Abstract
Analysis of the wear for a cold-stamping tool indicates that quenching of the tool with intermediate tempering increase tool life by a factor of 2–3.
Similar content being viewed by others
REFERENCES
Okolovich, G.A., Shtampovye stali dlya kholodnogo deformirovaniya metallov: Monografiya (Die Steels for Cold Deformation of Metals: Monograph), Barnaul: Altaisk. Gos. Tekh. Univ., 2010.
Brykov, M.N., Efremenko, V.G., and Efremenko, A.V., Iznosostoikost’ stalei i chugunov pri abrazivnom iznashivanii (Wear Resistance of Steels and Cast Iron During Abrasive Wear), Kherson: D.S. Grin’, 2014.
Gol’dshtein, M.I., Grachev, S.V., and Veksler, Yu.G., Spetsial’nye stali (Special Steels), Moscow: Mosk. Inst. Stali Splavov, 1999.
Mukhamedov, A.A., The influence of the thermal history on the structure and properties of steel, Phys. Met. Metallogr., 1992, vol. 74, no. 5, pp. 482–487.
Yugai, S.S., Kleiner, L.M., Shatsov, A.A., and Mitrokhovich, I.N., Structural heredity in low-carbon martensitic steels, Met. Sci. Heat Treat., 2004, vol. 46, pp. 539–544. https://doi.org/10.1007/s11041-005-0015-5
Berdiev, D.M., Umarova, M.A., and Toshmatov, R.K., Phase and structural transformations of structural steels in nontraditional heat treatment, Russ. Eng. Res., 2021, vol. 41, no. 1, pp. 46–48.
Yugai, S.S., Kleiner, L.M., Shatsov, A.A., and Mitrokhovich, I.N., Structural heredity in low-carbon martensitic steels, Met. Sci. Heat Treat., 2004, vol. 46, pp. 539–544.
Dyuchenko, S.S., Heredity in phase transformation: mechanism of the phenomenon and effect on the properties, Met. Sci. Heat Treat., 2000, vol. 42, nos. 3–4, pp. 122–126.
Berdiev, D.M. and Yusupov, A.A., Improving the wear resistance of gear teeth by cyclic quenching with inductive heating, Russ. Eng. Res., 2020, vol. 40, pp. 473–475. https://doi.org/10.3103/S1068798X20060064
Bataev, V.A., Bataev, A.A., and Alkhimov, A.P., Metody strukturnogo analiza materialov i kontrolya kachestva detalei (The Structural Analysis of Materials and Quality Control of the Parts), Moscow: Nauka, 2007.
Gorelik, S.S., Skakov, Yu.A., and Rastorguev, LN., Rentgenograficheskii i elektronno-opticheskii analiz (X‑Ray and Electron-Optical Analysis), Moscow: Mosk. Inst. Stali Splavov, 1994.
Zolotorevskii, V.S., Mekhanicheskie svoistva metallov (Mechanical Properties of Metals), Moscow: Mosk. Inst. Stali Splavov, 1998.
Berdiev, D.M. and Yusupov, A.A., Influence of cyclic heating modes on the wear resistance of steel, IJMAM, 2022, Issue 11, pp. 77–83.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by B. Gilbert
About this article
Cite this article
Berdiev, D.M., Yusupov, A.A., Toshmatov, R.K. et al. Increasing Die Durability in Cold Stamping by Quenching with Intermediate Tempering. Russ. Engin. Res. 42, 1011–1013 (2022). https://doi.org/10.3103/S1068798X22100057
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X22100057