Approximate calculation of the concentration of elements in eutectic coatings based on iron

  • Yu. I. Koval'chik
  • M. I. Pashechko
  • V. M. Golubets
Article

Keywords

Iron Approximate Calculation Eutectic Coating 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Literature cited

  1. 1.
    A. I. Raichenko, Diffusion Calculations for Powder Mixtures [in Russian], Naukova Dumka, Kiev (1969).Google Scholar
  2. 2.
    A. Ya. Shinyaev, Diffusion and High-Temperature Properties of Alloys of Refractor Metal [in Russian], Metallurgiya, Moscow (1982).Google Scholar
  3. 3.
    M. A. Krishtal, Mechanism of Diffusion in Iron Alloys [in Russian], Metallurgiya, Moscow (1972).Google Scholar
  4. 4.
    A. I. Raichenko, Mathematical Diffusion in Applications [in Russian], Naukova, Dumka, Kiev, (1981).Google Scholar
  5. 5.
    B. Ya. Lyubov, Diffusion Process in Heterogeneous Solids [in Russian], Nauka, Moscow (1981).Google Scholar
  6. 6.
    V. M. Goluvets and M. I. Pashechko, “Principles of development and special features of formation of eutectic coatings from the liquid phase,” Fiz. Khim. Mekh. Mater., No. 6, 25–29, (1984).Google Scholar
  7. 7.
    L. K. Savitskaya, “Calculation of the rate of contact melting of eutectic systems,” Izv. Vyssh. Uchebn. Zaved., Fiz., No. 6, 133–138 (1962).Google Scholar
  8. 8.
    Yu. S. Dolgov and Yu. F. Sidokhin, Problems of Formation of Brazed Joint [in Russian], Mashinostroenie, Moscow (1973).Google Scholar
  9. 9.
    V. M. Goluvets, M. I. Pashechko, and Yu. I. Koval'chik, “Approximate calculation on the concentration of elements of the coating under the condition of functional dependence or the diffusion coefficient of this concentration,” Fiz. Khim. Mekh. Mater., No. 5, 47–51 (1988).Google Scholar
  10. 10.
    V. M. Goluvets and M. I. Pashechko, “Evaluation of the structural morphology of eutectic coatings using technological factors,” Metalloved. Terom. Obreb. Met., No. 7, 55–58 (1987).Google Scholar
  11. 11.
    I. B. Brovskii, K. P. Grov, I. D. Marchukov, and Yu. E. Ugaste, Processes of Mutual Diffusion in Alloys [in Russian], Nauka, Moscow (1973).Google Scholar
  12. 12.
    K. G. Smitlz, Metals (Handbook) [Russian translation], Metallurgiya, Moscow (1980).Google Scholar
  13. 13.
    K. Hauffe, Reactions in Solids and on the Surface [Russian translation], Vol. 1, IL, Moscow (1962).Google Scholar
  14. 14.
    S. D. Gertariken and I. Ya. Dekhtyar, Diffusion in Metals and Alloys in the Solid Phase [in Russian], Fizmatgiz, Moscow (1960).Google Scholar

Copyright information

© Plenum Publishing Corporation 1990

Authors and Affiliations

  • Yu. I. Koval'chik
    • 1
  • M. I. Pashechko
    • 1
  • V. M. Golubets
    • 1
  1. 1.G. V. Karpenko Physicomechanical InstituteAcademy of Sciences of the Ukrainian SSRLvov

Personalised recommendations