résumé

La majorité des roches volcaniques en Turquie sont des basaltes. L’altération contrôle les propriétés physiques et mécaniques de ces roches. Nous avons choisi la série basaltique de l’Eocène a Niksar et nous avons étudié ses caractéristiques d’altération. La zone d’étude se situe sur la route périphérique de Niksar et sur la route nationale Ünye-Akkus,-Niksar.

Le but de ce travail est d’utiliser une classification d’altération des basaltes et de déterminer leurs propriétés géotechniques : densité, porosité, perméabilité, résistance en compression, résistance à la traction et module de Young. Les études ont montré qu’il y a des différences marquantes entre les degrés d’altération et qu’elles sont proportionnelles.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. ANON, 1977 : The description of rock masses for engineering purposes, Working Party Report, Quarterly Journal of Engineering Geology, No. 10, 355–388.Google Scholar
  2. ANON, 1990 : Tropical residual soils, Geological Society Engineering Group Working Party Report, Quarterly Journal of Engineering Geology, Vol. 23, No. 1.Google Scholar
  3. BLACKWELDER E., 1925: Exfoliation as a phase of rock weathering, Journal of Geology, Vol. 33, No. 8, 793–806.CrossRefGoogle Scholar
  4. BRANNER J.C., 1896: Decomposition of rocks in Brazil, Bull. Geol. Soc. Amer., Vol. 7, 255–314.CrossRefGoogle Scholar
  5. BROCK R.W., 1943: Weathering of igneous rocks near Hong Kong, Bull. Geol. Geol. Soc. Amer., Vol. 54, 717–738.CrossRefGoogle Scholar
  6. DEARMAN W.R., 1974 : Weathering classification in the characterisation of rock for engineering purposes in British Practice, Bull. Int. Ass. Eng. Geol., No. 9, 33–42.Google Scholar
  7. DEARMAN W.R., BAYNES F.J., IRFAN T.Y., 1978: Engineering grading of weathered granite, Engineering Geology, Vol. 12, 345–374.CrossRefGoogle Scholar
  8. DEERE D.U., PATTON F.D., 1971 : Slope stability in residual soild, Reprinted From Proceedings of The Fourth Panamerican Conference on Soil Mechanics and Foundation Engineering, San Juan, Puerto Rico.Google Scholar
  9. DERBY O.A., 1896: Decomposition of rocks in Brazil, Jour. Geol., Vol. 4, No. 5, 529–540.CrossRefGoogle Scholar
  10. GHAFOORI M., MASTROPASQUA M., CARTER J.P., AIREY D.W., 1993 : Engineering properties of ashfield shale, Australia, Bulletin of the International Association of Engineering Geology, No. 48, 43–58.CrossRefGoogle Scholar
  11. ISRM, 1981: Rock Characterization, Testing and Monitoring, ISRM Suggested Methods, Pergamon Press, Oxford, Brown, E.T. (ed), 211 pp.Google Scholar
  12. IRFAN T.Y., DEARMAN W.R., 1978: The engineering petrography of a weathered granite in Cornwall, England, Q.J. Eng. Geol., Vol. 11, 233–244.CrossRefGoogle Scholar
  13. KOMOO I., YAAKUB J., 1990 : Engineering properties of weathered metamorphic rocks in Peninsular Malaysia, 6th International IAEG Congress, Balkema, Rotterdam, 665–672.Google Scholar
  14. LITTLE A.L., 1969: The engineering classification of residual tropical soils, Proc. 7th Int. Conf. Soil Mech. and Found. Engr., Mexico, Vol. I, 1–10.Google Scholar
  15. LUMB P., 1983: Engineering properties of fresh and decomposed igneous rocks from Hong Kong, Engineering Geology, Vol. 19, 81–94.CrossRefGoogle Scholar
  16. TUĞRUL A., 1995: The Effects of Weathering on The Engineering Properties of Basalts in The Niksar Region, Unpublished Ph.D. Thesis, Department of Geological Engineering, Istanbul University, Istanbul, Turkey, 168 p. (in Turkish).Google Scholar
  17. VARGAS M., SILVA F.P., TUBIO M., 1965: Residual clay dams in the State of Sao Paulo, Brazil, Proc. 6th Int. Conf., Soil Mech. and Found. Engr., Montreal, Vol. II, 578–582.Google Scholar
  18. WILLIAMSON D.A., KUHN C.R., 1988 : The unified rock classification system. In Kirkaldie L. (Ed.); Rock Classification Systems for Engineering Purposes. American Society for Testing Materials, STP 984, 7–16.Google Scholar

Copyright information

© International Assocaition of Engineering eology 1997

Authors and Affiliations

  • Tuğrul A. 
    • 1
  • Gürpinar O. 
    • 1
  1. 1.Geological Eng. Dept., Faculty of Eng.Istanbul UniversityIstanbulTurkey

Personalised recommendations