A resource-saving technology for manufacturing unfired articles for bottom casting of steel
Production
Received:
- 11 Downloads
Abstract
Basic parameters of a resource-saving technology for manufacturing unfired articles for bottom steel casting that was developed under laboratory conditions are presented. Industrial tests of an experimental batch of unfired bottom tubes produced by the suggested technology have shown high performance properties for them and applicability of them for bottom casting of steel.
Keywords
Laboratory Condition Basic Parameter Experimental Batch Performance Property Steel Casting
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
Preview
Unable to display preview. Download preview PDF.
References
- 1.N. F. Lebedev and L. V. Uzberg, “Saving resources in the production and use of refractories,”Ogneupory, No. 11, 28–31 (1995).Google Scholar
- 2.G. G. Aristov,Refractory Articles for Steel Casting [in Russian], Metallurgiya, Moscow (1968).Google Scholar
- 3.L. D. Pilipchatin, V. I. Kozdoba, A. S. Lutsenko, et al., “Production of unfired steel-pouring hoppers on acid waste,”Ogneupory, No. 5, 25–27 (1992).Google Scholar
- 4.L. D. Pilipchatin, V. I. Kozdoba, A. S. Lutsenko, and V. V. Peschanskaya, “Determination of phosphoric anhydride in gaseous products of heat treatment of clay-chamotte mixtures on orthophosphoric acid,”Ogneupory, No. 1, 17–20 (1993).Google Scholar
Copyright information
© Plenum Publishing Corporation 1997