Die Bruchzähigkeit von Fichte und ihre wesentlichen Einflußparameter
- 40 Downloads
- 5 Citations
Zusammenfassung
Biegeträger mit rechtwinkligen Ausklinkungen und/oder Durchbrüchen sind durch eine hohe Kerbbeanspruchung in den einspringenden Ecken bzw. Kerben gekennzeichnet. Zur Beurteilung der Tragfähigkeit auf Basis desK-Konzeptes ist außer der Bruchzähigkeit im Mode-1 (Querzug) die Kenntnis der Bruchzähigkeit im Mode-2 (Schub) erforderlich. Unter Verwendung der Balkenprobe wird die Bruchzähigkeit von Fichte im Mode-2 bestimmt, wobei als wesentliche Einflußparameter die Rohdichte und die Lage der Jahrringe in der Kerbe zu nennen sind.
The fracture toughness of spruce and the essential influences
Abstract
The characteristic of beams with rectangular blockouts and breakthroughs is the high stress state in the sharp notches. To estimate the bearing capacity based on theK-concept the knowledge of the fracture toughness for mode-1 (tension transverse to the grain) and for mode-2 (shear) is necessary. The fracture toughness of spruce in the mode-2 is determined by using the beam-specimen. The essential influences are the density and the orientation of the annual rings in the notch.
Preview
Unable to display preview. Download preview PDF.
Literatur
- ASTM, 1983: Standard test method for plane-strain fracture toughness of metallic materials. Designation E399, PhiladelphiaGoogle Scholar
- Barrett, J. D., Foschi, R. O. 1977: Mode-2 stress-intensity factors for cracked wood beams. Engineering Fracture Mechanics 9: 371–378CrossRefGoogle Scholar
- Keenan, F. J., Jaeger, T. A. 1978: Effect of transverse stress on the shear strength and failure mechanism of douglas-fir. Proceedings of the Intern. Conference on Wood Fracture. Banff AlbertaGoogle Scholar
- Leicester, R. H. 1974: Fracture strength of wood. First Australian Conference on Engineering Materials University of New South Wales AustraliaGoogle Scholar
- Logemann, M. 1991: Die Bruchzähigkeit von Fichte und ihre wesentlichen Einflußparameter Untersuchungen im Mode-1. Holz als Roh- und Werkstoff 47–52Google Scholar
- Petterson, R. W., Bodig, J. 1981. Predictions of fracture toughness of conifers. Wood and Fiber Science 15: 302–316Google Scholar
- Sih, G. C. 1974: Strain-energy-density factor applied to mixed-mode crack problems. International Journal of Fracture 10: 305–321CrossRefGoogle Scholar
- Spengler, R. 1982: Festigkeitsverhalten von Brettschichtholz unter zweiachsiger Beanspruchung. Berichte zur Zuverlässigkeitstheorie der Bauwerke 62. LKI MünchenGoogle Scholar
- Wu, E. M. 1963: Application of fracture mechanics to orthotrophic plates. T & AM Report 248. Urbana IllinousGoogle Scholar
- Wu, E. M. 1974: Strength and fracture of composites. Composite Materials. Nr. 5 New York: Broutmann, L. J., Kroch, R. H.Google Scholar