Local corrosion damage of aluminum alloys

L. L. Shraier (ed.), Corrosion (Reference Book) [Russian translation], Metallurgiya, Moscow (1981).Google Scholar

V. D. Kalinin, V. S. Sinyavskii, and N. I. Ivanenko, “Features of the corrosion behavior of Al-Zn-Mg system alloys in tests under atmospheric conditions,” Fiz.-Khim. Mekh. Mater., No. 3, 38–42 (1981).Google Scholar

Aluminum Alloys (Handbook) [Russian translation], Metallurgiya, Moscow (1979).Google Scholar

G. P. Ponzano and J. Pagetti, “Influence de la nature du film d'oxyde sur le comportement anodique d'un alliage aluminium-magnésium à 5%,” Corrosion (France), No. 3, 160–163 (1973).Google Scholar

R. K. Melekhov, Corrosion Cracking of Titanium and Aluminum Alloys [in Russian], Tekhnika, Kiev (1979).Google Scholar

V. S. Sinyavskii and V. D. Val'kov, The Corrosion and Protection of Aluminum Alloys [in Russian], Metallurgiya, Moscow (1979).Google Scholar

M. Pourbaix, Atlas d'Equilibres Electrochemiques (25°C), Cauthier-Villars, Paris (1963).Google Scholar

D. D. Macdonald, G. R. Shierman, and P. Butler, The Thermodynamics of Metal-Water Systems at Elevated Temperatures. 2. Iron-Water System, Atomic Energy of Canada, Limited, AECL-4137 (1972).Google Scholar

H. E. Townsed, “Potential-pH diagrams of elevated temperature for the system Fe-H₂0,” Corros. Sci., No. 5, 343–358 (1970).Google Scholar

R. K. Melekhov, A. M. Krutsan, and M. V. Koval', “The thermodynamics of the process of caustic cracking and local corrosion of low alloy steel,” Fiz.-Khim. Mekh. Mater., No. 6, 3–10 (1981).Google Scholar

A. M. Sukhotin and L. I. Tungusova, “The passivity of titanium and the electrochemical behavior of its oxides and hydrides,” in: Titanium [in Russian], Vol. 2, Vsesoyuz. Inst. Leg. Splav., Moscow (1978), pp. 43–47.Google Scholar

R. J. Gest and A. R. Troiano, “Stress corrosion and hydrogen embrittlement in an aluminum alloy,” Corrosion, No. 8, 274–279 (1974).Google Scholar

O. D. Smiyan, E. P. Khabarov, and A. T. Kruzhkov, “A laser microanalyzer for gases in metals,” in: Program and Summaries of Papers for the 15th Colloquium of Central Plant Laboratories of the Central Scientific Research Institute for Ferrous Metallurgy [in Russian], Moscow (1973), pp. 38–39.Google Scholar

V. I. Lakomskii and O. D. Smiyan, “Some features of the conduct of local mass spectral analysis of metals for gaseous impurity content,” in: Methods of Determining Gases in Metals and Alloys [in Russian], Mosk. Dom. Nauch. Tekh. Prop., Moscow (1971), p. 45.Google Scholar

M. V. Koval', “The influence of polarization on the corrosion cracking of D16 aluminum alloy in a chloride solution,” Fiz.-Khim. Mekh. Mater., No. 4, 102–104 (1979).Google Scholar