Archiv für Elektrotechnik

, Volume 68, Issue 6, pp 423–431 | Cite as

Eddy currents generated in an elliptic conductor by a transverse alternating magnetic field

  • P. Rolicz
Article
Received:

Contents

The eddy currents generated in an elliptic conductor by a transverse alternating uniform magnetic field are investigated by using the Bubnov-Galerkin method. By digital computations the graphs of the power losses caused by these currents are traced. Moreover, a way of construction of complete sequences is given for the case when the norms of the metric coefficients reciprocals are finite.

Keywords

Magnetic Field Power Loss Complete Sequence Eddy Current Digital Computation 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Die durch das Wechselmagnetfeld in einem elliptischen Leiter induzierten Wirbelströme

Übersicht

Die durch das Wechselmagnetfeld in einem elliptischen Leiter induzierten Wirbelströme werden mit der Bubnov-Galerkin-Methode untersucht. Man hat die durch numerische Berechnungen ermittelten Diagramme bearbeitet, die die Leitungsverluste darstellen. Außerdem hat man eine Herangehensweise zur Schaffung der vollständigen Folgen angegeben, für den Fall, in dem die Normen der Inversen der Metrikkoeffizienten endlich sind.

This is a preview of subscription content, log in to check access.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    Rolicz, P.: Calculation of conductors impedance by direct methods of functional analysis. Doctoral Thesis, Polytechnic of Szczecin, Poland, 1973 (in Polish)Google Scholar
  2. 2.
    Purczyński, J.; Rolicz, P.; Sikora, R.: Use of Ritz and Bubnov-Galerkin methods for calculation of inductance and impedance of conductors. Arch. Elektrotech. 57 (1975) 119–126Google Scholar
  3. 3.
    Rolicz, P.: Impedances of rotor-conductors with circular cross-section of a double-cage motor. Arch. Elektrotech. 62 (1980) 13–18Google Scholar
  4. 4.
    Rolicz, P.: Impedance of a rectangular conductor of the starting cage of a double-cage motor. Arch. Elektrotech. 63 (1981) 303–307Google Scholar
  5. 5.
    Rolicz, P.: Skin effect in rectangular active and idle conductors of a squirrel-cage motor. Sci. Electr. 28 (1982) 12–24Google Scholar
  6. 6.
    Peterson, W.: Calculation of the impedance of a conductor with an elliptic cross-section in the slot of an electric machine, Arch. Elektrotech. 60 (1978) 63–68Google Scholar
  7. 7.
    Peterson, W.: Electrodynamic forces acting on a conductor with elliptic cross-section in the slot of an electric machine. Arch. Elektrotech. 63 (1981) 135–139Google Scholar
  8. 8.
    Peterson, W.: Calculation of the impedance and the electrodynamic forces acting on an oval-shaped conductor in the slot of an electric machine. Arch. Elektrotech. 65 (1984) 195–201Google Scholar
  9. 9.
    Rolicz, P.; Szymański, Z.: Electrodynamic forces acting on rotor-conductors of a double-cage motor. Sci. Electr. 30 (1984) 43–66Google Scholar
  10. 10.
    Rolicz, P.: Transient skin effect in a rectangular conductor placed in a semi-closed slot. Arch. Elektrotech. 57 (1976) 329–338Google Scholar
  11. 11.
    Rolicz, P.: Use of Bubnov-Galerkin method for calculation of transient skin effect in foil-wound chokes. Proc. Compumag Conf. Oxford 1976, pp. 427–430Google Scholar
  12. 12.
    Rolicz, P.: Transient skin effect in a cylindrical conductor placed in a semi-closed slot. Arch. Elektrotech. 58 (1976) 333–338Google Scholar
  13. 13.
    Rolicz, P.: Non-steady state in a conducting ring enclosing a conductor with a current. Z. elektr. Inform. Energietech. 8 (1978) 419–426Google Scholar
  14. 14.
    Rolicz, P.: Impedances of cylindrical active and rectangular passive rotor-conductors. Electr. Mach. Power Syst. 9 (1984) 155–169Google Scholar
  15. 15.
    Kroczewski, Z.: Determination of impedance and electrodynamic forces acting upon a bar of chessman cross-section shape in asynchronous squirrel-cage motor. Sci. Electr. 28 (1982) 96–113Google Scholar
  16. 16.
    Peterson, W.: The finite element method application to the slot impedance calculation. Arch. Elektrotech. 67 (1984) 203–209Google Scholar
  17. 17.
    Rolicz, P.: Use of the Bubnov-Galerkin method to skin effect problems for the case of unknown boundary conditions. IEEE Trans. Mag. 18 (1982) 527–530Google Scholar
  18. 18.
    Rolicz, P.: Bubnov-Galerkin method for solving exterior alternating field problems. J. Phys. D: Appl. Phys. 15 (1982) 2401–2411Google Scholar
  19. 19.
    Rolicz, P.: Skin effect in a bifilar lead consisting of cylindrical conductors. Electr. Power Syst. Res. 6 (1983) 167–176Google Scholar
  20. 20.
    Szymanski, Z.: Skin effect in cylindrical segments placed in a harmonical transverse magnetic field, Arch. Elektrotech. 67 (1984) 75–81Google Scholar
  21. 21.
    Szymanski, Z.: Skin effect in cylindrical segments placed in the field of a thin conductor carrying current, Arch. Elektrotech. 68 (1985) 49–56Google Scholar
  22. 22.
    Gąsiorski, A. K.: A finite element method for analysing skin effect in conductors with unknown values of surface boundary conditions, Int. J. Numer. Meth. Eng. (1985) (to be publ.)Google Scholar
  23. 23.
    Gąsiorski, A. K.: Application of finite element method for calculation of power losses in the systems of two solid cylindrical conductors placed in sinusoidally varying transverse field. Compel (1985) (to be publ.)Google Scholar
  24. 24.
    Silvester, P. P.; Hsieh, M. S.: Finite element solution of 2-dimensional field problems with open boundaries, Proc. IEE 118 (1971) 1743–1747Google Scholar
  25. 25.
    Silvester, P. P.; Hsieh, M. S.: Projective solution of integral equations arising in electric and magnetic field problems. J. Comput. Phys. 8 (1971) 73–82Google Scholar
  26. 26.
    Silvester, P. P.; Lowther, D. A.; Carpenter, C. J.; Wyatt, E. A.: Exterior finite elements for 2-dimensional field problems with open boundaries, Proc. IEE 124 (1977) 1267–1270Google Scholar
  27. 27.
    Zienkiewicz, O. C.; Kelly, D. W.; Bettes, P.: The coupling of the finite element method and boundary solution procedures. Int. J. Numer. Meth. Eng. 11 (1977) 355–375Google Scholar
  28. 28.
    Krzemiński, S.; Sikora, J.; Sroka, J.; Wincenciak, S.: Application of boundary solution procedure in thermal field analysis. Arch. Elektrotech. 62 (1980) 195–200Google Scholar
  29. 29.
    Lean, M. H.; Wexler, A.: Accurate field computation with the boundary element method, IEEE Trans. Mag. 18 (1982) 331–335Google Scholar
  30. 30.
    Salon, S. J.; Schneider, J. M.: A hybrid finite element-boundary integral formulation of the eddy current problem. IEEE Trans. Mag. 18 (1982) 461–466Google Scholar
  31. 31.
    Armstrong, A. G.; Simkin, J.; Towbridge, C. W.: The Galerkin method of weighted residuals applied to the restricted magnetostatic scalar-potential boundaryintegral equation in three dimensions. IEEE Trans. Mag. 19 (1983) 2329–2332Google Scholar
  32. 32.
    Poltz, J.; Romaszewski, K.: Solution of quasi-stationary field problems by means of magnetic scalar potential. IEEE Trans. Mag. 19 (1983) 2425–2428Google Scholar
  33. 33.
    Moon, P.; Spencer, D. E.: Field theory for engineers. New York: Van Nostrand 1966Google Scholar
  34. 34.
    Franzl, M.: Wirbelstromverluste beim Hohlzylinder im Wechselfeld. Acta Tech. ČSAV 3 (1968) 371–393Google Scholar
  35. 35.
    Pirjola, R.: On the current induced within an infinitely long circular cylinder (or wire) by an electromagnetic wave. IEEE Trans. Electromag. Compat. 4 (1976) 190–197Google Scholar
  36. 36.
    Čerovský, Z.: Depth of penetration of an electromagnetic wave into a cylinder placed in a harmonically variable transverse magnetic field. Acta Tech. ČSAV, 2 (1979) 217–232Google Scholar

Copyright information

© Springer-Verlag 1985

Authors and Affiliations

  • P. Rolicz
    • 1
  1. 1.Electrical Engineering DepartmentPolytechnic of CzestochowaCzestochowaPoland

Personalised recommendations