Photometrische Bestimmung des Mangans als Bis-(dipicolinato)-manganat(III)
- 20 Downloads
- 2 Citations
Zusammenfassung
Mangangehalte zwischen 2 und 200 μg/ml lassen sich durch Überführung des Mangans in das rote Bis-(dipicolinato)-manganat(III)-ion bestimmen, dessen Konzentration im Bereich eines der beiden Absorptionsmaxima bei 510 nm und bei 1014 nm photometrisch gemessen wird. Zur Oxydation des Mangans dienen salpetersaure Lösungen von Kaliumbromat oder salzsaure Lösungen von Kaliumchlorat. Die Oxydation läuft bei Zimmertemperatur sehr rasch ab; in schwefelsauren Lösungen setzt die Oxydation mit Kaliumbromat erst nach einer von der Bromatkonzentration abhängigen Verzögerungszeit ein. In allen Fällen resultieren Lösungen, deren Extinktionen im pH-Intervall 1,5–4,0 konstant und sehr gut reproduzierbar sind, so daß das Verfahren eine Genauigkeit von 0,2–0,5% ohne weiteres zuläßt. Das Bestimmungsverfahren ist nur wenig störanfällig. Systematische Fehler, die durch Kobalt, Kupfer Nickel, Chrom oder Eisen verursacht werden, können innerhalb gewisser Grenzen entweder rechnerisch eliminiert oder durch Übergang zu einer anderen Meßwellenlänge vermieden werden.
Summary
In acidic media and in presence of pyridine-2,6-dicarboxylic acid (dipicolinic acid) divalent manganese can be readily oxidised to form red solutions of the bis-(dipicolinato)-manganate(III) complex ion. The fairly intense light absorption of these solutions, when measured at 510 nm or 1014 nm, offers a good possibility for the photometric determination of manganese in the concentration range between 2 and 200 μg/ml. The reproducibility of measurements is about 0.2–0.5%. The measurements are widely unaffected by changes in pH and reagent concentration. Most cations and anions do not interfere, even when present in relatively large excess.
Preview
Unable to display preview. Download preview PDF.
Literatur
- 1.Anderegg, G.: Helv. chim. Acta 43, 414, 1530 (1960).Google Scholar
- 2.Asmus, E.: diese Z. 183, 401 (1961).Google Scholar
- 3.Bruno, S.: Accad. pugliese sci. Atti. relag. 11, Teil 2, 409 (1953).Google Scholar
- 4.Gottlieb, A., u. F. Hecht: Mikrochemie 35, 337 (1950); vgl. diese Z. 135, 46 (1951/52).Google Scholar
- 5.Hartkamp, H.: Angew. Chem. 72, 349 (1960).Google Scholar
- 6.Hartkamp, H.: diese Z. 171, 262 (1959).Google Scholar
- 7.Hartkamp, H.: diese Z. 182, 259 (1961).Google Scholar
- 8.Hartkamp, H.: diese Z. 184, 98 (1961).Google Scholar
- 9.Hartkamp, H.: diese Z. 187, 16 (1962).Google Scholar
- 10.Hartkamp, H.: diese Z. 190, 66 (1962).Google Scholar
- 11.Iwantscheff, G.: Das Dithizon und seine Anwendungen in der Mikro- und Spurenanalyse, Weinheim 1950.Google Scholar
- 12.Nightingale, jr., E. R.: Analyt. Chemistry 31, 146 (1959); vgl. diese Z. 172, 296 (1960).Google Scholar
- 13.Přibil, R.: Komplexone in der chemischen Analyse. Berlin 1961, S. 257, 280, 351 ff., 406ff.Google Scholar
- 14.
- 15.Přibil, R. u. E. Hornychová: Collect. czchechoslov. chem. Commun. 15, 456 (1950); vgl. diese Z. 135, 361 (1952).Google Scholar
- 16.Přibil, R., u. J. Vulterin: Chem. Listy 48, 1132 (1954); vgl. diese Z. 145, 75 (1955).Google Scholar
- 17.Purdy, W. C., and D. N. Hume: Analyt. Chemistry 27, 256 (1955); vgl. diese Z. 148, 277 (1955/56).Google Scholar
- 18.Schröder, H.: Metall 8, 542 (1954); 9, 100 (1955); vgl. diese Z. 151, 307 (1956).Google Scholar
- 19.
- 20.
- 21.
- 22.
- 23.Tourky, A. R., I. M. Issa and I. F. Hewaldy: Anal. chim. Acta (Amsterdam) 16, 151 (1957); vgl. diese Z. 158, 135 (1957).Google Scholar