Journal of thermal analysis

, Volume 30, Issue 2, pp 457–466 | Cite as

Differential thermoanalyse in der Strukturuntersuchung der als Formmassenbindestoffe in der Giessereitechnik angewandten montmorillonitischen Formlehme

  • A. Micker
  • M. Tokarski
Article
  • 19 Downloads

Zusammenfassung

Die Differentialthermoanalyse eignet sich zur Bestimmung der thermischen Stabilität der in Formmassen angewandten montmorillonitischen Bindestoffe. Mit der DTA-Methode können die bei hohen Temperaturen in diesen Bindestoffen auftretenden strukturellen Änderungen bestimmt werden. Waschöl erhöht die Dehydratisierungs- und Dehydroxylierungstemperatur des montmorillonitischen Bindestoffes. In der Folge steigert also die Suszeptibilität des Obigen zur Hydratation und auch die thermische Stabilität.

Abstract

The hitherto presented results of researches of DTA of montmorillonite binding agent, applied in the moulding sand for foundry practice. With the aid of this method the temperature of dehydratation and dehydroxylation of binding agent with the addition and without of wash oil have been defined.

As a result of our investigations it has been found that the same oil rises the appearance of these effects.

With the aid of DTA these has also been defined structural changes occurring in montmorillonite binding agent, subjected to the activity of high temperature.

Резюме

Представлены резуль таты исследований термического разнос тного анализа и термогравиметричес кого монтмориплонит ового вяжущего вещества, пр именяемого в формовочных массах д ля литейного произво дства. С помощью этого метода определены температуры дегидра тации и дегидроксила ции вяжущего вещества с добавкой п ромывного масла и без этой добав ки. Установлено, что ма сло повышает температур у появления данных результатов. П ри помощи термическо го разностного анализа определены также структурные изменен ия, происходящие в монтмориллонитовом вяжущем веществе, подвергнутом действ ию высоких температу р.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Literatur

  1. 1.
    E. Dobiejewska und A. Micker, Przegląd Odlewnictwa, 11 (1978) 260.Google Scholar
  2. 2.
    A. Micker, Dissertation. Politechnika Wrocławska, Wrocław, 1980.Google Scholar
  3. 3.
    D. Boenisch, Disamatic Convention, Copenhagen, 1971, p. 28.Google Scholar
  4. 4.
    H. Berndt, Kohlenstaubfreier Formsand, Gießerei, 26 (1969) 761.Google Scholar

Copyright information

© Wiley Heyden Ltd., Chichester and Akadémiai Kiadó, Budapest 1985

Authors and Affiliations

  • A. Micker
    • 1
  • M. Tokarski
    • 1
  1. 1.Institut für Maschinenbau der Technischen Hochschule in OpolePolen

Personalised recommendations