Advertisement

Metal Science and Heat Treatment

, Volume 40, Issue 7, pp 261–265 | Cite as

New possibilities of gas nitriding as a method for anticorrosion treatment of machine parts

  • V. M. Zinchenko
  • V. Ya. Syropyatov
Chemicothermal Treatment

Abstract

A solution of the problem of raising the corrosion resistance of machine parts to the level of modern industrial requirements with the use of gas nitriding is suggested. The results of a study of the phase composition of a surface nitrided layer of steel make it possible to explain the nature of the growth of its corrosion resistance.

Keywords

Corrosion Resistance Corrosion Test Nitrided Layer Steel 40Kh Furnace Atmosphere 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    A. N. Minkevich, N. M. Pisarev, and A. G. Solodikhin,Nitriding as a Method for Protecting Steel from Corrosion [in Russian], Gosplan SSSR, Inst. Tekh.-Econom. Inform., Moscow (1941).Google Scholar
  2. 2.
    A. V. Ryabchenkov and V. D. Yakhinina, “Anticorrosion nitriding,” in:Corrosion, Corrosion Protection and Electrolysis. Coll. Works. No. 11 [in Russian], TsNIITMASh, Moscow (1948).Google Scholar
  3. 3.
    V. D. Kal'ner, S. A. Yurasov, V. K. Sedunov, and Yu. K. Evseev, “Structure and properties of oxidized carbonitride coats,”Metalloved. Term. Obrab. Met., No. 3, 54–58 (1990).Google Scholar
  4. 4.
    M. Nahlovska and S. P. Ul'rikh, “Carbonitriding by the method of TENIFER QPQ used for attaining a high corrosion resistance,” in:Rep. 16th Conf. on Heat Treatment. Heat Treatment Association of Czech and Slovak Republics, Ecozond, Brno (1996), pp. 137–143.Google Scholar
  5. 5.
    V. M. Zinchenko, V. Ya. Syropyatov, O. N. Safonova, and V. V. Barelko, “New in gas nitriding,” in:Rep. 16th Conf. on Heat Treatment, Heat Treatment Association of Czech and Slovak Republics, Ecozond, Brno (1996), pp. 145–150.Google Scholar
  6. 6.
    V. M. Zinchenko, V. Ya. Syropyatov, V. V. Barelko, and L. A. Bykov, “Gas nitriding in a catalytically prepared ammonia media,”Metalloved. Term. Obrab. Met., No. 7, 7–11 (1997).Google Scholar
  7. 7.
    R. Chattergy-Fisher, F.-V. Eisel, and R. Hoffman,Nitriding and Carbonitriding [Russian translation], Metallurgiya, Moscow (1990).Google Scholar

Copyright information

© Plenum Publishing Corporation 1999

Authors and Affiliations

  • V. M. Zinchenko
    • 1
  • V. Ya. Syropyatov
    • 1
  1. 1.NII Iavtoprom Joint-Stock CompanyRussia

Personalised recommendations