Strength of Materials

, Volume 26, Issue 7, pp 519–526 | Cite as

Localization of vibrations of shrouded turbomachine rotor blading

  • A. P. Zin'kovskii
  • I. N. Buslenko
  • V. V. Matveev
Scientific-Technical Section

Abstract

We study the influence of the nature of the circumferential distribution of the blade frequencies on the localization of the vibrations of shrouded blade rings. It is shown that the most favorable configuration (with regard to both the level of the vibratory stresses and the scatter of the resonant amplitudes of the vibrations) for the shrouded blade rings with mistuning of the blade frequencies is the “sawtooth” arrangement of the frequencies around the circumference of the disk, while the most unfavorable configuration is the arrangement with two or three neighboring blades with the same or similar frequencies. We propose a technique for studying the localized vibrations of the subject systems, making it possible to significantly simplify the solution of the problem.

Keywords

Similar Frequency Rotor Blading Localize Vibration Subject System Favorable Configuration 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Literature cited

  1. 1.
    A. P. Zin'kovskii, I. N. Buslenko, and V. V. Matveev, “Resonance vibrations of turbomachine rotors with annular shrouding. Part 1. Analytic model,” Probl. Prochn., No. 6, 85–89 (1989).Google Scholar
  2. 2.
    V. P. Ivanov, Vibrations of Turbomachine Rotors [in Russian], Mashinostroenie, Moscow (1983).Google Scholar
  3. 3.
    A. P. Zin'kovskii, “Distortion of sinusoidal nature of the vibration modes of systems with disrupted rotational symmetry and the phenomenon of modal localization. Part 1,” Probl. Prochn., No. 10, 45–52 (1992).Google Scholar
  4. 4.
    S. T. Wei and C. Pierre, “Localization phenomena in mistuned assemblies with cyclic symmetry. Part 2: Forced vibrations,” J. Vibration, Acoustics, Stress, and Reliability in Design,110, No. 4, 439–449 (1988).Google Scholar
  5. 5.
    D. J. Ewins, “Bladed disk vibration — a review of techniques and characteristics,” in Recent Advances in Structural Dynamics: Papers of International Conference, Southampton, 1980,1, pp. 187–210, Southampton (1980).Google Scholar
  6. 6.
    C. H. Hodges, “Confinement of vibration by structural irregularity,” J. Sound Vibration,82, No. 3, 411–424 (1982).Google Scholar
  7. 7.
    I. N. Buslenko, A. P. Zin'kovskii, V. V. Matveev, and M. V. Smertyuk, “Selection of discrete model of a turbomachine rotor with platform shrouding of the blades,” Probl. Prochn., No. 4, 38–43 (1991).Google Scholar
  8. 8.
    A. P. Zin'kovskii, M. V. Vasil'ev, and I. N. Buslenko, “Distortion of sinusoidal nature of the vibration modes of systems with disrupted rotational symmetry and the phenomenon of modal localization. Part 2,” ibid., No. 11, 58–66 (1992).Google Scholar
  9. 9.
    S. T. Wei and C. Pierre, “Localization phenomena in mistuned assemblies with cyclic symmetry. Part 1: Free vibrations,” J. Vibration, Acoustics, Stress, and Reliability in Design,110, No. 4, 429–438 (1988).Google Scholar
  10. 10.
    A. P. Zin'kovskii, M. V. Smertyuk, V. V. Matveev, et al., “Resonance vibrations of rodlike models of turbine blades with complex roots,” Probl. Prochn., No. 9, 85–89 (1984).Google Scholar

Copyright information

© Plenum Publishing Corporation 1994

Authors and Affiliations

  • A. P. Zin'kovskii
    • 1
  • I. N. Buslenko
    • 1
  • V. V. Matveev
    • 1
  1. 1.Institute of Strength of MaterialsNational Academy of Sciences of the UkraineKiev

Personalised recommendations