Journal of Materials Science

, Volume 27, Issue 11, pp 2941–2945 | Cite as

Molten salt synthesis of anisotropic BaFe12O19 powders

  • Ki Hyun Yoon
  • Dong Heon Lee
  • Hyung Jin Jung
  • Sang Ok Yoon


The formation mechanism, morphology, and magnetic properties of anisotropic BaFe12O19 powders prepared by the 0.8 Na2SO4-0.2 K2SO4 molten salt synthesis have been investigated. The reaction can be completed at temperatures lower than 845 °C which is the melting point of the 0.8 Na2SO4-0.2 K2SO4 salt mixture, due to the presence of the low melting phase related to the formation of BaSO4 and Na6CO3(SO4)2. Even at temperatures lower than 845 °C, with the aid of the low melting phase, the morphology of ferrites was thin platelets. Magnetic properties such as coercivity, saturation magnetization, and remanent force are comparable to those found in other processing techniques. The orientation degree of the sintered body was very high due to anisotropic morphology; thus powders from molten salt synthesis are suitable for grain oriented ceramics.


Polymer Ferrite Melting Point Magnetic Property Formation Mechanism 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.


Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.


  1. 1.
    K. Haneda, C. Miyakawa andH. Kojima,J. Amer. Ceram. Soc. 57 (1974) 354.Google Scholar
  2. 2.
    W. Ross,ibid. 63 (1980) 6011.Google Scholar
  3. 3.
    C. Mee andJ. Jeschke,J. Appl. Phys. 34 (1963) 1271.Google Scholar
  4. 4.
    B. Beer andG. Planar,Brit. Commun. Electron. 5 (1958) 939.Google Scholar
  5. 5.
    A. Srivastava, P. Singh andM. Gupta,J. Mater. Sci. 22 (1987) 1489.Google Scholar
  6. 6.
    K. Higuchi, S. Naka andS. Hirano,J. Ceram. Soc. Jpn. 95 (1987) 186.Google Scholar
  7. 7.
    Idem, Adv. Ceram. Mater. 1 (1986) 104.Google Scholar
  8. 8.
    Idem, ibid. 3 (1988) 278.Google Scholar
  9. 9.
    Idem, ibid. 2 (1987) 65.Google Scholar
  10. 10.
    M. Kiyama,Bull. Chem. Soc. Jpn. 49 (1976) 1855.Google Scholar
  11. 11.
    B. Shirk andW. Buessem,J. Amer. Ceram. Soc. 53 (1970) 192.Google Scholar
  12. 12.
    R. Arendt,J. Solid State Chem. 8 (1973) 339.Google Scholar
  13. 13.
    D. G. Wickham, in “Proceedings of the 1st International Conference on Ferrites”, Kyoto, July 1970, edited by Y. Hoshino, S. Iida and M. Sugimoto (University Park Press, Baltimore, 1971) p. 105.Google Scholar

Copyright information

© Chapman & Hall 1992

Authors and Affiliations

  • Ki Hyun Yoon
    • 1
  • Dong Heon Lee
    • 2
  • Hyung Jin Jung
    • 2
  • Sang Ok Yoon
    • 3
  1. 1.Department of Ceramic EngineeringYonsei UniversitySeoulKorea
  2. 2.Division of CeramicsKorea Institute of Science and TechnologySeoulKorea
  3. 3.Department of Materials EngineeringKang Nung National UniversityKang NungKorea

Personalised recommendations