Aerodynamic classification of finely dispersed bulk materials and equipment for its implementation

M. D. Barskii, Fractionation of Powders [in Russian], Nedra, Moscow (1982).Google Scholar

V. E. Mizonov and S. G. Ushakov, Aerodynamic Classification of Powders [in Russian], Khimiya, Moscow (1989).Google Scholar

S. Bernotat, “Status of classification technology — classification for bulk materials,” Zement-Kalk-Gips, No. 2, 81–90 (1990).Google Scholar

I. V. Klumpar, “Developing high efficiency air classifiers,” Paper I9.1, Proc. Int. Congr. CHISA'90, Prague (1990).Google Scholar

I. V. Klumpar, F. N. Currier, and T. A. Ring, “Air classifiers,” Chem. Eng.,93, No. 5, 77–92 (1986).Google Scholar

S. G. Ushakov and N. I. Zverev, Inertial Separation of Dusts [in Russian], Énergiya, Moscow (1974).Google Scholar

V. E. Mizonov and S. G. Ushakov, “Classification processes for fine ground materials,” Khim. Promst., No. 8, 53–57 (1989).Google Scholar

V. E. Mizonov and S. G. Ushakov, “Investigations of the effect of separation efficiency on the productivity of grinding units,” Teploénergetika, No. 4, 49–51 (1984).Google Scholar

V. E. Mizonov, E. V. Barochkin, and S. G. Ushakov, “Inverse problem of calculating the fractionation of powders,” Izv. Vyssh. Uchebn. Zaved., Khim. Khim. Tekh.,29, No. 2, 125–127 (1986).Google Scholar

A. R. Gornushkin, “Construction of mathematical models of cascades of helical classifiers,” in: Devlopment and Application of Helical Electromagnetic Apparatus for Improving Industrial Processes [in Russian], Tambov (1989), p. 52.Google Scholar

V. P. Zhukov, A. R. Gornushkin, V. E. Mizonov, and S. F. Shishkin, “Formalizing the construction of the separation curve for the multistage classification of powders,” Teor. Osnovy Khim. Tekh., No. 3 (1991).Google Scholar

V. E. Mizonov, “Stability of the grinding process in a closed cycle with an ideal classifier,” Izv. Vyssh. Uchebn. Zaved., Khim. Khim. Tekh.,26, No. 12, 1518–1520 (1983).Google Scholar

A. R. Gornushkin, V. P. Zhukov, and V. E. Mizonov, “Stability of the classification process with recycling,” Dep. No. 834-khp89 [in Russian], NIITÉKhim [Scientific Research Institute of Technical and Economic Research of the State Committee of the Council of Ministers for Chemistry, USSR] (1990).Google Scholar

V. P. Osokin, S. G. Ushakov, and V. E. Mizonov, “Increasing the productivity of spherical drum mills,” Élektr. Stantsii, No. 4, 25–27 (1987).Google Scholar

V. V. Panteleev, V. I. Chursin, V. E. Mizonov, et al., “An air through-flow separator for classifying emulsified polyvinyl chloride,” Khim. Neft. Mashinostr., No. 2, 11–12 (1981).Google Scholar

S. G. Ushakov, Yu. N. Murokin, and V. E. Mizonov, “Reconstruction of pass-through air classifiers for powdered materials,” Khim. Promst., No. 8, 41–43 (1981).Google Scholar

D. V. Tupitsyn, V. E. Mizonov, and A. D. Egorov, “Effect of flow nonuniformity on the efficiency of equilibrium aerodynamic classification,” in: Development of the Theory and Design Formulation of Processes of Fine Grinding, Classification, Drying, and Mixing Materials [in Russian], Ivanovo (1988), pp. 15–18.Google Scholar

E. V. Barochkin, V. E. Mizonov, and S. G. Ushakov, “Modernization of industrial production lines of iron oxide and Prussian red at the Krivoi Rog Iron Oxide Plant,” Lakokras. Mater. Ikh Primen., [Lacquer Coloring Materials and Their Application], No. 6, 48–50 (1985).Google Scholar

“Separator for powdered materials,” Inventor's Certificate No. 959,846 USSR, MKI V 07 V 7/08 [in Russian].Google Scholar

S. V. Tupitsyn, E. V. Barochkin, and A. A. Pospelov, “Benchmark comparison of the efficiency of centrifugal classifiers of the baffle and centrifugal-counterflow type,” in: Improving the Processes of Mechanical Processing of Bulk Materials [in Russian], Ivanovo (1987), pp. 89–91.Google Scholar

I. Aoki, and T. Matsuyama, “Particle size classification by a centrifugal air classifier under reduced pressure, Paper I5.26, Proc. Int. Congr. CHISA'90, Prague (1990).Google Scholar

H. Otwinowski, L. Pastucha, and E. Mielczarek, “Research of the influence of jet milling parameters of classification process quality in the centrifugal separator,” Paper I5.24, Proc. Int. Congr. CHISA'90, Prague (1990).Google Scholar

V. E. Mizonov, “Development of stochastic models of centrifugal dust classification,” Paper I9.80, Proc. Int. Congr. CHISA'90, Prague (1990).Google Scholar

O. Molerus and H. Hoffman, “Representation of air classification curves by a stochastic model,” Chem. Ing. Tech.,41, No. 5–6, 340–344 (1969).Google Scholar

A. N. Lebedev, Preparation and Grinding Fuel at Electric Power Plants [in Russian], Énergiya, Moscow (1969).Google Scholar

F. Kaiser, “A zigzag separator — a new type of VKN air separator,” Transactions of European Communications on Grinding [Russian translation], Stroiizdat, Moscow (1966).Google Scholar