Methode zur kontinuierlichen potentiometrischen Bestimmung von Reduktions- und Oxydationsmitteln
- 19 Downloads
- 3 Citations
Zusammenfassung
Es wird über eine potentiometrische Methode berichtet, Reduktions- und Oxydationsmittel in einer kontinuierlich durchflossenen Meßzelle zu bestimmen. Durch den Einsatz einer Maßlösung mit einem Hilfsredoxsystem, bestehend aus einer Mischung seines oxydierten und seines reduzierten Anteils, wird eine Linearisierung der Eichkurve erreicht. Durch Anpassung der Maßlösung an die Probenkonzentration kann die Methode in einem linearen Meßbereich von 2μVal/l bis 40 mVal/l mit einer Fehlergrenze von ± 0,5% des jeweiligen Skalenendwertes angewandt werden. Als Beispiel dient die Bestimmung von Dichromat bzw. Thiosulfat mit Hilfe des Redoxsystems Fe(II)/Fe(III).
Method for the continuous potentiometric determination of reducing and oxidizing agents
Abstract
A potentiometric method is described for the determination of reducing and oxidizing agents employing a flow-through cell. By use of a standard solution containing a mixture of the oxidized and the reduced state of a redox system a linearisation of the calibration graph is obtained. By adjusting the standard solution to the concentration of the sample a linear range from 2 μval/l to 40 mval/l is achieved with a tolerance of ±0.5% of the full scale value. The determination of dichromate and thiosulphate, respectively, by means of the redox system Fe(II)/Fe(III) is presented as an example.
Literatur
- 1.Berka, A., Vulterin, J., Zýka, J.: Maßanalytische Oxydations- und Reduktionsmethoden. Leipzig: Akad. Verlagsges. 1964.Google Scholar
- 2.Jander, G., Jahr, K. F., Knoll, H.: Maßanalyse, Sammlung Göschen 1969.Google Scholar
- 3.Lang, R., Kurtenacker, H.: diese Z. 123, 169 (1942).Google Scholar