Structural optimization

, Volume 15, Issue 3–4, pp 251–260 | Cite as

A generalized evolutionary method for numerical topology optimization of structures under static loading conditions

  • Chongbin Zhao
  • P. Hornby
  • G. P. Steven
  • Y. M. Xie
Research Papers
First Online:
Received:
Revised:

Abstract

Generalized evolutionary methods, which successively construct and solve static equilibrium problems with progressive mesh adaptation, are useful tools for defining structures that utilize their construction material to greatest effect in the finite element sense. By basing the successive element erosion upon (i) the contribution of an element to the strain energy of a structure and (ii) a certain material efficiency indicator of a structure, several weaknesses associated with previous methods have been overcome. Under static loading conditions, the strain energy contribution of an element is determined solely by the related stiffness and displacement vector. Consequently, the method is effective, and efficient when applied to problems involving such loading conditions. The efficacy of the method is demonstrated through numerical applications to the problem of optimizing the topologies of two structures, a cantilever structure and a Michell structure

Keywords

Topology Optimization Design Domain Homogenization Method Material Efficiency Structural Topology Optimization 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
This is a preview of subscription content, log in to check access.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. Bendsøe, M.P. 1989: Optimal shape design as a material distribution problem.Struct. Optim. 1, 193–202CrossRefGoogle Scholar
  2. Bendsøe, M.P.; Kikuchi, N. 1988: Generating optimal topologies in structural design using a homogenization method.Comp. Meth. Appl. Mech. Engng. 71, 197–224CrossRefGoogle Scholar
  3. Diaz, A.R.; Kikuchi, N. 1992: Solutions to shape and topology eigenvalue optimization problems using a homogenization method.Int. J. Num. Meth. Engng. 35, 1487–1502MATHMathSciNetCrossRefGoogle Scholar
  4. Gallagher, R.H.; Zienkiewicz, O.C. 1973:Optimum structural design. New York: WileyMATHGoogle Scholar
  5. Ma, Z.D.; Kikuchi, N.; Cheng, H.C.; Hagiwara, I. 1995: Topological optimization technique for free vibration problems.J. Appl. Mech., ASME 62, 200–207MATHCrossRefGoogle Scholar
  6. Olhoff, N.; Bendsøe, M.P.; Rasmussen, J. 1991: On CAD-integrated structural topology and design optimization.Comp. Meth. Appl. Mech. Engng. 89, 259–279CrossRefGoogle Scholar
  7. Rozvany, G.I.N.; Zhou, M.; Birker, T. 1992: Generalized shape optimization without homogenization.Struct. Optim. 4, 250–252CrossRefGoogle Scholar
  8. Rozvany, G.I.N.; Bendsøe, M.P.; Kirsch, U. 1995: Layont optimization of structures.Appl. Mech. Rev. 48, 41–119CrossRefGoogle Scholar
  9. Suzuki, K.; Kikuchi, N. 1991: A homogenization method for shape and topology optimization.Comp. Meth. Appl. Mech. Engng. 93, 291–318MATHCrossRefGoogle Scholar
  10. Tenek, L.H.; Hagiwara, I. 1993: Optimization of material distribution within isotropic and anisotropic plates using homogenization.Comp. Meth. Appl. Mech. Engng. 109, 155–167MATHCrossRefGoogle Scholar
  11. Xie, Y.M.; Steven, G.P. 1993: A simple evolutionary procedure for structural optimization.Comput. Struct. 49, 885–896CrossRefGoogle Scholar
  12. Zhao, C.; Steven, G.P.; Xie, Y.M. 1996a: Evolutionary natural frequency optimization of thin plate bending vibration problems.Struct. Optim. 11, 244–251CrossRefGoogle Scholar
  13. Zhao, C.; Steven, G.P.; Xie, Y.M. 1996b: General evolutionary path for fundamental natural frequencies of structural vibration problems: towards optimum from below.Struct. Engng. & Mech. 4, 513–527CrossRefGoogle Scholar
  14. Zhao, C.; Steven, G.P.; Xie, Y.M. 1997a: Effect of initial nondesign domain on optimal topologies of structures during natural frequency optimization.Comp. & Struct. 62, 119–131MATHMathSciNetCrossRefGoogle Scholar
  15. Zhao, C.; Steven, G.P.; Xie, Y.M. 1997b: Evolutionary natural frequency optimization of 2D structures with additional nonstructural masses.Eng. Comp. 14, 233–251CrossRefGoogle Scholar
  16. Zhao, C.; Steven, G.P.; Xie, Y.M. 1997c: Evolutionary optimization of maximizing the difference between two natural frequencies of a vibrating structure.Struct. Optim. 13, 148–154CrossRefGoogle Scholar
  17. Zhao, C.; Steven, G.P.; Xie, Y.M. 1998: A generalized evolutionary method for natural frequency optimization of membrane vibration problems in finite element analysis.Comp. & Struct. 66, 353–364MATHCrossRefGoogle Scholar
  18. Zhou, M.; Rozvany, G.I.N. 1992: DCOC: an optimality criteria method for large systems. Part I: theory.Struct. Optim. 5, 12–25CrossRefGoogle Scholar
  19. Zhou, M.; Rozvany, G.I.N. 1993: DCOC: an optimality criteria method for large systems. Part II: algorithm.Struct. Optim. 6, 250–262CrossRefGoogle Scholar

Copyright information

© Springer-Verlag 1998

Authors and Affiliations

  • Chongbin Zhao
    • 1
  • P. Hornby
    • 1
  • G. P. Steven
    • 2
  • Y. M. Xie
    • 3
  1. 1.Division of Exploration and MiningCSIRONedlandsAustralia
  2. 2.Finite Element Analysis Research CentreEngineering Faculty, University of SydneyAustralia
  3. 3.Dept. of Civil and Building EngineeringVictoria University of TechnologyAustralia

Personalised recommendations