Abstract
In this study, sulfnitriding treatments were performed to improve the properties of wear resistance of AISI4140 as steel for machine structural use. Prior to these plasma treatments, a thick compound layer, a thickness of 7 to 10 μm, was formed on the surfaces of the specimens, after which the sulfnitriding treatments were performed in the same chamber. Plasma nitriding was carried out at 813 K for 2 h in an atmosphere of 75 vol% N2 and 25 vol% H2 in addition to C2H2 flowing at 50 sccm. To form a sulphide layer of about 2 to 5 μm in thickness, we carried out plasma sulfnitriding at temperature of 723 K-813 K for 2 h in the plasma nitriding in addition to H2S flowing at 100 sccm. The friction coefficient of AISI 4140 steels was reduced to 0.4 by changing the process temperature during plasma sulfnitriding. The wear volume loss also were decreased with increasing sulfnitriding process temperatures.
Similar content being viewed by others
References
I. Lee and I. Park, Surf. Coat. Technol. 200, 3540 (2006).
H. D. Wang, B. S. Xu, J. J. Liu and D. M. Zhuang, Appl. Surf. Sci. 252, 1084 (2005).
H. D. Wang, D. M. Zhuang, K. L. Wang and J. J. Liu, Mater. Sci. Eng. A 357, 321 (2003).
N. Zhang et al., Surf. Coat. Technol. 132, 1 (2000).
J. J. Kang et al., Mater. Chem. Phys. 129, 625 (2011).
H. D. Wang, D. M. Zhuang, K. L. Wang and J. J. Liu, Mater. Lett. 57, 2225 (2003).
H. D. Wang et al., Appl. Surf. Sci. 252, 1704 (2005).
N. Zhang et al., Appl. Surf. Sci. 161, 170 (2000).
W. Yue et al., Tribol. Int. 44, 2029 (2011).
Y. D. Liu, C. B. Wang, J. J. Yuan and J. J. Liu, Surf. Coat. Technol. 205, 470 (2010).
Y. K. Ko et al., Surf. Coat. Technol. 202, 5501 (2008).
P. Zhang, J. J. Zhao and W. Z. Han, Surf. Coat. Technol. 131, 386 (2000).
D. M. Zhuang et al., Wear 225-229, 799 (1999).
H. D. Wang, B. S. Xu, J. J. Liu and D. M. Zhuang, Vacuum 75, 353 (2004).
H. Liu, J. C. Li, F. Sun and J. Hu, Vacuum 109, 170 (2014).
M. Ebrahimi, M. H. Sohi, A. H. Raouf and F. Mahboubi, Surf. Coat. Technol. 205, S261 (2010).
Acknowledgments
This work was supported by the Technology Innovation Program (No. 10067499, Development of a low pressure carburizing furnace and process with 30% higher energy efficient and a capacity of 1 ton) funded by the Ministry of Trade, Industry & Energy (MOTIE, Korea).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Park, H., Lee, H., Moon, K. et al. Wear Properties of a Sulfnitrided Layer Formed on AISI 4140 Steel by Using Plasma Treatments. J. Korean Phys. Soc. 74, 880–884 (2019). https://doi.org/10.3938/jkps.74.880
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.3938/jkps.74.880