Abstract
Dimensional plastic microgrinding of hard structured minerals is considered. A mathematical model is proposed for controlling the dimensional plastic microgrinding of superhard and brittle materials when machining complex surfaces to optical standards on a CNC machine tool. Equations are derived for real-time calculation of the state of the machining system and correcting the cutting conditions.
Similar content being viewed by others
REFERENCES
Panin, V.E., Fizika khrupkogo razrusheniya. Chast’ 1 (Physics of Brittle Fracture), Kiev: IMP Akad. Nauk UkrSSR, 1976, part 1, pp. 3–16.
Kon’shin, A.S., Orlov, A.Yu., Inozemtsev, A.L., and Prodedovich, Yu.V., RF Patent 2123627, 1995.
Gleiver, Z.Sh., Samonastraivayushchiesya sistemy aktivnogo kontrolya razmerov (Self-Adjusting Active Size Control Systems), Moscow: Mashinostroenie, 1978.
Epifanov, V.I., Pesina, A.Ya., and Zykov, L.V., Tekhnologiya obrabotki almazov v brillianty (Processing of Diamonds into Brilliants), Moscow: Vysshaya Shkola, 1987.
Epifanov, G.I., Fizika tverdogo tela (Solid State Physics), Moscow: Vysshaya Shkola, 1965.
Kon’shin, A.S., Control of grinding to improve performance and accuracy in simultaneous multi-tool processing, Extended Abstract of Cand. Sci. (Eng.) Dissertation, Moscow: Exp. Sci.-Res. Inst. Met. Cutting Mach., 1987.
Kon’shin, A.S., Bobrin, V.I., and Golubev, I.V., RF Patent 2035287, 1991.
Kon’shin, A.S., Sil’chenko, O.B., and Snow, B.D., RF Patent 2165837, 2001.
Kon’shin, A.S., Sil’chenko, O.B., and Teplova, T.B., New technology of cutting of hard structural minerals on CNC grinding machine modules, Gorn. Mash. Avtomat., 2001, no. 11, pp. 31–33.
Sil’chenko, O.B., A method and equipment requirements for defect-free (plastic) dimensional cutting of brittle materials, Extended Abstract of Cand. Sci. (Eng.) Dissertation, Moscow: Exp. Sci.-Res. Inst. Met. Cutting Mach., 1995.
Sil’chenko, O.B., Theory and methods of dimensionally-controlled and defect-free cutting of solid-structural minerals, Extended Abstract of Doctoral (Eng.) Dissertation, Moscow: Exp. Sci.-Res. Inst. Met. Cutting Mach., 2000.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by B. Gilbert
About this article
Cite this article
Sil’chenko, O.B. Producing Nanometer Surfaces on Hard Structural Materials. Russ. Engin. Res. 42, 383–386 (2022). https://doi.org/10.3103/S1068798X2204027X
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X2204027X