Effect of several technological factors on cold resistance of steels 10G2FR and 09G2S

O. V. Klyavin and B. I. Smirnov, “Change in the brittle strength of steel at 4.2°K after preliminary plastic deformation,” in: Cold Resistance of Steel and Steel Structures [in Russian], Nauka, Novosibirsk (1971).Google Scholar

D. Slout, “Higher-strengthsteels for welded structures,” Welding J., 7 (1960).Google Scholar

G. V. Zhemchuzhnikov et al., “Effect of a stress concentrator on the strength of steel after preliminary plastic deformation and aging,” Avtomaticheskaya Svarka, 1 (1966).Google Scholar

P. M. Anuchkin et al., “Criteria of reliability of gas pipes for pipelines in the Far North,” in: Weldability of Thermally Hardened Steels [in Russian], Nedra, Moscow (1967).Google Scholar

V. N. Nikitin et al., “Low-alloy steel with high resistance to brittle fracture at low temperatures,” in: Special Steels and Alloys [in Russian], No. 77 (1970).Google Scholar

E. A. Klausting and O. I. Nikol'skii, “Commercial tests of high-strength deep-hardening steels,” in: Special Steels and Alloys [in Russian], No. 77 (1970).Google Scholar

L. I. Guzevataya and B. P. Kolesnik, “Notch toughness of some steels for pipe with high cold resistance,” Problemy Prochnosti, 10 (1970).Google Scholar

B. M. Kazachkov and A. F. Kokreva, “Brittle fracture at low temperatures of structures made of thermally hardened steel MStT of moderate thickness with no application of load,” Svarochnoe Proizvodstvo, 12 (1968).Google Scholar

Yu. I. Rubenchik et al., “Steels with high strength in thermally hardened condition for pressure tanks,” in: Welding and Heat Treatment, Transactions of the All-Union Scientific-Research and Planning-Technological Institute of Chemical and Petroleum Machine Construction [in Russian], No. 2, Volgograd (1970).Google Scholar

N. P. Zhitnikov and V. N. Zemzin, “Susceptibility of brittle fracture of welded joints of Cr−Ni steels,” Svarochnoe Proizvodstvo, 10 (1970).Google Scholar

O. A. Bashkin, A. N. Kukin, et al., “Method of determining reliability of welded joints operating at low temperatures,” Problemy Prochnosti, 8 (1970).Google Scholar

A. S. Rakhmanov and L. S. Livshits, “Determining the brittleness of metals in storage tanks and pipelines,” in: cold Resistance of Steels and Steel Structures [in Russian], Nauka, Novosibirsk (1971).Google Scholar