Abstract
Simulation of Numerical Control Machine-Tools (NCMT) based on Virtual Reality allows us a previous visualization of the different processes performed on a manufactured part. Moreover, simulation permits inexperienced workers to learn how to control the machine in a safe way even from a remote location through the web. The development of a NC milling machine commonly used in the aeronautical industry is presented here. The machine architecture and its environment are based on object oriented programming, which makes possible upgrade and modularity. Each machine element is represented by a C++ class, as well as the compiler that interprets the NC program code lines.
Similar content being viewed by others
References
Vince, J.: Essential virtual reality. How to understand the techniques and potencial of virtual reality (2001)
Xu Z., Zhao Z. and Bines R.W. (2000). Constructing virtual environments for manufacturing simulation. Int. J. Prod. Res. 38(17): 4171–4191
Rubio E.M., Sebastián M.A. and Sanz A. (2004). Simulación de sistemas flexibles de fabricación mediante modelos de realidad virtual. Información Tecnológica 1(15): 49–54
Banerjee P. and Zetu D. (2001). Virtual Manufacturing. Wiley, London
Lu S.C.-Y., Shpitalni M. and Gadh R. (1999). Virtual and augmented reality technologies for product realization. Manuf. Technol. 48(2): 471–475
The bologna declaration of 19 june 1999. Joint declaration of the european ministers of education. Technical report (1999)
Rubio Alvir E.M., Sebastián Pérez M.A. and Sanz Lobera A. (2002). Aplicaciones docentes de realidad virtual en ingeniería de fabricación. Anales de ingeniería mecánicas 14: 1576–1581
Sanz Lobera, A., Rubio Alvir, E.M., Sebastián Pérez, M.A.: Considerations to the application of virtual reality technics for the study and the training with numerical control machine-tools. In: Proceedings of CIRP International Manufacturing Education Working Group CIMEC-2002, vol. 1, pp. 265–273 (2002)
Sanz Lobera A., Rubio Alvir E.M. and Sebastián Pérez M.A. (2001). Aplicacion de técnicas de realidad virtual en la utilización de máquinas-herramienta de control numérico. Actas del V Congreso Iberoamericano de Ingeniería Mecánica 1: 1157–1164
Rubio, E.M.: Aplicación de técnicas de Realidad Virtual al estudio del comportamiento de sistemas flexibles de fabricación. PhD thesis, UNED, Madrid (2002)
Sanz Lobera A., Pérez Serrano J. and Plaza Serrano F. (2002). Consideraciones relativas al software applicable en desarrollos de simulación en fabricación mediante realidad virtual. Anales de ingeniería mecánica 14: 273–277
Sanz Lobera, A., Rubio Alvir, E.M., Martínez Murillo, C., Sebastián Pérez, M.A.: Manufacturing Processes Analysis by Virtual Reality, Materials Science Forum, Advances in Materials Processing Technologies. ISBN: 0-87849-417-0 (2006)
Murcia, P.J., Sanz Lobera, A., Sanz López, I., Rubio Alvir, E.M.: A numerical control lathe made on a virtual reality environment. In: Proceedings of Virtual Concept 2005. Biarritz, France (2005)
Piegel les.a. (1997). The Nurbs Book. Springer, Berlin
Wright, R.S., Lipchak, B.: OpenGL SuperBible. 3rd (ed.) ISBN-13: 978-0-672-32601-1, SAMS (2004)
Sanz A., González I., Garcíadel Valle I. and Tobaruela E. (1974). La célula flexible de fabricación etsia-cff. Anales de ingeniería mecánica 10(3): 127–134
Sanz Lobera A. and García Zamora J. (2004). Aplicación de la programación orientada a objetos en la simulación mediante realidad virtual de equipos automatizados de fabricación. Anales de ingeniería mecánica 15: 223–231
Rubio Alvir, E.M., Sanz Lobera, A., Sebastián Pérez, M.A.: Virtual reality techniques applied on flexible manufacturing systems behaviour. In: Proceedings of 3rd International Conference on Advanced Manufacturing Technology, pp. 1131–1136 (2004)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Acal, A.P., Lobera, A.S. Virtual reality simulation applied to a numerical control milling machine. Int J Interact Des Manuf 1, 143–154 (2007). https://doi.org/10.1007/s12008-007-0016-2
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12008-007-0016-2