Determination of fracture toughness and fracture energy of brittle materials under impact wedging

V. Z. Parton and V. G. Boriskovskii,Dynamic Fracture Mechanics [in Russian], Mashinostroenie, Moscow (1985).Google Scholar

V. V. Panasyuk,Quasi-Brittle Fracture Mechanics [in Russian] Naukova Dumka, Kiev (1991).Google Scholar

V. Z. Parton and V. G. Borisovskii,Brittle Fracture Dynamics [in Russian], Mashinostroenie, Moscow (1988).Google Scholar

B. A. Hopkinson, “Method of measuring the pressure produced in the detonation of high explosives or by the impact of bullets,”Proc. Roy. Soc.,A74, 498–507.Google Scholar

A. N. Khanukae,The Energy of Stress Waves in Rock Blasting [in Russian], Gosgortekhizdat, Moscow (1962).Google Scholar

A. G. Ivanov, “Spalling in a quasi-acoustic approximation,”Fiz. Goreniya Vzryva,4, No. 3, 475–480 (1975).Google Scholar

H. Kolsky, “An investigation of mechanical properties of materials at very high loading rates,”Proc. Phys. Soc.,62, 676–687 (1949).ADSGoogle Scholar

N. V. Novikov, “On the influence of loading rate on the fracture toughness of hard alloys,”Probl. Prochn., No. 10, 61–64 (1980).Google Scholar

L. S. Kostin, J. Duffy, and L. B. Freund, “Fracture initiation in metals under stress wave loading conditions,” in:Fracture Mechanics: News in Foreign Science [Russian translation], No. 25, Mir, Moscow, 151–171 (1981).Google Scholar

J. Congleton and B. K. Denton, “Measurement of fast crack growth in metals and nonmetals,”-ibid.Fracture Mechanics: News in Foreign Science [Russian translation], No. 25, Mir, Moscow, 172–198 (1981)Google Scholar

A. P. Bolshakev, A. S. Eremenko, V. L. Lupsha, et al., “Temperature and rate dependences of fracture toughness of polymethyl methacrylate at high rates of loading,”Fiz.-Khim. Mekh. Mater., No. 1, 79–82 (1981).Google Scholar

A. Andrezejewski, J. Klepaczko, and G. Pluvinage, “Determination experimentale de la tenacite a grande vitesse de chargement d'alliages d'aluminium,”J. Mech. Appl.,5, No. 3, 345–336 (1981).Google Scholar

J. Klepaczko, “Discussion of a new experimental method for determining the onset of crack propagation at high loading rates by means of stress waves,” in:Theoretical Principles of Design (перевести!)104, No. 1, 33–40 (1982).Google Scholar

V. P. Efimov and E. N. Sher, “Calculation of parameters of rigid-wedge penetration into a specimen with a cut,”Fiz. Tekh. Probl. Razrab. Polezn. Iskop., No. 1, 109–113 (1989).Google Scholar

V. P. Evimov, “Dynamic calibration of measurements of the fracture toughness of brittle materials by the wedging method,”Fiz. Tekh. Probl. Razrab. Polezn. Iskop., No. 4, 89–93 (1990).Google Scholar

V. P. Efimov, P. A. Martynyuk, and E. N. Sher, “Allowance for the influence of vertical forces in wedging,”Fiz. Tekh. Probl. Razr. Polezn. Iskop., No. 3, 32–36 (1992).Google Scholar

K. B. Bucknell,The Shock-Resistant Plastics [Russian translation], Khimiya, Leningrad (1981).Google Scholar

A. S. Eremenko, S. A. Novikov, and A. P. Pogorelov, “The investigation of propagation and interaction of fast cracks in organic glass,”Prikl. Mekh. Tekh. Fiz., No. 4, 109–112 (1979).Google Scholar

C. W. Smith, “Experiments in three-dimensional fracture problems,”Exp. Mech.,33, No. 4, 249–258 (1993).Google Scholar

V. A. Lupsha and S. A. Novikov, “Effect of temperature and strain rate on the fracture toughness of PMMC,”Fiz.-Khim. Mekh. Mater., No. 6, 116–118 (1979).Google Scholar

P. I. Vincent and K. V. Gothan, “Effect of crack propagation velocity on the fracture surface energy of polymethyl methacrylate,”Nature,210, 72 (1966).Google Scholar

A. A. Kaminskii,Fracture Mechanics of Viscoelastic Solids [in Russian], Naukova Dumka, Kiev (1980).Google Scholar

M. Ramulu, A. S. Kobayachi, B. S. J. Kang, and D. B. Borher, “Further studies on dynamic crack branching,”Exp. Mech.,23, No. 4, 431–437 (1983).Google Scholar

K. N. Fuller, P. G. Fox, and I. E. Field, “The temperature rise at the tip of fast moving cracks in glassy polymers,”Proc. Roy. Soc. London,A341, 537–557 (1975).ADSGoogle Scholar

G. I. Barenblatt and R. L. Salganik, “On wedging of brittle solids. Autooscillations in wedging,”Prikl. Mat. Mekh.,27, No. 3, 436–449 (1993).Google Scholar