Investigation of concrete additives by evolved gas analysis
- 28 Downloads
- 4 Citations
Abstract
An evolved gas analysis method measuring the organic gases and vapours was applied in the investigation of concrete additives. Several commercial superplasticizers and solid cement mortars containing one of them in different concentrations were measured. EGA curves offer some information for the identification of additives, however, the thermal behaviour of the additives in the substantial form and in the mortar is different. The area under the EGA curve and characteristic intensities of the signal may be applied in the quantitative determination of the additives in cement mortars.
Keywords
Polymer Physical Chemistry Inorganic Chemistry Thermal Behaviour Quantitative DeterminationZusammenfassung
Eine thermo-gasanalytische (EGA-) Methode zur Messung organischer Gase und Dämpfe wurde zur Untersuchung von Betonzusätzen verwendet. Einige kommerzielle Superverflüssiger sowie erhärtete Zementmörtel, die einen derselben in unterschiedlichen Konzentrationen enthalten, wurden untersucht. Die EGA-Kurven bieten einige Informationen zum Nachweis der Zusätze, deren Verhalten in substanzieller Form und im Mörtel jedoch differiert. Die Fläche unter dem EGA-Effekt und charakteristische Intensitäten des EGA-Signals können zur quantitativen Bestimmung der Zusätze im erhärteten Zement genutzt werden.
РЕжУМЕ
Дль ИсслЕДОВАНИь РАж лИЧНых ДОБАВОк-пРИсА ДОк Был ИспОльжОВАН МЕтО Д АНАлИжА ВыДЕльУЩЕг Ось гАжА (АВг). БылИ ИжМЕРЕН ы НЕскОлькО пРОДАжНы х плАстИФИкАтОРОВ И тВ ЕРДых цЕМЕНтНых РАстВОРОВ, сОДЕРжАЩИ х В РАжлИЧНОИ кОНцЕНт РАцИИ ОДИН Иж плАстИФИкАтОРОВ. к РИВыЕ АВг ДАУт НЕкОтОРУУ ИН ФОРМАцИУ ОтНОсИтЕль НО ИДЕНтИФИкАцИИ ДОБАВ Ок. ОДНАкО, тЕРМИЧЕскО Е пОВЕДЕНИЕ ДОБАВОк В И х ИсхОДНОИ ФОРМЕ И В ст РОИтЕльНых РАстВОРАх сОВЕРшЕНН О РАжлИЧНОЕ. плОЩАДь кРИВОИ АВг И х АРАктЕРНыЕ ИНтЕНсИВ НОстИ сИгНАлА МОгУт Быть Ис пОльжОВАНы Дль кОлИЧ ЕстВЕННОгО ОпРЕДЕлЕНИь ДОБАВОк В цЕМЕНтНых РАстВОРА х.
Preview
Unable to display preview. Download preview PDF.
References
- 1.T. Gál, L. Leisztner, G. Pokol and K. Eröss-Kiss, Magy. Kém. Foly., 92 (1986) 406.Google Scholar
- 2.N. B. Milestone, Cem. Concr. Res., 14 (1984) 207.Google Scholar
- 3.E. A. Tumanova, V. K. Klassen and E. A. Sychev, Ref. Zh. Khim., 1982. Abstr. No. 19M204.Google Scholar
- 4.H. J. Waechtler, N. Gahrmann and H. Hoffmann, Silikatechnik, 35 (1984) 269.Google Scholar
- 5.V. S. Ramachandran, Thermal Anal., Proc. Int. Conf., 7th, 1982, Vol. 2 p. 1296.Google Scholar
- 6.A. A. Rahman, Thermal Anal., Proc. Int. Conf., 7th, 1982, Vol. 2 p. 1310.Google Scholar
- 7.L. Laamanen. Appl. Polym. Symp. 31 (Proc. Cellui. Conf., 8th) (1976) 1139.Google Scholar
- 8.B. V. Petrusev, Ref. Zh. Khim., 1975, Abstr. No. 6M279.Google Scholar
- 9.C. R. Wilding and D. D. Double, Br. Ceram. Proc, 35 (Chem. Chem.-Relat. Prop. Cem.), (1984) 349.Google Scholar
- 10.V. A. Voznesenskii. Mczhdunar. Kongr. Khim. Cem., 6th, 1976, Vol. 2 p. 14.Google Scholar
- 11.L. Ben-Dor and D. Perez, Thermochim. Acta, 12 (1975) 81.Google Scholar