Sintering of lime-silica raw mixtures
At the Enterprises and Institutes
Received:
- 10 Downloads
Abstract
The process of liquid-phase sintering of lime-silica materials is considered. The regular features of the process can be used in production of ceramic fillers.
Keywords
Polymer Regular Feature Ceramic Filler
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
Preview
Unable to display preview. Download preview PDF.
References
- 1.Yu. M. Butt, M. M. Sychev, and V. V. Timashev,The Chemical Technology of Binding Materials [in Russian], Vysshaya Shkola, Moscow (1980).Google Scholar
- 2.V. V. Timashev and B. S. Al'bats, “Processes of liquid-phase sintering in portland cement clinker,” in:6th Int. Congr. on Cement Chemistry [in Russian], Vol. 1, Stroiizdat, Moscow (1976), pp. 165 - 169.Google Scholar
- 3.V. I. Shubin, “Investigation of the sintering process in portland cement clinker,”6th Int. Congr. on Cement Chemistry [in Russian], Vol. 1, Stroiizdat, Moscow (1976), pp. 173 - 176.Google Scholar
- 4.A. P. Osokin, E. N. Potapova, and B. S. Al'bats, “Effect of the properties of molten oxide salts on liquid-phase sintering,”Zh. Prikl. Khim., No. 12, 2649 – 2653 (1986).Google Scholar
- 5.M. V. Kougiya and V. L. Ugolkov, “Differential-thermal analysis of portland cement raw mixtures,”Tsement, No. 11, 19 – 21 (1981).Google Scholar
- 6.M. L. Bykhovskii,Investigation of the Formation of Granules in Material Fired in High-Temperature Zones of Rotary Kilns. Author's Abstract of Candidate's Thesis [in Russian], Moscow (1981).Google Scholar
Copyright information
© Plenum Publishing Corporation 1997