Fatigue of gas-turbine blades made of heat-resistant casting alloys

T. P. Zakharova and B. F. Balashov, “Strength of cast gas turbine engine blades under alternating loads,” Probl. Prochnosti, No. 7 (1971).Google Scholar

Methods of Testing, Controlling, and Investigating Mechanical Engineering Materials (A reference book). Methods of Investigating Mechanical Properties of Metals [in Russian], Vol. 2, Mashinostroenie, Moscow (1974).Google Scholar

N. D. Zhukov, N. F. Lashko, and M. S. Belyaev, “Influence of solidification parameters on fatigue properties of casting alloys,” Probl. Prochnosti, No. 7 (1974).Google Scholar

B. F. Balashov, A. N. Arkhipov, and B. V. Volodenko, “Influence of the surface layer condition on the fatigue strength of standard test pieces and working turbine blades made of heat-resistant alloys,” Probl. Prochnosti, No. 6 (1974).Google Scholar

B. F. Balashov, in: Strength at Elevated Temperatures [in Russian], Vol. 26, Oborongiz, Moscow (1959).Google Scholar

R. Heywood, Designing by Photoelasticity, London (1953).Google Scholar

A. S. Leikin, Stress State and Fatigue Strength of Parts of Complex Shape [in Russian], Mashinostroenie, Moscow (1968).Google Scholar

B. N. Sinaiskii, “Fatigue strength of models of working blades of gas turbine engines subjected to programmed temperature variations simulating service conditions,” Probl. Prochnosti, No. 7 (1971).Google Scholar

B. F. Balashov and A. N. Petukhov, “Sensitivity of the alloy ÉI437B at elevated temperatures to load cycle asymmetry and stress concentration in relation to surface work hardening,” Probl. Prochnosti, No. 3 (1969)Google Scholar

B. F. Balashov and A. N. Petukhov, “Fatigue strength of heat-resistant alloys in relation to stress concentration, load cycle asymmetry, and surface work hardening,” Probl. Prochnosti, No. 4 (1974).Google Scholar